Integrated Device Technology, Inc. reserves the right to make changes to its products or specifications at any time, without notice, in order to improve design or performance
and to supply the best possible product. IDT does not assume any responsibility for use of any circuitry described other than the circuitry embodied in an IDT product. The
Company makes no representations that circuitry described herein is free from patent infringement or other rights of third parties which may result from its use. No license is
granted by implication or otherwise under any patent, patent rights or other rights, of Integrated Device Technology, Inc.
CODE DISCLAIMER
Code examples provided by IDT are for illustrative purposes only and should not be relied upon for developing applications. Any use of the code examples below is completely
at your own risk. IDT MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE NONINFRINGEMENT, QUALITY, SAFETY OR SUITABILITY
OF THE CODE, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICU-
LAR PURPOSE, OR NON-INFRINGEMENT. FURTHER, IDT MAKES NO REPRESENTATIONS OR WARRANTIES AS TO THE TRUTH, ACCURACY OR COMPLETENESS
OF ANY STATEMENTS, INFORMATION OR MATERIALS CONCERNING CODE EXAMPLES CONTAINED IN ANY IDT PUBLICATION OR PUBLIC DISCLOSURE OR
THAT IS CONTAINED ON ANY IDT INTERNET SITE. IN NO EVENT WILL IDT BE LIABLE FOR ANY DIRECT, CONSEQUENTIAL, INCIDENTAL, INDIRECT, PUNITIVE OR
SPECIAL DAMAGES, HOWEVER THEY MAY ARISE, AND EVEN IF IDT HAS BEEN PREVIOUSLY ADVISED ABOUT THE POSSIBILITY OF SUCH DAMAGES. The code
examples also may be subject to United States export control laws and may be subject to the export or import laws of other countries and it is your responsibility to comply with
any applicable laws or regulations.
LIFE SUPPORT POLICY
Integrated Device Technology's products are not authorized for use as critical components in life support devices or systems unless a specific written agreement pertaining to
such intended use is executed between the manufacturer and an officer of IDT.
1. Life support devices or systems are devices or systems which (a) are intended for surgical implant into the body or (b) support or sustain life and whose failure to perform,
when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user.
2. A critical component is any components of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device
or system, or to affect its safety or effectiveness.
IDT, the IDT logo, and Integrated Device Technology are trademarks or registered trademarks of Integrated Device Technology, Inc.
About This Manual
®
Notes
Overview
This user manual includes hardware and software information on the 89HPES12NT12G2, a member of
IDT’s PRECISE™ family of PCI Express® switching solutions offering the next-generation I/O interconnect
standard.
Finding Additional Information
Information not included in this manual such as mechanicals, package pin-outs, and electrical character-
istics can be found in the data sheet for this device, which is available from the IDT website
(www.idt.com)
as well as through your local IDT sales representative.
Content Summary
Chapter 1, “PES12NT12G2 Device Overview,”
provides an introduction to the performance capabili-
ties of the 89HPES12NT12G2 and a high level architectural overview of the device.
Chapter 2, “Clocking,”
provides a description of the PES12NT12G2 clocking architecture.
Chapter 3, “Reset and Initialization,”
describes the PES12NT12G2 reset operations and initialization
procedure.
Chapter 4, “Switch Core,”
provides a description of the PES12NT12G2 switch core.
Chapter 5, “Switch Partitions,”
describes how the PES12NT12G2 supports up to 4 active switch parti-
tions.
Chapter 6, “Failover,”
provides a description of the flexible failover mechanism that allows the
construction of highly-available systems.
Chapter 7, “Link Operation,”
describes the operation of the link feature including polarity inversion,
link width negotiation, and lane reversal.
Chapter 8, “SerDes,”
describes basic functionality and controllability associated with the Serialiazer-
Deserializer (SerDes) block in PES12NT12G2 ports.
Chapter 9, “Power Management,”
describes the power management capability structure located in the
configuration space of each PCI-to-PCI bridge in the PES12NT12G2.
Chapter 10, “Transparent Operation,”
describes the device-specific architectural features for the
transparent switch associated with each PES12NT12G2 partition (i.e., the PCI-to-PCI bridge functions and
their interaction in the switch).
Chapter 11, “Hot-Plug and Hot-Swap,”
describes the behavior of the hot-plug and hot-swap features
in the PES12NT12G2.
