Z201L252R00AB datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Passive components> The resistor> Z201L252R00AB

Z201L252R00AB: DescriptionFixed Resistor, Metal Foil, 0.6W, 252ohm, 300V, 0.05% +/-Tol, -.2,.2ppm/Cel, 3011,; CategoryPassive components The resistor; File Size2MB，8 Pages; ManufacturerVishay; Websitehttp://www.vishay.com

Download Datasheet Parametric View All

Z201L252R00AB Overview

Fixed Resistor, Metal Foil, 0.6W, 252ohm, 300V, 0.05% +/-Tol, -.2,.2ppm/Cel, 3011,

Z201L252R00AB Parametric

Parameter Name	Attribute value
Is it Rohs certified?	incompatible
Objectid	861185041
Reach Compliance Code	compliant
Country Of Origin	Israel
ECCN code	EAR99
YTEOL	10
structure	Rectangular
Lead diameter	0.644 mm
Lead length	25.4 mm
lead spacing	5.08 mm
Number of terminals	2
Maximum operating temperature	175 °C
Minimum operating temperature	-55 °C
Package height	8.28 mm
Package length	7.62 mm
Package shape	RECTANGULAR PACKAGE
Package form	Radial
Package width	2.67 mm
method of packing	Bulk
Rated power dissipation(P)	0.6 W
resistance	252 Ω
Resistor type	FIXED RESISTOR
series	Z201
size code	3011
technology	METAL FOIL
Temperature Coefficient	0.2 ppm/°C
Tolerance	0.05%
Operating Voltage	300 V

Preview

Download Datasheet

View All

Z Series (Z-Foil)

Vishay Foil Resistors

Ultra High Precision Z-Foil Though-Hole Resistor

with TCR of ± 0.05 ppm/°C, Tolerance of ± 0.005 % (50 ppm),

Load Life Stability of ± 0.005 %

FEATURES



Temperature coefficient of resistance (TCR):

- ± 0.05 ppm/°C nominal (0 °C to + 60 °C)

- ± 0.2 ppm/°C nominal (- 55 °C to + 125 °C,

+ 25 °C ref.) (see table 1)



Rated power: to 1 W at + 125 °C (see table 2)



Resistance tolerance: to ± 0.005 % (50 ppm)



Load life stability: ± 0.005 % at 70 °C, 2000 h or ±0.015%

at 70°C,10000 h (see table 4)



Resistance range: 5

to

600 k



Vishay Foil Resistors are not restricted to standard values;

specific “as required” values can be supplied at no extra

cost or delivery (e.g. 1K2345 vs. 1K)



Total accumulated change in resistance over life (EOL)

or Total Error Budget < 0.1 % (or better with PMO)**



Electrostatic discharge up to 25 000 V



Non-inductive, non-capacitive design



Rise time: 1 ns effectively no ringing



Current noise:

≤

0.010 µV

RMS

/V of applied voltage (< - 40

dB)



Thermal EMF: 0.05 µV/°C typical



Voltage coefficient: < 0.1 ppm/V



Low inductance: < 0.08 µH typical



Thermal stabilization time < 1 s (to reach within 10 ppm of

steady state value)



Pattern design minimizing hot spots



Terminal finish: lead (Pb)-free or tin/lead alloy



Matched sets are available per request



(TCR tracking: to 0.5 ppm/°C)



Prototype quantities available in just 5 working days

or sooner. For more information, please contact

foil@vishaypg.com

INTRODUCTION

The Bulk Metal

Foil resistor is based on a special

thermo-metalic stress concept wherein a proprietary bulk

metal cold rolled foil is cemented to a ceramic substrate. It is

then photoetched into a resistive pattern. Then it is laser

adjusted to any desired value and tolerance. Because the

metals used are not drawn, wound or mistreated in any way

during manufacturing process, the Bulk Metal Foil resistor

maintains all its design, physical and electrical

characteristics while winding of wire or sputtering does not.

Z foil resistors achieve maximum stability and near-zero

TCR. These performance characteristics are built-in for

every unit, and do not rely on screening or other artificial

means for uniform performance.

