BU-64743F9-301S datasheet, PDF

Datasheet> All Categories > The embedded processor and controller> Microcontrollers and processors> BU-64743F9-301S

BU-64743F9-301S: DescriptionMil-Std-1553 Controller, CMOS; CategoryThe embedded processor and controller Microcontrollers and processors; File Size2MB，98 Pages; ManufacturerData Device Corporation

Download Datasheet Parametric View All

BU-64743F9-301S Overview

Mil-Std-1553 Controller, CMOS

BU-64743F9-301S Parametric

Parameter Name	Attribute value
Objectid	1329760004
package instruction	QFF,
Reach Compliance Code	compliant
Country Of Origin	Taiwan, USA
YTEOL	7.45
Other features	LG-MAX; WD-MAX, ALSO SUPPORTS MIL-STD-1553A
Address bus width	16
boundary scan	NO
maximum clock frequency	12 MHz
letter of agreement	MIL-STD-1553B
Data encoding/decoding methods	BIPH-LEVEL(MANCHESTER)
Maximum data transfer rate	0.125 MBps
External data bus width	16
JESD-30 code	S-CQFP-F80
length	22.606 mm
low power mode	YES
Number of serial I/Os	2
Number of terminals	80
Maximum operating temperature	70 °C
Minimum operating temperature
Package body material	CERAMIC, METAL-SEALED COFIRED
encapsulated code	QFF
Package shape	SQUARE
Package form	FLATPACK
Maximum seat height	3.302 mm
Maximum supply voltage	3.6 V
Minimum supply voltage	3 V
Nominal supply voltage	3.3 V
surface mount	YES
technology	CMOS
Temperature level	COMMERCIAL
Terminal form	FLAT
Terminal pitch	1.016 mm
Terminal location	QUAD
width	22.606 mm
uPs/uCs/peripheral integrated circuit type	SERIAL IO/COMMUNICATION CONTROLLER, MIL-STD-1553

Preview

Download Datasheet

View All

Make sure the next

Card you purchase

has...

BU-6474X/6484X/6486X

MINI-ACE

MARK3/MICRO-ACE

*-TE

FEATURES

•

Fully Integrated 3.3 or 5.0 Volt, 1553

A/B Notice 2 Terminal

•

World’s First all 3.3 Volt Terminal

•

Transceiver Power-Down Options

•

World’s Smallest CQFP MIL-STD-1553

Device

•

80-pin Ceramic Flat/Gull Wing

Package or 324-Ball BGA Package

•

Enhanced Mini-ACE Architecture

•

Multiple Configurations:

- RT-only, 4K RAM

- BC/RT/Monitor, 4K RAM

DESCRIPTION

The Mini-ACE Mark3 and Micro-ACE-TE are the world's first MIL-STD-1553

terminals which can be powered entirely by +3.3 volts, thus eliminating the

need for a +5 volt power supply. With a package body of 0.880 inches square

and a gull wing "toe-to-toe" dimension of 1.110 inches, the Mini-ACE Mark3

is the industry's smallest ceramic gull-lead 1553 terminal. At 0.815 inches

square, the Micro-ACE-TE (BGA package) provides the smallest industry

footprint, enabling its use in applications where PC board space is at a pre-

mium.

These devices integrate dual 3.3 or 5 volt transceivers, 3.3 or 5.0 volt protocol

logic, and either 4K or 64K words of internal RAM. The architecture is identi-

cal to that of the Enhanced Mini-ACE, and most features are functionally and

software compatible with the previous Mini-ACE (Plus) and ACE genera-

tions.

A salient feature of the Mini-ACE Mark3 and Micro-ACE-TE is the advanced

bus controller architecture. This provides methods to control message sched-

uling, the means to minimize host overhead for asynchronous message

insertion, facilitate bulk data transfers and double buffering, and support

various message retry and bus switching strategies.

The remote terminal architecture provides flexibility in meeting all common

MIL-STD-1553 protocols. The choice of RT data buffering and interrupt

options provides robust support for synchronous and asynchronous messag-

ing, while ensuring data sample consistency and supporting bulk data trans-

fers. The monitor mode provides true message monitoring, and supports fil-

tering on an RT address/T-R bit/subaddress basis.

The Mini-ACE Mark3 and Micro-ACE-TE incorporate fully autonomous built-

in self-tests of internal protocol logic and RAM. The terminals provide

the

same flexibility in host interface configurations as the ACE/Mini-ACE, along

with a reduction in the host processor's worst case holdoff time.

