-
introduction
1 The significance of using RTOS on MSP430
It is understandable that it is meaningless to use RTOS on MSP430. Because the hardware resources of MSP430 are limited (for exampl...[Details]
-
Today, with the increasing integration of functions, mobile phones can also be used as portable media players (PMP), digital cameras, handheld computers (PDAs), and even global positioning systems ...[Details]
-
introduction
Throughout the history of automotive lighting, power has always played an important role. Initially, cars only needed headlights to see the road in the dark. Later, other light so...[Details]
-
I've been studying dot matrix recently. It looks simple, but it takes a while to master it completely! The 8*8 dot matrix hardware circuit I'm making now is like this. The row is driven by 74HC138 + t...[Details]
-
The rectified DC voltage is then converted back to AC using power electronics such as insulated gate bipolar transistors.
The output voltage is switched on and off at a high frequency, control...[Details]
-
a. Keep the battery clean, wipe off the spilled electrolyte, contaminated dirt and dust in time; keep the poles and terminal clamps clean and in good contact, and apply vaseline or butter to preven...[Details]
-
1 Introduction
The early stage control system used relay control. Due to the large number of stage equipment, the number of control elements is huge and the wiring is complicated. Therefore, th...[Details]
-
introduction
1 The significance of using RTOS on MSP430
It is understandable that it is meaningless to use RTOS on MSP430. Because the hardware resources of MSP430 are limited (for exampl...[Details]
-
Abstract: In a digital signal processing system with DSP as the core, analog-to-digital conversion is an important part of the system. Taking
TMS320C6203B and ADS5422 of
Texas Instruments
...[Details]
-
The ICLS60*X series ICs launched by Infineon contain four devices, namely ICLS6021J, ICLS6022J, ICLS6022G and ICLS6023J. This series of devices are suitable for building offline single-stage power fac...[Details]
-
1 Introduction
Today, as integrated circuit design technology has entered the fourth generation, an electronic system or subsystem can be fully integrated on a chip, that is, system-on-chip (SOC) in...[Details]
-
Compared with other air conditioning systems, ground source heat pump systems have outstanding advantages. Since the temperature deep in the ground remains unchanged all year round, it is much higher ...[Details]
-
Digital storage oscilloscopes (
DSOs
) are now on almost every engineer's bench. However, many DSOs are still paired with analog real-time (ART) oscilloscopes. Why?
This is because both p...[Details]
-
For white LEDs
with a forward voltage of 3.5 to 4.2V (at 20mA),
a boost converter is usually required. A charge pump (such as MAX682 to MAX684) can be used together with MAX1916 to form
...[Details]
-
The LED chips
in
LED lamps
are electronic
components
with high heat flux density
. During operation, they generate a large amount of excess heat due to their static and ...[Details]
Analog electronics
京公网安备 11010802033920号
EEWORLD
