Visit www.abracon.com for Terms & Conditions of Sale
HC49/US (AT49) LOW PROFILE SMD
MICROPROCESSOR CRYSTAL
ABLS3
Pb
RoHS
Compliant
OPTIONS & PART IDENTIFICATION:
(Left blank if standard)
Reduced height
to 2.5/2.6mm
to 2.5mm
11.4 x 4.7 x 2.5/2.6mm
| | | | | | | | | | | |
| | |
ABLS3 -
Frequency in MHz
Please specify the frequency
in MHz. e.g. 14.31818MHz
MHz -
-
-
-
-
Packaging
Blank: Bulk
T: Tape & Reel
Oscillation Mode
F: Fund. AT>24MHz
FB: Fund. BT>24MHz
Load Capacitance (pF)
Please specify CL
(Minimum 10pF) in pF or
S for series
Custom ESR if other
than standard
R
: Specify a value in
Ω
(e.g.: R40)
Operating Temp.
A: -10°C ~ +60°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
J*: -40°C ~ +105°C
K*: -40°C ~ +125°C
L*: -55°C ~ +125°C
Freq. Tolerance
H5: ± 5 ppm
1: ± 10 ppm
7: ± 15 ppm
2: ± 20 ppm
3: ± 25 ppm
4: ± 30 ppm
Freq. Stability
U**: ± 10 ppm
G: ± 15 ppm
X: ± 20 ppm
W: ± 25 ppm
Y: ± 30 ppm
H: ± 35 ppm
Q: ± 100 ppm
R: ± 150 ppm
NOTE: Fundamental BT frequency stability ± 100ppm max. at -10° C to +60° C only.
* Frequency stability ±50ppm, ±100ppm, ±150ppm only.
** -10 to +60C only.
Contact ABRACON for tighter frequency stability.
ABRACON IS
ISO 9001:2008
ISO 9001 / QS 9000
CE RTIFIED
Revised: 07.05.11
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000
|
fax 949-546-8001
| w ww.abracon.com
Visit www.abracon.com for Terms & Conditions of Sale
HC49/US (AT49) LOW PROFILE SMD
MICROPROCESSOR CRYSTAL
ABLS3
Pb
RoHS
Compliant
OUTLINE DRAWING:
TAPE & REEL:
T = tape and reel (1000pcs/reel)
Reduced height
to 2.5/2.6mm
to 2.5mm
11.4 x 4.7 x 2.5/2.6mm
| | | | | | | | | | | |
| | |
H: 2.5mm max for frequency 6MHz or higher
2.6mm max for frequency lower than 6MHz
Dimensions: inches (mm)
REFLOW PROFILE:
ATTENTION:
Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISO 9001:2008
ISO 9001 / QS 9000
CE RTIFIED
Revised: 07.05.11
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000
|
fax 949-546-8001
| w ww.abracon.com
Visit www.abracon.com for Terms & Conditions of Sale
Wind River Systems recently announced that it will acquire Interpeak AB for $20 million in cash and stock. Interpeak AB is a leading provider of network, security and mobile middleware software that e...
Please help me, the frequency of the triangle wave is 5KHz, the trapezoidal wave is 100 steps per cycle, symmetrical up and down, and I hope the frequency can be adjusted...
[i=s] This post was last edited by hot8012 on 2015-1-23 13:38 [/i] In AD9, how can I add a part of the schematic I drew to the library file? After selecting copy, why can't I paste it after opening th...
LIBRARY IEEE; USE IEEE.STD_LOGIC_1164.ALL; USE IEEE.STD_LOGIC_ARITH.ALL; USE IEEE.STD_LOGIC_UNSIGNED.ALL; ENTITY dat2bcd IS PORT(CLK:IN STD_LOGIC;DAT:IN STD_LOGIC_VECTOR(7 DOWNTO 0);BCDH,BCDL:OUT STD_...
[img]http://static9.photo.sina.com.cn/middle/5f4811c8g73eea5b690f8&690[/img] The circuit diagram is as shown above. It is a human body detection alarm that uses a Fresnel lens. The sensor is soldered ...
Due to the needs of the project, I need to use STM32 F407 SDIO to read high-speed TF cards and use FSMC to send data, but the reading speed has not been able to meet the requirements. After testing, I...