Chapter 12, “SMBus Interfaces,”
describes the operation of the 2 SMBus interfaces on the
PES12NT12G2.
Chapter 13, “General Purpose I/O,”
describes how the 9 General Purpose I/O (GPIO) pins may be
individually configured as general purpose inputs, general purpose outputs, or alternate functions.
Chapter 14, “Non-Transparent Operation,”
describes how a non-transparent bridge in the
PES12NT12G2 allows two roots or PCI Express trees (i.e., hierarchies) to be interconnected with one or
more shared address windows between them.
Chapter 15, “DMA Controller,”
describes how the PES12NT12G2 supports two direct memory access
controller (DMA) functions.
PES12NT12G2 User Manual
1
July 10, 2013
IDT
Notes
Chapter 16, “Switch Events,”
describes mechanisms provided by the PES12NT12G2 to facilitate
communication between roots associated with different partitions as well as for communication between
these roots and a management agent.
Chapter 17, “Multicast,”
describes how the multicast capability enables a single TLP to be forwarded
to multiple destinations.
Chapter 18, “Temperature Sensor,”
provides a description of the on-chip temperature sensor with
three programmable temperature thresholds and a temperature history capability.
Chapter 19, “Register Organization,”
describes the organization of all the software visible registers in
the PES12NT12G2 and provides the address space for those registers.
Chapter 20, “PCI to PCI Bridge and Proprietary Port Specific Registers,”
lists the Type 1 configura-
tion header registers in the PES12NT12G2 and provides a description of each bit in those registers.
Chapter 21, “Proprietary Registers,”
lists the proprietary registers in the PES12NT12G2 and provides
a description of each bit in those registers.
Chapter 22, “NT Endpoint Registers,”
lists the NT Endpoint registers in the PES12NT12G2 and
provides a description of each bit in those registers.
Chapter 23, “DMA Registers,”
lists the DMA registers in the PES12NT12G2 and provides a descrip-
tion of each bit in those registers.
Chapter 24, “Switch Control Registers,”
lists the switch control and status registers in the
PES12NT12G2 and provides a description of each bit in those registers.
Chapter 25, “JTAG Boundary Scan,”
discusses an enhanced JTAG interface, including a system logic
TAP controller, signal definitions, a test data register, an instruction register, and usage considerations.
Chapter 26, “Usage Models,”
describes possible configurations of the PES12NT12G2 switch and
presents some important system usage models.
Signal Nomenclature
To avoid confusion when dealing with a mixture of “active-low” and “active-high” signals, the terms
assertion and negation are used. The term assert or assertion is used to indicate that a signal is active or
true, independent of whether that level is represented by a high or low voltage. The term negate or negation
is used to indicate that a signal is inactive or false.
To define the active polarity of a signal, a suffix will be used. Signals ending with an ‘N’ should be inter-
preted as being active, or asserted, when at a logic zero (low) level. All other signals (including clocks,
buses and select lines) will be interpreted as being active, or asserted when at a logic one (high) level.
To define buses, the most significant bit (MSB) will be on the left and least significant bit (LSB) will be on
the right. No leading zeros will be included.
Throughout this manual, when describing signal transitions, the following terminology is used. Rising
edge indicates a low-to-high (0 to 1) transition. Falling edge indicates a high-to-low (1 to 0) transition. These
terms are illustrated in Figure 1.
PES12NT12G2 User Manual
2
July 10, 2013
IDT
Notes
single clock cycle
1
2
3
4
high-to-low
transition
low-to-high
transition
Figure 1 Signal Transitions
Numeric Representations
To represent numerical values, either decimal, binary, or hexadecimal formats will be used. The binary
format is as follows: 0bDDD, where “D” represents either 0 or 1; the hexadecimal format is as follows:
0xDD, where “D” represents the hexadecimal digit(s); otherwise, it is decimal.
The compressed notation ABC[x|y|z]D refers to ABCxD, ABCyD, and ABCzD.
The compressed notation ABC[y:x]D refers to ABCxD, ABC(x+1)D, ABC(x+2)D,... ABCyD.
Data Units
The following data unit terminology is used in this document.
