(*) Unit for output at stroke ends is millivolt per volt of input voltage
(**) Requires special reduced core length
SENSOR SOLUTIONS
/// MHR Series Rev. 8
07/2017
Page 2
MHR SERIES
Miniature General Purpose AC LVDT
ENVIRONMENTAL SPECIFICATIONS & MATERIALS
Operating temperature
Shock survival
Vibration tolerance
Housing material
Electrical connection
IEC 60529 rating
-65°F to +300°F [-55°C to 150°C]
1,000 g (11ms half-sine)
20 g up to 2KHz
AISI 400 Series stainless steel
Six lead-wires, 32 AWG stranded Copper, PTFE insulated, 1 foot [0.3m] long
(longer wires optional)
IP61
Notes:
All values are nominal unless otherwise noted
Electrical specifications are for the test frequency indicated in the table
Dimensions are in inch [mm] unless otherwise noted
FR: Full Range is the stroke range, end to end; FR=2xS for ±S stroke range
FRO (Full Range Output): Algebraic difference in outputs measured at the ends of the range
MECHANICAL SPECIFICATIONS
Parameter
Body length “A”
Core length “B”
Body weight
Core weight
oz
[g]
oz
[g]
MHR 005
0.375
[9.5]
0.180
[4.6]
0.07
[2]
0.004
[0.1]
MHR 010
0.535
[13.6]
0.233
[5.9]
0.11
[3]
0.007
[0.2]
MHR 025
0.660
[16.8]
0.400
[10.2]
0.18
[5]
0.016
[0.5]
MHR 050
0.815
[20.7]
0.500
[12.7]
0.21
[6]
0.016
[0.5]
MHR 100
0.990
[25.1]
0.625
[15.9]
0.21
[6]
0.025
[0.7]
MHR 250
1.850
[47.0]
1.125
[28.6]
0.32
[9]
0.032
[0.9]
MHR 500
3.300
[83.82]
2.000
[50.8]
0.60
[17]
0.056
[1.6]
MHR 1000
5.600
[142.2]
3.000
[76.2]
0.92
[26]
0.088
[2.5]
MHR 2000
8.000
[203.2]
3.00
[76.2]
1.4
[40]
0.088
[2.5]
Dimensions are in inch [mm]
SENSOR SOLUTIONS
/// MHR Series Rev. 8
07/2017
Page 3
MHR SERIES
Miniature General Purpose AC LVDT
WIRING INFORMATION
Connect Blue to Green for differential output
ORDERING INFORMATION
Description
±0.005 inch LVDT
±0.010 inch LVDT
±0.025 inch LVDT
±0.05 inch LVDT
±0.10 inch LVDT
Model
MHR 005
MHR 010
MHR 025
MHR 050
MHR 100
Part Number
02560405-000
02560406-000
02560407-000
02560408-000
02560409-000
Description
±0.25 inch LVDT
±0.5 inch LVDT
±1 inch LVDT
±2 inch LVDT
Model
MHR 250
MHR 500
MHR 1000
MHR 2000
Part Number
02560410-000
02560411-000
02560412-000
02561033-000
OPTIONS
5.0 kHz calibration
10 kHz calibration
Metric threaded core
10 foot long lead-wires
XXXXXXXX
-002
XXXXXXXX
-003
XXXXXXXX
-006
Consult factory
XXXXXXXX
-040
Note: Add multiple option dash numbers together to determine proper ordering suffix
Example: MHR 1000, ±1 inch, with 5 kHz calibration and metric threaded core, P/N 02560412-008
ACCESSORIES
Core connecting rod,
Core connecting rod,
Core connecting rod,
Core connecting rod,
Core connecting rod,
Core connecting rod,
Mounting block
6 inches long, 1-72 threads
12 inches long, 1-72 threads
24 inches long, 1-72 threads
36 inches long, 1-72 threads
6 inches long, M2x0.4 metric threads
12 inches long, M2x0.4 metric threads
05282945-006
05282945-012
05282945-024
05282945-036
05282976-006
05282976-012
04560954-000
SENSOR SOLUTIONS
/// MHR Series Rev. 8
07/2017
Page 4
MHR SERIES
Miniature General Purpose AC LVDT
NORTH AMERICA
Measurement Specialties, Inc.,
a TE Connectivity company
Tel: 800-522-6752
Email:
customercare.frmt@te.com
EUROPE
Measurement Specialties (Europe), Ltd.,
a TE Connectivity Company
Tel: 800-440-5100
Email:
customercare.bevx@te.com
ASIA
Measurement Specialties (China) Ltd.,
a TE Connectivity company
Tel: 0400-820-6015
Email:
customercare.shzn@te.com
TE.com/sensorsolutions
Measurement Specialties, Inc., a TE Connectivity company.
Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein
might be trademarks of their respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes
no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard
Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse
of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application.
High efficiency and low standby power consumption are two major challenges in today's switching power supply design. Resonant topology or LLC topology is becoming increasingly popular because it ca...[Details]
introduction
my country has a vast territory and a large population. The scale of housing construction is huge, and the amount of residential construction is large and wide. It is still on t...[Details]
The Portable Digital Data Acquisition System (PDDAS) uses LabVIEW Real-Time and PXI to control the wind tunnel test and record air pressure data from 128 different channels.
"The LabVIEW Real-...[Details]
No matter which processor you are learning, the first thing you need to understand is the registers and working mode of the processor.
ARM has 37 registers, including 31 general registers and ...[Details]
The Mobile Industry Processor Interface (MIPI) Alliance is an organization responsible for promoting the standardization of software and hardware in mobile devices. It has released the D-PHY specif...[Details]
Introduction
Power subsystems are becoming more and more integrated into the overall system. Power systems have moved from being separate "essential dangerous devices" to being monitorable...[Details]
In recent years, lighting has become an important area that countries around the world are targeting to promote energy conservation and environmental protection. According to statistics, about 20% ...[Details]
My colleague and I spent the day chatting in the hotel bar. We had met with several customers. We were both wondering how come these engineers we were meeting knew almost nothing about analog techn...[Details]
1 Introduction
Ultrasonic waves have strong directivity, slow energy consumption, and can propagate over long distances in a medium, so they are used for distance measurement. Ultrasonic detec...[Details]
With the development and widespread application of computer technology, especially in the field of industrial control, computer communication is particularly important. Although serial communication g...[Details]
Instrument stepper motor
The stepper motor is an open-loop control element that converts electrical pulse signals into angular displacement or linear displacement. In the case of non...[Details]
In the analysis of electronic circuits, static analysis (also known as DC analysis) is the basis of circuit analysis. However, it is well known that electronic components are nonlinear, so the anal...[Details]
RS-422 and RS-485 are both serial data interface standards, which were developed and published by the Electronic Industries Association (EIA). RS-422 defines a balanced communication interface with a ...[Details]
1. Disadvantages of choosing too high a voltage level
Choosing too high a voltage level will result in too high an investment and a long payback period. As the voltage level increases, the...[Details]
京公网安备 11010802033920号
EEWORLD
