Note: A 0.01 Ohm addition to be added to the performance of all resistors <10 Ohms.
Pulse Performance Data
Lightning Surge
Lightning surge resistors are tested in accordance with IEC 60 115-1 using both 1.2/50µs and 10/700µs pulse shapes. 10 pulses are applied. The limit of
acceptance is a shift in resistance of less than 1% from the initial value.
2512
2010
1206
0805
0603
2512
2010
1206
0805
0603
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
The single impulse graph is the result of 50 impulses of rectangular shape applied at one minute intervals. The limit of acceptance was a shift in
resistance of less than 1% from the initial value.
2512
2010
1206
0805
0603
Continuous Load Due to Repetitive Pulses
The continuous load graph was obtained by applying repetitive rectangular pulses where the pulse period was adjusted so that the average
power dissipated in the resistor was equal to its rated power at 70°C. Again the limit of acceptance was a shift in resistance of less than 1% from the
initial value
2512
2010
1206
0805
0603
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
Do you want to enter the studio and communicate with the main engineer face to face? Do you want to walk in front of the camera and directly participate in the video recording process? Do you want to ...
If you are a beginner in programming, you can still buy this, it is very affordable. I tried it myself [b]Arduino UNO R3 IDE is still very easy to use, very convenient, the routine can be directly cal...
In order to improve the efficiency of the drawing board, I hope someone can give me a PROTEL-specific PCB package database for switching power supplies;
Thank you so much... If you are from the same c...
For example: Many 2410 external interface structures are defined in C:\WINCE500\PLATFORM\SMDK2410\Inc\s2410.h, such as IOP, SPI, etc. The SPI register port is defined as follows: // // SPI // #define ...
Does anyone know what is the minimum temperature that an infrared detector can detect? What is the approximate wavelength of radiation emitted by an object at room temperature?...
Suggestions & Announcements
京公网安备 11010802033920号
EEWORLD