Term
Byte
Word
Doubleword (DWord)
Quadword (QWord)
Words
1/2
1
2
4
Bytes
1
2
4
8
Bits
8
16
32
64
Table 1 Data Unit Terminology
In quadwords, bit 63 is always the most significant bit and bit 0 is the least significant bit. In double-
words, bit 31 is always the most significant bit and bit 0 is the least significant bit. In words, bit 15 is always
the most significant bit and bit 0 is the least significant bit. In bytes, bit 7 is always the most significant bit
and bit 0 is the least significant bit.
The ordering of bytes within words is referred to as either “big endian” or “little endian.” Big endian
systems label byte zero as the most significant (leftmost) byte of a word. Little endian systems label byte
zero as the least significant (rightmost) byte of a word. See Figure 2.
I have recently been working on a logistics robot for an engineering training competition, using Mecanum wheels. Since this is the first time I have controlled a small vehicle, I have never performed ...
Keyword: [b]Wireless Camera[/b] Half a year ago, I bought a wireless camera for laptops. After using it for half a year, I felt that the effect was very good. It happened that a friend wanted to buy a...
How do I write my own application and burn it to the board after cross-compiling it? Should I make a file image with the file system and burn it? Or configure a samba server and mount it like a normal...
It can be compiled in the YC2440 DevelopBorad environment, but it fails to compile under the STANDARDSDK, prompting error LNK2019: unresolved external symbol SipShowIM referenced in function "..." Is ...
The wireless communication devices we use in daily life all contain MAC addresses. MAC addresses are unique. Usually in network communications , MAC addresses are used as device identifiers. MAC addre...
[Original] How do I handle the interface between F149 and RS485? How do I reduce the 5V high level output by 485 to a level that 149 can withstand? Thank you...
If the ultimate form of a car is a silicon-based life form, then in
the field of
intelligent driving
, it has gradually taken on the appearance of a "veteran driver." In
the field of
the ...[Details]
Abstract:
With the increasing complexity of smart vehicle electrical and electronic architectures, the full lifecycle management of vehicle electronic control components faces multiple challe...[Details]
Reflow soldering, a common soldering method in modern electronics manufacturing, primarily melts solder paste and pads to form solder joints. With technological advancements, soldering equipment ha...[Details]
"Have you set your calendar reminder?"
On August 24, Nvidia Robotics' official account posted a photo of a black gift box on a social media platform, with an attached greeting card sig...[Details]
Amidst the wave of intelligent automotive transformation, advanced driver assistance is gradually emerging from cutting-edge technology into the mainstream, becoming a new frontier of industry comp...[Details]
On August 22, Lantu Motors officially launched its Lanhai Intelligent Hybrid technology via an online livestream. This intelligent hybrid technology, which integrates a full-range 800V high-voltage...[Details]
On August 21st, Zhiyuan Robotics revealed at its first partner conference that it expects shipments to reach thousands of units this year and tens of thousands next year. The company hopes to reach...[Details]
Overview
As handheld voice communication devices become more and more popular, they are increasingly used in noisy environments, such as airports, busy roads, crowded bars, etc. In such noisy ...[Details]
Charging is a familiar process for new energy vehicles, and as a source of battery energy, charging piles are crucial. New energy vehicle charging can be divided into fast charging and slow chargin...[Details]
During daily operation of an R-type power transformer, the voltage used varies as the equipment being used adjusts. This raises the question: can the transformer change voltage at this point? The a...[Details]
Intel®
Xeon®
6
-
core processors now support the new Amazon EC2 R8i and R8i-flex instances on Amazon Web Services (AWS).
These new instances offer superior performance and fast...[Details]
Tires are a very important component for cars. They are related to the driving experience of the vehicle. We are almost inseparable from cars in our daily lives. For tires, according to the role of...[Details]
Most cameras on the market use chips manufactured by Japanese companies like Sony, Sharp, Panasonic, and LG. South Korea now has the capability to produce chips, but the quality is somewhat inferio...[Details]
With the continuous development of ultrasonic technology, ultrasound has been widely used in fields such as inspection, cleaning, welding, and medical treatment, and has even found its way into tex...[Details]
Reasons for the wear of the roller press reducer shaft:
1. Since the expansion sleeve is subjected to a large torque, the mating surfaces of the shaft and the sleeve move relative to each other...[Details]
Robotics Development
京公网安备 11010802033920号
EEWORLD
