PRODUCTS
FIXED THICK FILM CHIP RESISTORS
TYPE
ＭＣＲ１０
Series
PAGE
1/14
SPECIFICATION
PRODUCTS: FIXED THICK FILM CHIP RESISTORS
TYPE: MCR10 FZP SERIES
ROHM CO., LTD．RESISTOR DIV．
DESIGN
CHECK
APPROVAL
DATE:
30/OCT/2012
REV. ０３８Ｅ
SPECIFICATION No.：ＭＣＲ１０Ｎ－ＩＢ
TSZ22111½04½002
PRODUCTS
FIXED THICK FILM CHIP RESISTORS
TYPE
ＭＣＲ１０
Series
PAGE
2/14
< Specifications (Precautions and Prohibitions) >
●
Safety Precautions
1) The products are designed and produced for application in ordinary electronic equipment (AV equipment,
OA equipment, telecommunication equipment, home appliances, amusement equipment, etc.).
If the products are to be used in devices requiring extremely high reliability (medical equipment,
transport equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment
including car accessories, safety devices, etc.) and whose malfunction or operational error may endanger
human life and sufficient fail-safe measures, please consult with the ROHM sales staff in advance. If
product malfunctions may result in serious damage, including that to human life, sufficient fail-safe
measures must be taken, including the following:
[a] Installation of protection circuits or other protective devices to improve system safety
[b] Installation of redundant circuits in the case of single-circuit failure
2) The products are designed for use in a standard environment and not in any special environments.
Application of the products in a special environment can deteriorate product performance. Accordingly,
verification and confirmation of product performance, prior to use, is recommended if used under the
following conditions:
[a] Use in various types of liquid, including water, oils, chemicals, and organic solvents
[b] Use outdoors where the products are exposed to direct sunlight, or in dusty places
[c] Use in places where the products are exposed to sea winds or corrosive gases, including
Cl
2
, H
2
S, NH
3
, SO
2
, and NO
2
[d] Use in places where the products are exposed to static electricity or electromagnetic waves
[e] Use in proximity to heat-producing components, plastic cords, or other flammable items
[f] Use involving sealing or coating the products with resin or other coating materials
[g] Use involving unclean solder or use of water or water-soluble cleaning agents for cleaning after
soldering
[h] Use of the products in places subject to dew condensation
3) The products are not radiation resistant.
4) Verification and confirmation of performance characteristics of product, after on-board mounting, is
advised.
5)In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse)is
Applied, confirmation of performance characteristics after on-board mounting is strongly recommended.
Avoid applying power exceeding normal rated power; exceeding the power rating under steady-state
Loading condition may negatively affect product performance and reliability.
6) De-rate Power Dissipation(Pd)depending on Ambient temperature(Ta).
7) Confirm that operation temperature is within the specified range described in product specification.
8) Product may be damaged when the impact, such as downfall is given.
9) Failure induced under deviant condition from what defined in the product specification can be not be
Guaranteed.
10)When product safety related problems arises, please immediately inform to ROHM, and consider
technical counter measure.
REV.：
０３８Ｅ
SPECIFICATION No.：ＭＣＲ１０Ｎ－ＩＢ
TSZ22111½05½002
PRODUCTS
FIXED THICK FILM CHIP RESISTORS
TYPE
ＭＣＲ１０
Series
PAGE
3/14
< Specifications (Precautions and Prohibitions) >
●
Precaution for Mounting/Circuit board design
1) When a highly active halogenous (chlorine, bromine, etc.)flux is used, the remainder of flux may
negatively affect product performance and reliability.
2)In principle, the reflow soldering method must be used; if flow soldering method is preferred,please
Consult with the company in advance.
3) Pay attention to the soldering condition in order to avoid problems due to silver absorption into solder.
4) Be careful when pick up the products with tweezers.
There may be a case that the overcoat and /or the body can be chipped.
5) Soldering tip shall not touch the product when install product manually.
●
Precautions Regarding Application Examples and External Circuits
1) If change is made to the constant of an external circuit, allow a sufficient margin due to variations of the
characteristics of the products and external components, including transient characteristics, as well as
static characteristics.
2) The application examples, their constants, and other types of information contained herein are applicable
only when the products are used in accordance with standard methods. Therefore, if mass production is
intended, sufficient consideration to external conditions must be made.
●
Precaution for Electrostatic
This product is Electrostatic sensitive product, which may be damaged due to Electrostatic discharge.
Please take proper caution during manufacturing and string so that voltage exceeding Product maximum
rating won’t be applied to products. Please take special care under dry condition(e.g. Grounding of human
body /equipment /solder iron, isolation from charged objects, setting of Ionizer, friction prevention and
temperature /humidity control).
●
Precaution for strage/Transportation
1)Product performance and soldered connections may deteriorate if the products are stored in the following
places:
[a] Where the products are exposed to sea winds or corrosive gases, including Cl
2
, H
2
S, NH
3
, SO
2
,
and NO
2
[b] Where the temperature or humidity exceeds those recommended by the Company
Temperature:5―40℃, Humidity 30―80% (Put condition for individual product)
[c] Storage in direct sunshine or condensation
[d] Storage in high Electrostatic
2) Even under ROHM recommended storage condition, solderability of products over 1 year old
(Put condition for each product)may be degraded.
