The PDF says that 107 has 4 endpoints, why/*#define EP1_IN_Callback NOP_Process*/#define EP2_IN_Callback NOP_Process#define EP3_IN_Callback NOP_Process#define EP4_IN_Callback NOP_Process #defineEP5_IN...
Wide bandgap semiconductor materials represented by silicon carbide and gallium nitride have the characteristics of high thermal conductivity, high breakdown field strength, high saturated electron dr...
There is an error when the out terminals of multiple FPGA components are connected to the same I/O port. Is this not possible? In fact, the out output timings of those components are different, so the...
I used directshow to write an MP3 player software and it is now playing normally. However, I tried to set the channel. I used IBASICAUDIO's PUT_BLANCE to set it, but it seems that it was only set in t...
To measure the settlement of a building, 17 monitoring points are set up on the building, and the settlement of each monitoring point is displayed by computer at the on-site monitoring center.Now we n...
[size=4]As the title says, [/size][size=4][size=4][size=4]STM32L1[/size] can enter and wake up normally. The current consumption is about 16mA in normal mode and about 300uA in stop mode. Timers, RTC,...
Today's portable medical devices allow patients to diagnose and treat themselves, move around freely, and even use the devices when they are out and about. To achieve the "easy to carry" feature, po...[Details]
Embedded systems are the replacement products of computer technology, communication technology, semiconductor technology, microelectronics technology, voice and image data transmission technology, and...[Details]
Abstract: Based on the research of the communication process between the reader and the RFID tag, combined with the EPC C1G2 protocol and ISO/IEC18000.6 protocol, a digital circuit of RFID tag appl...[Details]
In electronic measurement technology, frequency measurement is one of the most basic measurements. The commonly used frequency measurement method and period measurement method have great limitation...[Details]
introduction
Taking care of babies is very tiring because they wake up and sleep frequently, and activities such as feeding and changing clothes will take up a lot of adults' time and energy. ...[Details]
Power semiconductors and reactive components (capacitors and inductors) are ubiquitous in today's electrical equipment. In normal operation, they can cause two undesirable side effects on the AC line ...[Details]
Global IP Solutions (GIPS), a leading provider of high-quality IP multimedia processing solutions, announced that GIPS has enabled Voice over Internet Protocol (VoIP) capabilities for Apple's iPhon...[Details]
1. Basic circuit characteristics of power amplifier
The basic circuit of the complementary symmetrical OTL power amplifier is shown in Figure ①. Among them: C1 is the signal input coupling ele...[Details]
1 Introduction
Intelligent software agents are software programs that can perform specific tasks for users, have a certain degree of intelligence, can autonomously perform some tasks, and ...[Details]
introduction
Traditional electric actuators are easy to use and save investment, and have been widely used in production process control systems in the fields of electricity, metallurgy, petro...[Details]
Abstract:
Under high dynamic conditions, combined with GEC's twelve-channel correlator GP2021, this paper discusses the structural design of GPS receivers and the key technologies inv...[Details]
0 Introduction
At present, most of the automatic blood pressure monitoring systems used in hospitals are imported equipment, which are expensive and increase the cost of medical treatment. The...[Details]
Abstract: In many SCART applications, due to the complex signal switching requirements, dedicated ICs are usually used to implement SCART connections. This will bring cost pressure to single SCART ...[Details]
Abstract: This paper analyzes the technical characteristics of mobile streaming media and the core technical protocol of mobile streaming media - H.264 protocol, and explains the two major domesti...[Details]
With the development of LED technology, the application of LED has expanded from the traditional low-power portable product backlight to medium- and high-power indoor lighting, outdoor lighting, an...[Details]