Han-Power
®
S with 2x Han
®
Q 4/2
Features
•
•
•
•
•
•
Compact design saves space
No interruption of the energy supply
Leading PE contact within the insert
Assembly with standard tools
Black plastic hood, top entry
Cable to cable housings with male insert and hood with female
insert
Derating
Current carrying capacity
The current carrying capacity of the connectors is limited by the
thermal load capability of the contact element material including
the connections and the insulating parts. The derating curve
is therefore valid for currents which flow constantly (non-inter-
mittent) through each contact element of the connector evenly,
without exceeding the allowed maximum temperature.
Measuring and testing techniques acc. to IEC 60512-5-2
Technical characteristics
Operating current (A)
Number of contacts
Additional contacts
Termination method
Electrical data acc. to IEC
61984
Rated current
Rated voltage conductor-earth
Rated voltage conductor-con-
ductor
Rated impulse voltage
Pollution degree
Electrical data, signal
Rated current (signal)
Rated voltage (signal)
Rated impulse voltage (signal)
Pollution degree (signal)
Rated voltage acc. to UL
Han-
Power Rated voltage acc. to UL
(signal)
Insulation resistance
Contact resistance
Limiting temperature
Flammability acc. to UL 94
Mating cycles
Degree of protection acc. to IEC
60529
Material (hood/housing)
Colour (hood/housing)
Material (seal)
Material (locking)
Material (contacts)
4
+ 2 additional signal contacts
IDC insulation displacement
termination
40 A 400/690 V 6 kV 3
40 A
400 V
690 V
6 kV
3
10 A 250 V 4 kV 3
10 A
250 V
4 kV
3
600 V
250 V
≥10
10
Ω
≤0.3 mΩ
-40 ... +125 °C
V-0
≥500
IP65
Polycarbonate
RAL 9005 (jet black)
NBR
Polyamide
Copper alloy
Ambient temperature (°C)
① Han
®
Q 4/2 Conductor cross-section 4 mm²
② Han
®
Q 4/2 Conductor cross-section 6 mm²
Specifications and approvals
EN 60664-1
IEC 61984
Details
The Han-Power
®
S connector is suitable for the assembly of
serial power bus.
Having assembled the energy supply Han-Power
®
S can be
inserted at any place of the power cable.The cable jacket has to
be removed, the conductor is placed without interruption in the
IDC.
Han-Power
®
S is suitable for cables with single strands manu-
factured acc. to DIN VDE 0281/ EN 60228. For the distribution of
the device Han-Compact
®
hoods or cable to cable housings are
used.
This power supply has to be realized with one Han-Compact
®
cable to cable hood.
15
·
4
Domestic Chip Exchange
京公网安备 11010802033920号
EEWORLD
