within 5°C of the specified classification temperature (T
C
)
Ramp-down rate (T
p
to T
smax
)
Time 25°C to peak temperature
Reflow cycles
*Tolerance
for peak profile temperature (T
P
) is defined as a supplier minimum and a user maximum.
Sn-Pb Eutectic
Assembly
100°C
150°C
60 - 120 sec.
3°C/sec. max
183°C
60 - 150 sec.
see Table 1
20 sec.
6°C/sec. max
6 min. max
2 max
Pb-Free
Assembly
150°C
200°C
60 - 120 sec.
3°C/sec. max
217°C
60 - 150 sec.
see Table 2
30 sec.
6°C/sec. max
8 min. max
2 max
**Tolerance
for time at peak profile temperature (t
p
) is defined as supplier minimum and a user maximum.
ATTENTION:
Abracon LLC’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products
are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability where component failure could result in loss of life
and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon LLC is required. Please contact
In the workplace, learning advanced theories and delving into difficult techniques are not difficult for people in the workplace. As long as you are willing to work hard, you can conquer the fortress....
raw-os + yaffs2 + fatfs vc transplant is good news for file system enthusiasts. Even without a development board, you can still use vc simulation to enjoy the joy of learning. If you like it, please g...
Generally, serial data communication has clock and data, and is different from asynchronous and synchronous. There are single-wire, dual-wire and triple-wire communication. I2C is definitely 2-wire (n...
I use the QQ2440 development board. After burning a system nk.bin to the development board from the nor flash, it starts normally. Then, when I shut down and start from the nand flash, it stays on the...