The target machine platform is PXA270+WINCE5.0. 1. The target machine can recognize the U disk, and files can be copied from the U disk to the target machine, and files can also be copied from the PC ...
Since about the 1980s, many industry experts have claimed that analog circuits have reached a dead end and digital applications will shine in the electronics world, including integrated circuits (ICs)...
The description of the problem is rather long-winded, please take a look! I am using CC2510 and using the sleep timer to implement time slot timing. The complete time slot is 40ms. On the host side, t...
This is a circuit composed of two 555 timers. IC1 is connected as a monostable circuit, and IC2 is connected as a multivibrator circuit. When a finger touches the touch pad M, a trigger pulse is added...
Dear experts, I have no experience in learning MCU, and I want to start learning FPGA directly. Because the laboratory requires the use of ISE development platform and related tools, please recommend ...
[i=s]This post was last edited by jameswangsynnex on 2015-3-3 20:01[/i] [align=left] [/align][align=left]I have recently been very interested in the topic of IoT appliances. I found a student work iSt...
1. Introduction
RFID (radio frequency identification) is a non-contact automatic identification technology that emerged in the 1990s. It uses the characteristics of radio frequency signal prop...[Details]
Analog engineers have traditionally struggled with complexity when designing power supplies that required multiple outputs, dynamic load sharing, hot-swap, or extensive fault-handling capabilities....[Details]
introduction
In the discharge process of tokamak plasma physics, the study of rupture and sawtooth is of great significance. Rupture and sawtooth exist in most tokamaks. Rupture is a notew...[Details]
The reason for the light decay of white LEDs: the decline of phosphor performance
So far, the rapid decline of the luminous performance of white light LEDs, especially low-power white light LE...[Details]
Electronic systems are located at different points on the automotive power bus and therefore often need to operate under very stringent power requirements. These include load dump, cold crank, very lo...[Details]
In the previous series, we have listed some basic knowledge of C language in Tables 1 to 3. We hope that beginners can strengthen their memory of the above tables and gradually learn to use them wh...[Details]
1. System Structure
This system is a simulation system of indoor air-conditioning temperature/humidity control system. The data acquisition and control center collects temperature/humidity...[Details]
1. Introduction
Testing the temperature of steel billets before rolling is an important measure to ensure the quality of steel. Traditional manual testing is difficult to ensure product qu...[Details]
Problems such as the depletion of natural resources, air pollution, traffic congestion, and rising fossil fuel prices have forced societies and individuals to seek alternative means of transportati...[Details]
Motors, especially those with brushes, generate a lot of noise. This noise must be dealt with if the appliance is to meet the requirements of EMC standards. The means to solve EMC are nothing more ...[Details]
According to the Industrial Technology Research Institute of Taiwan, due to factors such as the oil crisis and global warming, the issues of energy conservation and environmental protection have at...[Details]
hint:
The number of speakers and their spacing limit the sound field of a portable stereo system.
Spatial audio attempts to artificially recreate the experience of listening to sounds i...[Details]
The serial interface real-time clock chip DS1302 launched by Dallas Company in the United States can trickle charge the backup battery of the clock chip. Due to the main features of the chip such a...[Details]
1 Basic Features
In computer control systems and various intelligent instruments and meters composed of single-chip microcomputers (or microprocessors), various external analog signals must be ...[Details]