Specifications are limited by the circuit and resistance value.
Please contact us separately.
3 digits
●
Resistor Networks：RNX, RTX, RTY
RNX
Circuit
Code
RNX: Custom Resistor Network
RTX,RTY: SOT-23 Resistor network
●
Resistor Networks：RDA, RDB
RDA
Circuit
Code
RDA: Dual terminator network
RDB: Differential terminator network
Example
Q20
Package
Symbol
Package type symbol＋
Number of pins
Example
T
Terminal
Surface Material
T :Sn
TE
Taping
TE: Plastic
embossed
5001
Custom
Code
Q20
Package
Symbol
Same as above
(Except Q24, N14, N08)
T
Terminal
Surface Material
T:Sn
TE
Taping
TE: Plastic
embossed
471J
Nominal Resistance
& Tolerance of R1
3 digits G: ±2%
J : ±5%
511J
H
Contact us when you have control request for environmental hazardous material other than the substance specified by EU-RoHS.
Nominal Resistance
T.C.R.
& Tolerance of R2 （×10
−6
/K）
3 digits G: ±2%
E :±25
J : ±5%
C:±50
H:±100
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
■Ratings
Package
Package Symbol
Package Power Rating
Resistance Range
Max. Working Voltage
Rated Voltage
Rated Ambient Temp.
Operating Temp. Range
10Ω〜1kΩ
1.1kΩ〜
Q16
0.8W
QSOP
Q20
1.0W
Q24
1.0W
N08
0.4W
SOIC
N14
0.6W
N16
0.8W
SOT-23
S03
0.2W
Power Rating 200mW/Resistor Element
※1
Power Rating 50mW/Resistor Element
※1
100V
√￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣
Rated Power×Nominal Resistance Value, Rated Voltage should not exceed Max. Working Voltage.
＋70℃
−55℃〜＋125℃
※2
Above ratings are based on the thermal resistances using a multi-layer circuit board (EIA/JESD51). For mounting on a mono-layer board, power derating shall be needed. Please inquire of us about
conditions.
※1 Total power consumption of all elements should not exceed the package power rating.
※2 About operating temperature range −55℃〜＋155℃, We can provide as custom devices. Please inquire of us about it.
●Standard Resistor Networks
Circuit
Code
Circuit Schematics
（Top View）
Pin n
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
C:±50
H:±100
Resistance Range
（Ω）
E24
and Absolute Tolerance
F:±1%
G:±2%, J:±5%
100〜100k 100〜100k
51〜100k
30〜100k
n/2
51〜100k
10〜100k
Circuit
Code
Circuit Schematics
（Top View）
Pin n
R1
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
Resistance Range(Ω) (E24)
and Resistance Tolerance
G:±2%, J :±5%
Network Resistors
Pin n
RBA
R
8, 14, 16
R
20, 24
n/2
Number of Pins : n=8,16,20,24
RDA
R2
-
R1
R2
-
16, 20
C:±50
H:±100
Pin n
R1
Pin 1
Pin n
R
Pin n
Pin 1
Pin 1
n/2
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin n
Pin
:
Number of Pins
n
n=8,16,20,24
E:±25
n
100〜100k
Pin
100〜100k
R
Pin n
R1
R2
E:±25
C:±50
H:±100
RBB
R
Pin 1
n/2
Pin
8, 14, 16
20, 24
C
R
n
C:±50
R1
R
R2
R1
Pin 1
51〜100k
30〜100k
n/2
51〜100k
10〜100k
100〜40k
2R
n/2
RDB
Pin 1
R1
Pin 1
n/2
16, 20
R2
R1
Pin
Number
1
Pins
R
2
1
n/2
: n=8,16,20,24
R
of
H:±100
E:±25
C:±50
Pin 1
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin 1
Number of Pins : n=3,SOT-23 Only
Pin 1
100〜40k
Pin n
R
R
Pin n
RTX
n/2
Pin n
R
1
R
2
R
2R
2R
R
R
2
3
SOT-23
Only
2R
2R
Number of Pins : n=8,16,20,24
RLA
R
2R
2R
R
2R
2R
n/2
14, 16
H:±100
1k〜30k
H:±100
2R
51〜40k
2R
51〜40k
2R
Pin 1
Pin 1
n/2
ber of Pins : n=8,16,20
Number of Pins : n=3,SOT-23 Only
Pin 1
n/2
■Performance
Test Items
Resistance
T.C.R.
Resistance to soldering heat
Rapid change of temperature
Moisture resistance
Endurance at 70℃
High temperature exposure
Performance Requirements
ΔR±
（％＋0.05Ω）
Limit
Typical
25℃
＋25℃/−55℃, ＋25℃/125℃
260℃±5℃, 10s±1s
−55℃
（30min.）
/＋125℃
（30min.）, 100 cycles
40℃±2℃, 90〜95%RH, 1000h
1.5h ON/0.5 h OFF cycle
70℃±2℃, 1000 h
1.5 h ON/0.5 h OFF cycle
＋125℃, 1000 h
Within specified tolerance
Within specified T.C.R.