The stability of a resistor depends primarily on its history of

exposures to temperature. Stability is affected by:

1. Reversible changes in the ambient temperature and heat

from adjacent components (defined by the Temperature

Coefficient of Resistance, or TCR)

2. Short-term steady-state self-heating (defined by Power

TCR or PCR)

3. Irreversible destabilizing shock of suddenly-applied

power

4. Long-term exposure to applied power (load-life stability)

5. Repetitive stresses from being switched on and off

In very high-precision resistors, these effects must be taken

into account to achieve high stability with changes in load

(Joule Effect) and ambient temperature.

Vishay Foil Resistors’ new Z-Foil technology provides an

order of magnitude reduction in the Bulk Metal Foil

element’s sensitivity to temperature changes - both external

and internal. This technology provides TCR of

± 0.05 ppm/°C nominal (instrument range: 0 °C to +60 °C),

± 0.2 ppm/°C nominal (military range: - 55 °C to + 125 °C,

+ 25 °C ref), and a PCR of 5 ppm at rated power.

In order to take full advantage of this TCR improvement, it is

necessary to take into account the differences in the

resistor’s response to each of the above-mentioned effects.

The Z series has been developed to successfully deal with

these factors.

TABLE 1 - NOMINAL TCR AND MAX. SPREAD

(- 55 °C to + 125 °C, + 25 °C ref.)

VALUE

100



to 600 K



to < 100



to < 80



to < 50



to < 25



to < 10



STANDARD

TOLERANCE

± 0.005 %

± 0.01 %

± 0.02 %

± 0.05 %

NOMINAL TCR AND

MAX. SPREAD

(ppm/°C)

± 0.2 ± 0.6

± 0.2 ± 0.8

± 0.2 ± 1.0

± 0.2 ± 1.3

± 0.2 ± 1.6

± 0.2 ± 2.3

* Pb containing terminations are not RoHS compliant, exemptions may apply

** See PMO page 5

Document Number: 63187

Revision: 22-Oct-13

For any questions, contact:

foil@vishaypg.com

www.vishayfoilresistors.com

Recommended Resources

This application circuit of LM135-235-335c

AX-165 DC arc welding machine circuit

DC power amplifier composed of STK4036X1

RTS751 circuit

STK459 audio IC circuit diagram

Portable CO detection circuit using dual-electrode sensor

msp430 g2553 help! I want to make a key capture interrupt. .: I want to make a capture interrupt, capture the timer value when the key is pressed, and capture the timer value again when the key is released, but I don't know how to set the TIMER at the beginning....; wjy254834508 Microcontroller MCU

Windows CE startup problem: I customized an image myself and have successfully downloaded it to the target board. I want to automatically start the touch screen calibration program after Windows CE starts. I know that the system...; lhmymc Embedded System

Show the process of WEBENCH design + high-pass filter design: In the WEBENCH design software, enter the passband, cutoff frequency and other information of the filter you want to design, and follow the steps to select the appropriate filter circuit, as shown in ...; hanskying666 Analogue and Mixed Signal

Together we can achieve reliable operation of GaN: One thing I’ve often wondered is why our industry isn’t working more collaboratively to accelerate the deployment and adoption of gallium nitride (GaN) transistors; after all, no one can escape the cl...; maylove Analogue and Mixed Signal

Optimal solution for nano-measurement: This article has explored only a few of the many applications of nanotechnology [1] and the measurements that must be taken to gain a deeper understanding of the devices and materials being studied. N...; Jack_ma Test/Measurement

The compiler used to learn MFC is VS: The compiler used to learn MFC is VS. Can you provide a good book?...; zhugjbest Embedded System

Shortcut: 00 01 02 03 04 05 06 07 08 09 0A 0C 0F 0J 0L 0M 0R 0S 0T 0Z 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 1H 1K 1M 1N 1P 1S 1T 1V 1X 1Z 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 2G 2K 2M 2N 2P 2Q 2R 2S 2T 2W 2Z 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 3G 3H 3J 3K 3L 3M 3N 3P 3R 3S 3T 3V 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4M 4N 4P 4S 4T 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5E 5G 5H 5K 5M 5N 5P 5S 5T 5V 60 61 62 63 64 65 66 67 68 69 6A 6C 6E 6F 6M 6N 6P 6R 6S 6T 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7M 7N 7P 7Q 7V 7W 7X 80 81 82 83 84 85 86 87 88 89 8A 8D 8E 8L 8N 8P 8S 8T 8W 8Y 8Z 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9F 9G 9H 9L 9S 9T 9W

Popular Components