It is strongly recommended storage time period.
½Recommended
storage condition：Temperature 5―40℃, Humidity 30―80%(Put condition for
individual product)
3) Store / transport cartons in the correct direction, which is indicated on a carton as a symbol.
Otherwise bent leads may occur due to excessive stress applied when dropping of a carton..
●
Precaution for product label
QR code printed on ROHM product label is only for internal use, and please do not use at customer site.
It might contain a internal part number that is inconsistent with an product part number.
●
Precaution for disposition
When disposing products please dispose them properly with a industry waste company.
●
Precautions for Foreign exchange control regulation
ROHM has not determined whether or not the products are considered “a controlled product or
labor ” as specified in the Foreign Exchange and Foreign Trade Control Law.
Accordingly, if exportation of the products, either separately or integrated in another company’s
products, is intended, or giving the products to persons who are not residents is planed, additional steps
are required, based upon the appropriate regulations.
REV.：
０３８Ｅ
SPECIFICATION No.：ＭＣＲ１０Ｎ－ＩＢ
TSZ22111½05½002
PRODUCTS
FIXED THICK FILM CHIP RESISTORS
TYPE
ＭＣＲ１０
Series
PAGE
4/14
< Specifications (Precautions and Prohibitions) >
●
Prohibitions Regarding Industrial Property
1) These Specifications contain information related to the ROHM industrial property. Any use of them
other than pertaining to the usage of appropriate products is not permitted. Duplication of these
Specifications and its disclosure to a third party without the Company’s permission is prohibited.
2) Information and data on products, including application examples, contained in these specifications are
simply for reference; the Company does not guarantee any industrial property rights, intellectual property
rights, or any other rights of a third party regarding this information or data. Accordingly, the Company
does not bear any responsibility for:
[a] infringement of the intellectual property rights of a third party
[b] any problems incurred by the use of the products listed herein.
3) The Company prohibits the purchaser of its products to exercise or use the intellectual property rights,
industrial property rights, or any other rights that either belong to or are controlled by the Company, other
than the right to use, sell, or dispose of the products.
●
Other Matters
1) Please sign these Specifications and return one copy to the Company.
If a copy is not returned within three months after the issued date specified on the front page of these
Specifications, the Company will consider the Specifications accepted.
2) If any matter related to these Specifications needs to be clarified, discussions shall be held promptly
between the two parties concerned to determine the issue.
REV.：
０３８Ｅ
SPECIFICATION No.：ＭＣＲ１０Ｎ－ＩＢ
TSZ22111½05½002
PRODUCTS
FIXED THICK FILM CHIP RESISTORS
TYPE
ＭＣＲ１０
Series
PAGE
5/14
1.SCOPE
This specification covers the characteristics of
“MCR10
series (including jumper type)”based
of thick film chip resistors in ROHM Co., Ltd. products.
2.CLASSIFICATION
MCR10
TYPE
PACKAGING
CODE
FZP
FZP
PACKAGING CODE
J , F *
TOLERANCE
□□□
(□) *
RESISTANCE
*Jumper is
「J
000」
VALUE (IEC CODE)
QUANTITY
10,000pcs/reel
TOLERANCE
F(±1%)
J(±5%)
F
J
PACKAGE
268mm(10.5inch)reel, paper tape(4mm pitch)
RESISTANCE VALUE
4 digits
F
3 digits
J
3.RATING
ITEMS
RATED
POWER
CONDITIONS
For resistors operated at the ambient temperature in
excess of 70℃, the load shall be derated in accordance with Fig.1
Fig.1
100
80
60
40
20
0
(%)
SPECIFICATIONS
0.125W(1/8W)
at 70℃
-55
0
70
155
Ambient temperature
RATED
VOLTAGE
(℃)
Rated voltage is determined from the following.
When rated voltage exceeds the limiting element voltage,
the limiting element voltage shall be the rated voltage.
P×R
E: RATED VOLTAGE (V)
P: RATED POWER (W)
R: RESISTANCE
(Ω)
See Table.1
Table.1
TOLERANCE
F(±1%)
J(±5%)
E =
LIMITING ELEMENT VOLTAGE
150V
RESISTANCE
TEMPERATURE
-55℃½+155℃
RESISTANCE RANGE
(Ω)
TEMPERATURE(ppm/℃)
COEFFICIENT
Jumper type
RESISTANCE
MAX.50mΩ
RATED CURRENT
2A
TEMPERATURE
-
55℃½+155℃
RANGE
10≦R≦2.2M (E24,E96)
1.0≦R＜10 (E24)
10
≦R≦10M
(E24)
±100
±400
±200
REV.：
０３８Ｅ
SPECIFICATION No.：ＭＣＲ１０Ｎ－ＩＢ
TSZ22111½05½002
京公网安备 11010802033920号
EEWORLD