0.1
※3
0.5
※3
Test Methods
0.05
0.05
0.05
0.05
0.10
0.5
※3
0.25
※3
0.25
※3
※3 Guaranteed value differs depending on resistance value.
■Precautions for Use
・
he resistor of this product is formed by narrow patterning a thin metal film. Thus, application of excessive voltage causes burn and destruction of the resistive
T
film, abnormality in resistance or open resistance and loss of proper function. The properly and electrostatically measured taping materials are used for the
components, but attention should be paid to the fact that there is some danger the parts may be destructed by static electricity(equivalent to 500V and more at
100pF, 1.5kΩ) to cause a change in resistance in the conditions of an excessive dryness when mounting on the boards. Similarly, care should be given not to apply
the excessive static electricity at the time of mounting on the boards. When designing, consideration can be taken into withstanding ESD for customized KPC
products. Please consult with us about the details.
・Hand
soldering by iron soldering or repairment are not recommended because KPC is a multi-pin product.
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
NETWORKS
EU
RoHS
KPC RIA
KPC RNX
Isolated Resistor Networks
Custom Resistor Networks
■Applications
・
utomotives, medical instrument, industrial machines, Measurement equipment
A
・
omputers and networks
C
・
igh precision OP amp circuit, High precision voltage divider
H
■Features
・
High precision resistor networks
Combination of different resistance is available for custom circuit.
[table] [tr][td]There is a power supply system with a variable output voltage of -240V~+240V. It is necessary to detect its output status. When the output is short-circuited and there is voltage outpu...
Please help if the serial communication interface of VC5402 is connected correctly [table][tr][td] My own connection is as shown in the figure (is the serial port connection correct? Do other pins nee...
1. Hardware introduction: [b]430 digital IO port: [/b] MSP430F149 and MSP430F169 both have P1-P6, each 8-bit, totaling 48 IO ports; there are a large number of IO ports available, so the 8-bit paralle...
[color=#333333][font=punctuation, 微软雅黑, Tohoma][font=楷体, 楷体_GB2312][size=18px]MSP430WARE is an open source MSP430 hierarchical software architecture based on C++ language, supporting multiple peripher...
In recent years, as energy consumption and environmental protection issues have attracted people's attention, my country's solar photovoltaic power generation industry has shown a rapid development...[Details]
Guangdong Traffic Regulation No. 355
To all municipal transportation bureaus (commissions) above the prefecture level, provincial transportation groups, Guangdong Power Grid Compa...[Details]
Recently, the Provincial Development and Reform Commission and the Provincial Poverty Alleviation Office jointly organized the application for a number of centralized photovoltaic poverty alleviation ...[Details]
In the actual project development process, it is common to encounter modifications to the hardware circuit, and then the modified part requires the modification of the driver. Thinking about the comi...[Details]
We have come a long way from the 2G era, and now 5G is about to be commercialized. Suddenly, we realize that time has passed quickly, but technology has never stopped. The activation of 5G heralds ...[Details]
Recently, the " ZTE
incident"
caused by the Sino-US trade war
has caused heated discussions in the electronics industry. It not only reflects that Chinese companies are lagging behind in the...[Details]
Recently, there was news that the US government asked Google to shut down the Android operating system for ZTE phones. After that, some people even imagined what the consequences would be if Intern...[Details]
In Windows environment, the source code is encoded in UTF-8. If the source file created by STM32CubeMX contains Chinese comments, then using STM32CubeMX to regenerate the source code will cause the C...[Details]
1. The first project We are going to create the first project, which is mainly for project analysis, so that we can understand how CubeMX works and how to trace the code logic. Okay, no more nonsense...[Details]
1. Determination of STM32 ADC sampling frequency 1. First, read some information to determine the ADC clock: (1) The ADCCLK clock provided by the clock controller is synchronized with the PCLK2 (A...[Details]
1. Initial understanding of FSMC: FSMC consists of 4 modules: (1) AHB interface (including FSMC configuration register) (2) NOR flash memory and PSRAM controller (when driving LCD, LCD is like a PSRA...[Details]
According to MEMS Consulting, Japan's
Toshiba
will further develop its automotive
LiDAR
(laser radar) semiconductor business, mainly focusing on: (1)
light receiving elements use...[Details]
ZTE was punished, and Hou Weigui, who had already retired, had to come out of retirement again and run around to mediate. Let's follow the embedded editor to learn about the relevant content.
...[Details]
I am going to do a project recently, which requires counting the frequency and duty cycle of the external PWM signal. The chip used is STM32F207 Looking at the datasheet, I found that one of the ma...[Details]
The watchdog timer is used to prevent the program from running away due to strong interference noise caused by power supply, space electromagnetic interference or other reasons. Many microcontrollers...[Details]
Analog electronics
京公网安备 11010802033920号
EEWORLD
