Export Administration Regulation
This document may contain technical data controlled by the U.S. Export Administration Regulations, and
may be subject to the approval of the U.S. Department of Commerce prior to export. Any export, directly or
indirectly, in contravention of the U.S. Export Administration Regulation is prohibited.
Trademark Information
The STEC name, logo and design are trademarks of STEC Inc. No right, license, or interest to such
trademarks is granted hereunder, and you agree that no such right, license, or interest shall be asserted by
you with respect to such trademark. Other product and corporate names mentioned in this document are
used for identification purposes only and may be trademarks or registered trademarks of their respective
companies.
Disclaimer of Liability
The performance information and specifications furnished in this document reflect the engineering
development objectives of STEC Inc. and should be used for comparative analysis and reference purposes.
The content of this document is accurate as of the date of this publication; however, the information
contained herein, including but not limited to any instructions, descriptions and product specifications, is
subject to change without prior notice.
STEC INC. (STEC) PROVIDES NO WARRANTY WITH REGARD TO THIS DOCUMENT OR
ANY OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS
ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR PURPOSE WITH REGARD TO ANY OF THE FOREGOING. STEC ASSUMES
NO LIABILITY FOR ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY FROM ANY
TECHNICAL OR TYPOGRAPHICAL ERRORS OR OMMISSIONS CONTAINED HEREIN. IN
NO EVENT SHALL STEC BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL,
OR EXEMPLARY DAMAGES, WHETHER BASED ON TORT, CONTRACT OR OTHERWISE,
ARISING OUT OF OR IN CONNECTION WITH THIS DOCUMENT OR ANY OTHER
INFORMATION CONTAINED HEREIN OR THE USE THEREOF.
Copyright Notice
Copyright
©2007
by STEC Inc. All rights reserved. This guide is copyrighted by
STEC
Inc., with all rights
reserved. Information contained in this document, including but not limited to any instructions, descriptions
and product specifications, is company private to STEC and shall not be modified, used, copied, reproduced
or disclosed in whole or in part, in any form or by any means, electronic or mechanical, for any purpose,
without the written consent of
STEC.
ii
Zeus 2.5-Inch Serial ATA Solid State Drive
C
ONVENTIONS
The following icons are used throughout this document to identify additional information of which the
reader should be aware.
SHOCK HAZARD: This icon indicates the danger of an
electrical shock that may harm or otherwise prove
fatal to the user.
CAUTION: This icon indicates the existence of a
hazard that could result in equipment or property
damage or equipment failure if the safety instruction
is not observed.
ELECTROSTATIC DISCHARGE: This icon indicates
the possible presence of Electrostatic Discharge
(ESD or “static electricity”) that may harm the internal
electronic components. The user is advised to handle
the device only after discharging any possible
electrostatic buildup that may be present.
NOTE: This icon identifies information that relates to
the safe operation of the equipment or related items.
TIP: This icon identifies helpful hints and tips.
Zeus 2.5-Inch Serial ATA Solid State Drive
iii
R
EVISION
H
ISTORY
Revision Status Summary Sheet
Revision Date
0.1
0.2
0.3
0.4
1.0
1.1
1.2
09/01/2006
12/07/2006
03/07/2007
04/02/2007
04/20/2007
04/25/2007
06/11/2007
Sheet(s) Affected
Initial release. Title, all sheets.
Page 34 - Updated Ordering Information table.
All. Preliminary technical review.
All. Datasheet reorganized.
Official release.
Page 40 - added User-Addressable LBA Sector value for 48GB SSD in Table
11 under “Storage Capacities” topic.
Page 16 - removed SATA connector artwork (Figure 2) and updated figure
references; Page 20 - “ATA Command Flow” topic corrected; Page 49 -
updated “Operating Temperatures” table (Table 15); Page 50 - edited “Altitude
Parameters” topic; Page 52 - minor edit to Paragraph 4 of “Conformal Coating”
topic, “some component topsides”; Page 54 - minor edit to Table 22; Page 56
- added “Primary Heat Generation Area” topic.
Minor spelling and grammatical corrections throughout datasheet. Page 46 -
updated Table 13 to include 12 and 96 gigabyte user-addressable LBA sectors.
Page 62 - removed “Firmware Upgrades” topic.
All - removed all references to “2,000,000 write/erase cycles”. Minor grammar
and spelling corrections.
1.3
1.4
1.5
06/15/2007
06/28/2007
07/09/2007
Zeus 2.5-Inch Serial ATA Solid State Drive
v
Creative Market
京公网安备 11010802033920号
EEWORLD
