FCC Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class A computing device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which the user will be required to correct the interference at his own expense.
Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
The use of non-shielded I/O cables may not guarantee compliance with FCC RFI limits. This digital apparatus does not exceed the Class A
limits for radio noise emission from digital apparatus set out in the Radio Interference Regulation of the Canadian Department of
Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de classe A
prescrites dans le Règlement sur le brouillage radioélectrique publié par le ministère des Communications du Canada.
Warranty
IMC Networks warrants to the original end-user purchaser that this product, EXCLUSIVE OF SOFTWARE, shall be free
from defects in materials and workmanship under normal and proper use in accordance with IMC Networks' instructions
and directions for a period of six (6) years after the original date of purchase. This warranty is subject to the limitations set
forth below.
At its option, IMC Networks will repair or replace at no charge the product which proves to be defective within such
warranty period. This limited warranty shall not apply if the IMC Networks product has been damaged by unreasonable
use, accident, negligence, service or modification by anyone other than an authorized IMC Networks Service Technician
or by any other causes unrelated to defective materials or workmanship. Any replaced or repaired products or parts carry
a ninety (90) day warranty or the remainder of the initial warranty period, whichever is longer.
To receive in-warranty service, the defective product must be received at IMC Networks no later than the end of the
warranty period. The product must be accompanied by proof of purchase, satisfactory to IMC Networks, denoting
product serial number and purchase date, a written description of the defect and a Return Merchandise Authorization
(RMA) number issued by IMC Networks. No products will be accepted by IMC Networks which do not have an RMA
number. For an RMA number, contact IMC Networks at PHONE: (800) 624-1070 (in the U.S and Canada) or (949) 465-
3000 or FAX: (949) 465-3020. The end-user shall return the defective product to IMC Networks, freight, customs and
handling charges prepaid. End-user agrees to accept all liability for loss of or damages to the returned product during
shipment. IMC Networks shall repair or replace the returned product, at its option, and return the repaired or new
product to the end-user, freight prepaid, via method to be determined by IMC Networks. IMC Networks shall not be
liable for any costs of procurement of substitute goods, loss of profits, or any incidental, consequential, and/or special
damages of any kind resulting from a breach of any applicable express or implied warranty, breach of any obligation
arising from breach of warranty, or otherwise with respect to the manufacture and sale of any IMC Networks product,
whether or not IMC Networks has been advised of the possibility of such loss or damage.
EXCEPT FOR THE EXPRESS WARRANTY SET FORTH ABOVE, IMC NETWORKS MAKES NO OTHER WARRANTIES,
WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THIS IMC NETWORKS PRODUCT, INCLUDING WITHOUT
LIMITATION ANY SOFTWARE ASSOCIATED OR INCLUDED. IMC NETWORKS SHALL DISREGARD AND NOT BE
BOUND BY ANY REPRESENTATIONS OR WARRANTIES MADE BY ANY OTHER PERSON, INCLUDING EMPLOYEES,
DISTRIBUTORS, RESELLERS OR DEALERS OF IMC NETWORKS, WHICH ARE
INCONSISTENT WITH THE WARRANTY SET FORTH ABOVE. ALL IMPLIED WARRANTIES INCLUDING THOSE OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY LIMITED TO THE DURATION OF THE
EXPRESS WARRANTY STATED ABOVE.
Every reasonable effort has been made to ensure that IMC Networks product manuals and promotional materials
accurately describe IMC Networks product specifications and capabilities at the time of publication. However, because of
ongoing improvements and updating of IMC Networks products, IMC Networks cannot guarantee the accuracy of printed
materials after the date of publication and disclaims liability for changes, errors or omissions.
ii
Table of Contents
FCC Radio Frequency Interference Statement ....................................................ii
Warranty............................................................................................................ii
About the IE-Giga-MiniMc .................................................................................1
Installing the IE-Giga-MiniMc .............................................................................1
Hardware Mounting Options .............................................................................2
LED Operation...................................................................................................2
DC Power Supply Precautions............................................................................4
Specifications .....................................................................................................5
IMC Networks Technical Support.......................................................................6
Fiber Optic Cleaning Guidelines.........................................................................7
Electrostatic Discharge Precautions.....................................................................7
Safety Certifications............................................................................................8
iii
About the IE-Giga-MiniMc
The IE-Giga-MiniMc is a 10/100/1000 Auto Negotiating switching miniature media
converter. The fiber port always operates at 1000 Mbps Full Duplex; the copper port
Auto Negotiates the connected device’s speed and duplex mode: 10/100/1000 Mbps
Half Duplex; or 10 /100/1000 Mbps Full Duplex (including Flow Control). The IE-
Giga-MiniMc supports jumbo packets up to 1632 bytes.
The IE represents the unit’s use as an Industrial Ethernet device, which allows for
extended temperature operation of -25°C to +85°C (-10°C to +50°C when using the
included AC adapter).
The IE-Giga-MiniMc converter offers plug-and-play operation, including the
AutoCross feature which automatically selects between a crossover workstation and
straight-through repeater hub connection depending on the connected device.
The IE-Giga-MiniMc can use either the included IMC Networks universal, external
power adapter with 100 to 240 ±10% VAC input or can be wired directly to the 7-
50 VDC terminal block (for extended temperature configuration). There is an
optional IE-PowerTray/18 in which up to 18 IE-Giga-MiniMcs can be installed.
Installing the IE-Giga-MiniMc
The IE-Giga-MiniMc installs virtually anywhere as a standalone device in locations
with extremely limited space. Installation options include:
•
•
•
•
Velcro strips
DIN rail mounting with DIN Rail clips
A wall mount bracket
A PowerTray/18 for high density applications
Installation Tip
Several models of the IE-Giga-MiniMc support single-strand fiber for operation. Since
single-strand fiber products use optics that transmit and receive on two different
wavelengths, single-strand fiber products must be deployed in pairs. For example,
connect an IE-Giga-MiniMc, TX/SSLX-SM1310-SC (which has 1310 xmt and 1550 rcv) to a
product which has 1550 xmt and 1310 rcv, e.g. iMcV-Gigabit, TX/SSLX-SM1550-SC. The
two connected products must also have the same speed and distance capabilities (i.e.
both are single-mode [20km] or both are single/PLUS [40km]).
1
Hardware Mounting Options
The IE-Giga-MiniMc can be mounted on a DIN rail or using wall mount brackets
(shown below).
DIN rail clips (part number 806-39105) and wall mount brackets (part number 895-
39229) are available for purchase through an IMC Networks Distributor.
DIN Rail Clips
The DIN Rail clips include screws, to allow
the installation onto a DIN Rail. Install the
screws into DIN Rail clips, which should be
mounted parallel or perpendicular to the DIN
Rail. Snap the converter onto the clips. To
remove the converter from the DIN Rail, use
a flat-head screwdriver into the slot to gently
pry the converter from the rail.
NOTE
The DIN clips are designed for use on a DIN-35 rail.
LED Operation
Each IE-Giga-MiniMc converter includes two LEDs, located on the RJ-45 connector.
LED functions are as follows:
FX LNK/ACT
TX LNK/ACT
2
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
