Note: A 0.01 Ohm addition to be added to the performance of all resistors <10 Ohms.
Pulse Performance Data
Lightning Surge
Lightning surge resistors are tested in accordance with IEC 60 115-1 using both 1.2/50µs and 10/700µs pulse shapes. 10 pulses are applied. The limit of
acceptance is a shift in resistance of less than 1% from the initial value.
2512
2010
1206
0805
0603
2512
2010
1206
0805
0603
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
The single impulse graph is the result of 50 impulses of rectangular shape applied at one minute intervals. The limit of acceptance was a shift in
resistance of less than 1% from the initial value.
2512
2010
1206
0805
0603
Continuous Load Due to Repetitive Pulses
The continuous load graph was obtained by applying repetitive rectangular pulses where the pulse period was adjusted so that the average
power dissipated in the resistor was equal to its rated power at 70°C. Again the limit of acceptance was a shift in resistance of less than 1% from the
initial value
2512
2010
1206
0805
0603
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
I have an LED that needs to be driven, 6.5V, 20mA. I need to make a driver that can control the current. I don't need to adjust it continuously, I just need to switch between 0mA and 20mA. What is the...
At this stage, many friends, especially those who have just graduated from school, like to use Protell99. I feel that this software is really good, but many of my friends are not optimistic about it a...
I have a display panel, but I don't know what it can be used for. What can I DIY? My cousin gave it to me. It is said to be a Samsung panel, used for car display. I don't have any information.
AboveI ...
Seeking prawn advice:The emulator model is as the title says, and it has always worked. I tried several boards (6713 and 6747), and they all reported JTAG errors. As follows:SC_ERR_PATH_BROKEN -233The...