AVR SERIES
Output Voltages 100Vdc up to 1000Vdc at 1 Watt
Miniature, Isolated, and Regulated
The Series AVR High Voltage DCDC Converters is intended for users needing a miniature, isolated, regulated
voltage source. These 1 Watt single output units offer high regulation along with low ripple and stability. AVR
Units are protected against input Overvoltage, Output Overcurrent and Over Temperature. With no minimum load
required, units can be safely operated from No Load to Full Load. Encapsulated in a miniature case and potted,
units will operate over a temperature range of 25ºC to +70ºC with no heatsink or power derating.
These units are suitable for applications like electron beam deflection or focussing, photomultiplier tubes, piezo
transducers or any other applications requiring regulated, isolated highvoltage sources.
TYPICAL CHARACTERISTICS:
Input Voltage Ranges
5 ± 10%Vdc
12 ± 10%Vdc
24 ± 10%Vdc
28 ± 10%Vdc
Input Voltage Shutdown: Vin, nom +25%
(typical)
Output Voltage Tolerance: ± 0.25% Vout
Output Current Limit: Iout, max. +30% (typical)
Output Power: 1 Watt maximum
Internal Over Temperature Shutdown: 95ºC
Line Regulation: 0.1% Vout
Load Regulation: 0.25% Vout (for 0 to 100%
load change)
Output Overshoot: 5% Vout (for 50% to 100%
load step)
Output Recovery Time: 30ms (within 1% Vout)
Output Ripple: 0.25% Vout, peakpeak
Converter Frequency: 25 to 33kHz
Isolation: 100 Megohm (min) at 1500V dc
Temperature Coefficient: .025Vdc/ºC (typical)
Operating Temperature Range: 25ºC to +70ºC
Storage Temperature Range: 55ºC to +125ºC
*NOTE*: Data measured at 25ºC ambient and Vin, nom, after
warmup unless otherwise specified.
FEATURES:
Input/Output Isolation to 1500V
Output Regulation
Low Ripple
4 standard input voltages: 5, 12, 24, 28 Vdc
Input Over Voltage Protection
Output Over Current and Short Circuit
Protection
Remote Shutdown
1 Watt output power at 70ºC ambient with no
heat sink
Miniature case and low profile (0.500")
PC mountable
Consult factory for extended operating
temperature range Special Voltages
Environmental Screening Options Engineering
Assistance Toll Free: 8004311064
AVR SERIES
PIN
FUNCTION
#
1
2
3
4
5
+ Input
Shutdown
Input
Output
+Output
TO SHUT DOWN THE UNIT, THE VOLTAGE
BETWEEN PINS 2 AND 3 MUST BE 0.28 VDC
OR LESS. THE UNIT WILL AUTOMATICALLY
RESTARY WHEN THE CIRCUIT BETWEEN
PINS 2 AND 3 IS OPEN. PLEASE REVIEW THE
TYPICAL EXAMPLES OF SHUT DOWN
CIRCUITS BELOW.
TYPICAL TRANSIENT RESPONSE
TYPICAL START UP RESPONSE
Channel 1: 5 Volt/division, 200 ms/division
Channel 1: 200 Volt/division; 10 ms/division
Unit Tested: 5AVR1000 (5 Vin, 1000 Vout) operated
at full load.
For immediate engineering assistance or to place an
order:
Call Toll Free: 8004311064
PICO Electronics, Inc.
143 Sparks Ave., Pelham, N.Y. 108031810
Tel: 9147381400 or Fax: 9147388225
Go back to Low Profile DCDC Converter Menu
Go back to HiVoltage DCDC Converter Menu
Load Change: 100% to 0% full load
Recovery time within 0.5% Vout: 28.7ms
Unit Tested: 5AVR1000 (5 Vin, 1000 Vout).
FPGA/CPLD
京公网安备 11010802033920号
EEWORLD
