Note: A 0.01 Ohm addition to be added to the performance of all resistors <10 Ohms.
Pulse Performance Data
Lightning Surge
Lightning surge resistors are tested in accordance with IEC 60 115-1 using both 1.2/50µs and 10/700µs pulse shapes. 10 pulses are applied. The limit of
acceptance is a shift in resistance of less than 1% from the initial value.
2512
2010
1206
0805
0603
2512
2010
1206
0805
0603
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
The single impulse graph is the result of 50 impulses of rectangular shape applied at one minute intervals. The limit of acceptance was a shift in
resistance of less than 1% from the initial value.
2512
2010
1206
0805
0603
Continuous Load Due to Repetitive Pulses
The continuous load graph was obtained by applying repetitive rectangular pulses where the pulse period was adjusted so that the average
power dissipated in the resistor was equal to its rated power at 70°C. Again the limit of acceptance was a shift in resistance of less than 1% from the
initial value
2512
2010
1206
0805
0603
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
Rs estimation is achieved by injecting DC current into the d-axis. At this time, if the magnetic field formed by the stator and the rotor magnetic field of the injected current are not in the same dir...
[img=600,0]http://www.stmcu.org/module/forum/data/attachment/forum/201606/30/152849mrg4v42svtjs878t.jpg[/img] [font=宋体][color=#444444][backcolor=rgb(255, 255, 255)][size=14px][size=4]It’s still the or...
The top 5 most popular blogs of 2021 focus on Ultra-Wideband (UWB), 5G and Vehicle-to-Everything (V2X) technologies that help us connect, Brushless DC motor control that puts power delivery in our han...
[img]http://hi.eeworld.net/attachment/201002/27/4187366_1267276358omMb.jpg[/img] Image address: http://hi.eeworld.net/attachment/201002/27/4187366_1267276358omMb.jpg Please help me analyze why the two...
A single-chip microcomputer is also called a single-chip microcontroller. It is not a chip that completes a certain logical function, but a computer system integrated into one chip. In general, a c...[Details]
Microchip's PIC18F46J50 is a low-power, high-performance 8-bit USB microcontroller (MCU) using nanoWatt XLP technology. The current in deep sleep mode can be as low as 13nA, the operating voltage i...[Details]
Two simple circuits are implemented to drive two LEDs from a battery powered microprocessor.
This design is based on a circuit that uses three resistors and a microprocessor I/O pin as an input h...[Details]
Battery life is critical for portable applications. For applications such as smoke detectors, security devices, and thermostats, factory-installed batteries need to last for more than 10 years. The...[Details]
Microcalorimetry
is used to determine energy relationships. Microcalorimetry techniques are often required when performing calorimetric experiments with small sample sizes or slow heating rat...[Details]
introduction
MEMS is a high-tech that has flourished on the basis of integrated circuit production technology and dedicated micro-electromechanical processing methods. Pressure sensors develop...[Details]
With concerns about the growing energy crisis, motor efficiency has become an important and timely topic. This is because motors use 63% to 70% of the electricity produced in the United States and ...[Details]
0 Introduction
Ultrasonic waves
are mechanical waves with a frequency of more than 20KHz, and the propagation speed in the air is about 340 m/s (at 20°C). Ultrasonic waves can be gene...[Details]
introduction
Belt drive is a common transmission device used in industrial production. Its commonly used speed detection device is a photoelectric encoder installed at the rotating end of th...[Details]
Since the implementation of the self-weight toll collection system, the highway administration has not only high requirements for the vehicle axle recognition rate, but also requires a long service li...[Details]
As the automobile consumer market heats up, the safety performance of automobiles has attracted more attention from consumers. When driving at high speed, tire failure is the most worrying and diff...[Details]
Background
The proliferation of ultra-low-power wireless sensor nodes for measurement and control purposes, combined with new energy harvesting techniques, has made it possible to create ful...[Details]
The construction of voltage and current feedback amplifier application circuits is generally the same, except for a few key points.
Current feedback amplifiers have higher sl...[Details]
Tags: Intelligent Video Video Surveillance HD Video
Currently, intelligent video analysis technology is gaining more and more attention in the security industry, and many projects have...[Details]
Power over Ethernet
(POE) Overview
POE (Power Over Ethernet) refers to the technology that can provide DC power to some IP-based terminals (such as IP phones, wireless LAN access points ...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