- BC/RT/Monitor, 64K RAM

•

Supports 1553A/B Notice 2, McAir,

STANAG 3838 Protocols

•

MIL-STD-1553, McAir, and MIL-

STD-1760 Transceiver Options

•

Highly Flexible Host Side Interface

•

Compatible With Mini-ACE and ACE

Generations

•

Highly Autonomous BC with Built-In

Message Sequence Controller

•

Choice of Single, Double, and

Circular RT Buffering Options

•

Selective Message Monitor

•

Comprehensive Built-In Self-Test

•

Choice Of 10, 12, 16, or 20 MHz Clock

Inputs

•

Software Libraries and Drivers

available for Windows® 9x/2000/XP,

Windows NT®, VxWorks® and Linux

•

Available with Full Military

Temperature Range and Screening

FOR MORE INFORMATION CONTACT:

Technical

INFORMATION CONTACT:

FOR MORE

Support:

1-800-DDC-5757 ext. 7771

Technical Support:

1-800-DDC-5757 ext. 7771

Data Device Corporation

105 Wilbur Place

Bohemia, New York 11716

631-567-5600 Fax: 631-567-7358

www.ddc-web.com

subject to one or more patents pending.

All trademarks are the property of their respective owners.

The technology used in DDC’s Micro-ACE series of products may be

Recommended Resources

Typical wiring of three-terminal fixed integrated voltage regulator a

Liquid crystal display circuit of 1 and 1/2 azimuth BCD code

Amplifier lamp adjustment circuit

Muscle stretch detector circuit

Stepless voltage regulation circuit assembled with two ordinary thyristors

Pillow school circuit

How to implement the automatic reply function of short messages: If the user is on a call and does not want to be disturbed, when the system receives an incoming call, it will automatically send a short message to the other party according to the short message pres...; 100111 Embedded System

cc2531-usbDongle communicates with PC (similar to serial port debugging assistant): I want to use CC2531USB dongle as a coordinator to connect CC2530 nodes, and hope to debug it through the serial port on a PC. I downloaded the example of cc2531-usbDongle from TI's official website, ...; 两年 RF/Wirelessly

How to handle C programs in floating-point chips and fixed-point chips: My program runs perfectly correctly in vc. Now I have transplanted it to 6711. I haven't yet involved any data exchange with the outside. I just want the program to complete the task that was previous...; mingluo_1234 Analogue and Mixed Signal

PCB grounding design specifications worth seeing!: Grounding Design Specifications and GuidelinesPCB grounding design...; btty038 PCB Design

I want to connect the ARM2410 development board to the LCD screen commonly used for microcontrollers. Is it possible?: RT, the development board originally comes with an 8-inch TFT screen, but I want to replace the screen with the circular dot matrix LCD screen commonly used on microcontrollers. However, I looked at t...; unsettled ARM Technology

How is nios designed?: Recently I used quatus to make a board that needed many I/O ports, but the chip I chose at the beginning did not have many I/O ports, so I wanted to make a NIOS core in the FPGA and send data to the n...; yanghui_45 Embedded System

Shortcut: L0 L1 L2 L3 L4 L5 L6 L7 L8 L9 LA LB LC LD LE LF LG LH LI LJ LK LL LM LN LO LP LQ LR LS LT LU LV LW LX LY LZ M0 M1 M2 M3 M4 M5 M6 M7 M8 M9 MA MB MC MD ME MF MG MH MI MJ MK ML MM MN MO MP MQ MR MS MT MU MV MW MX MY MZ N0 N1 N2 N3 N4 N5 N6 N7 N8 NA NB NC ND NE NF NG NH NI NJ NK NL NM NN NO NP NQ NR NS NT NU NV NX NZ O0 O1 O2 O3 OA OB OC OD OE OF OG OH OI OJ OK OL OM ON OP OQ OR OS OT OV OX OY OZ P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 PA PB PC PD PE PF PG PH PI PJ PK PL PM PN PO PP PQ PR PS PT PU PV PW PX PY PZ Q1 Q2 Q3 Q4 Q5 Q6 Q8 Q9 QA QB QC QE QF QG QH QK QL QM QP QR QS QT QV QW QX QY R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 RA RB RC RD RE RF RG RH RI RJ RK RL RM RN RO RP RQ RR RS RT RU RV RW RX RY RZ

Popular Components