and a true fail-safe receiver, guaranteeing a logic-high
receiver output when inputs are shorted or open. Hot-
swap capability eliminates undesired transitions on the
bus during power-up or hot insertion.
The transceiver draws 1.9mA (typ) supply current when
unloaded or when fully loaded with the drivers disabled
and draws less than 10µA (max) of supply current in low-
power shutdown mode.
The MAX14783E is available in 8-pin µMAX, 8-pin SO,
and small, 8-pin (3mm x 3mm) TDFN-EP packages.
The device in the TDFN-EP package operates over the
-40°C to +125°C temperature range. The MAX14783E in
the µMAX and SO packages operates over the -40°C to
+85°C and -40°C to +125°C temperature ranges.
Benefits and Features
• High ESD Protection
±35kV HBM ESD
● Integrated Protection Increases Robustness
±20kV Air Gap IEC 61000-4-2 ESD
±12kV IEC 61000-4-2 Contact ESD
• Short-Circuit Protected Outputs
• True Fail-Safe Receiver
• Hot-Swap Capability
● 3V to 5.5V Supply Voltage Range
● High-Speed Data Rates up to 42Mbps
● -40°C to +125°C Operating Temperature
● Allows Up to 32 Transceivers on the Bus
● Low 10µA (max) Shutdown Current
● Saves Board Space
• Available in 8-pin µMAX, SO, and TDFN-EP
Packages
Applications
●
●
●
●
Motion Controllers
Field Bus Networks
Encoder Interfaces
Backplane Busses
Ordering Information/Selector Guide
PART
MAX14783EEUA+
MAX14783EESA+
MAX14783EATA+
MAX14783EASA+
MAX14783EAUA+
SUPPLY RANGE
3.0V to 5.5V
3.0V to 5.5V
3.0V to 5.5V
3.0V to 3.6V
3.0V to 5.5V
3.0V to 3.6V
3.0V to 5.5V
DATA RATE (MAX)
30Mbps
40Mbps
42Mbps
42Mbps
16Mbps
42Mbps
6Mbps
TEMP RANGE
-40°C to +85°C
-40°C to +85°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
PIN-PACKAGE
8 µMAX
8 SO
8 TDFN-EP*
8 SO
8 µMAX
+Denotes lead(Pb)-free/RoHS-compliant package.
*EP = Exposed paddle.
19-6734; Rev 0; 6/13
MAX14783E
High-Speed 3.3V/5V RS-485/RS-422 Transceiver
with ±35kV HBM ESD Protection
Absolute Maximum Ratings
(Voltages referenced to GND.)
V
CC
.....................................................................-0.3V to +6.0V
RO ............................................................ -0.3V to (V
CC
+ 0.3V)
RE,
DE, DI
............................................................-0.3V to +6.0V
A, B (V
CC
≥ 3.6V)
.............................................-8.0V to +13.0V
A, B (V
CC
< 3.6V)
.............................................-9.0V to +13.0V
Short-Circuit Duration (RO, A, B) to GND
.................Continuous
Operating Temperature Range
MAX14783EE_ ............................................... -40°C to +85°C
MAX14783EA_ ............................................. -40°C to +125°C
Junction Temperature ......................................................+150°C
Storage Temperature Range ............................
-65°C
to +150°C
Continuous Power Dissipation (T
A
= +70°C)
µMAX (derate at 4.8mW/°C above +70°C) .................387mW
SO (derate at 7.6mW/°C above +70°C)
......................606mW
TDFN-EP (derate at 24.4mW/°C above +70°C) ........1951mW
Lead Temperature (soldering, 10s)
................................. +300ºC
Soldering Temperature (reflow) ...................................... +260°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these
or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect
Provides a way to inspect the behavior of a running system. It was originally designed to characterize uasyncio programs, but can also be used to study any code whose behavior may change dynamically, ...
Moderator, hello!I learned about the function of using USB to read peripheral audio signals for software decoding at your recent press conference. I am very interested in this, but I have the followin...
[code]#include
int time=0;//counting time int flag=0;//boot code flag int count=1;//counting digits int cel=0;//decoding completed flag//unsigned char num[10]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,...
[i=s] This post was last edited by sxy02203 on 2014-3-3 18:34 [/i] Dear brothers, I am a beginner and I have some questions to ask. These days, I used LM2596-5.0 to make a 12V to 5V circuit. I used TI...
This is my first time dealing with this stuff. I have a question for you. I downloaded AN2659 from ST official website: STM8S in-application programming (IAP) using a customized bootloader. There are ...
As the number of cars increases, environmental pressures are also increasing. At this time, some people are saying that new energy vehicles are energy-efficient and environmentally friendly, and ar...[Details]
With the rapid development of technology, automotive intelligence is increasing at an unprecedented rate. This not only enhances vehicle functionality and comfort, but also places higher deman...[Details]
Multi-touch mobile phone
Multi-touch is a system that can respond to multiple touches on the screen at the same time. Multi-touch phones are divided into capacitive and resistive types. Capaci...[Details]
Today's security industry has entered the era of massive networking. Many enterprises, especially financial institutions, have established multi-level video surveillance networking platforms. Lever...[Details]
According to foreign media reports, secondary battery materials company POSCO Future M announced that it has successfully developed two experimental (prototype) positive electrode materials for the...[Details]
The automotive industry in 2025 is undergoing a thorough intelligent reshuffle.
Geely wants to make changes in the field of AI cockpits: in the future, there will be no traditional smart...[Details]
This paper proposes a temperature real-time transmission and display solution based on LED optical data transmission, with Jingwei Yager low-power FPGA HR (Yellow River) series as the main controll...[Details]
introduction
Sonar imaging is of great significance in marine resource development and defense. Its long range, intuitive display of the observed area, and target identification make it widely...[Details]
Electric vehicles' 12V batteries don't rely on a generator to power them. Only gasoline-powered vehicles rely on the engine to drive a generator to generate electricity while driving, which is used...[Details]
1. Multi-channel DAC technology bottleneck
Currently,
the development of multi-channel DAC technology focuses on two core challenges.
First, industrial applications urgently ...[Details]
Chinese characters are extensive and profound, and there are many different names for ESD tubes. How many of them do you know?
As far as I know, ESD diodes are currently known as ESD p...[Details]
Lightweighting of automobiles is still a relatively unfamiliar term for automobiles. With the continuous improvement of environmental protection requirements, relevant regulations have also put for...[Details]
introduction
With the development of the information superhighway and the internet, broadcast television has become increasingly widespread worldwide. Television information has emerged in var...[Details]
Most cameras on the market use chips manufactured by Japanese companies like Sony, Sharp, Panasonic, and LG. South Korea now has the capability to produce chips, but the quality is somewhat inferio...[Details]
Traditionally, electrical energy is transmitted primarily through wires, requiring direct physical contact between the power source and the load. With the increasing number of electrical devices in...[Details]
MicroPython Open Source section
京公网安备 11010802033920号
EEWORLD
