Pl tronics, Inc.
.
19013 36th Ave. W, Suite H Lynnwood, WA 98036 USA
Manufacturer of High Quality Frequency Control Products
TV5 TCVCXO Series
Surface Mount Temp. Compensated Voltage Controlled Xtal Oscillator with or without Trimmer
Clipped Sine Wave Compatible
Standard Specifications
Operating Temperature Range
vs. Temp
Overall Frequency
vs. Vcc
Stability
Aging
Frequency Adj by Trimmer
Supply Voltage (Vcc)
Output Voltage Levels
Supply Current (Icc)
Output Load (see Test Circuit 7)
Control Voltage Range (CVR)
Pullablity over CVR
Linearity
10.00 MHz
–
60.00 MHz
0 to +50°C to -40 to +85°C available
± 1.5 to ± 15 PPM over Operating Temperature Range available
± 0.5 PPM maximum over Vcc ± 5%
± 3 PPM first year, ± 1 PPM per year thereafter at 25°C ± 5%
± 3 PPM minimum
5.0 volts and 3.3 volts available
1 volt p-p minimum
2 to 5 mA max
10 K / 10 pF
0.5 to 4.5 volts for 5.0 volt Supply; 0.0 to 3.3 volts for 3.3 volt Supply
± 5, 10, 15 PPM. Consult factory for ± 25 PPM.
± 10% (Consult factory for ± 5%)
Part Numbering Guide
Portions of the part number that appear after the frequency may not be marked on part (C of C provided)
Consult factory for
3TV5 1 C 100 A S - 10.0M - XXX
(Internal Code or blank)
available frequencies
Model / Supply Voltage
Frequency in MHz
and specs. Not all
TV5= 5.0 volts ±5%
options available
Frequency Deviation (Pullability) over CVR
3TV5= 3.3 volts ±5%
for all frequencies.
S: ± 5 PPM
Q: ± 15 PPM
A special p/n may
R: ± 10 PPM
T: ± 25 PPM
TCVCXO Package
be assigned.
Frequency Stability
is inclusive of
frequency shifts due
to calibration,
temperature, supply
voltage, shock,
vibration and load
1=11.4x9.6x2mm, w/o trimmer
8=11.4x9.6x2mm, with trimmer
9=9x7x2mm, w/o trimmer
Logic
C: Clipped Sine Wave
not to scale
Mechanical: inches (mm)
.449 (11.4)
Operating Temperature Range {Tightest FS available}
A: 0 to +50
°
C {±1.5 PPM }
D: -20 to +75
°
C {± 2.0 PPM }
B: 0 to +70
°
C {±1.5 PPM }
E: -30 to +75
°
C {± 2.5 PPM }
C: -10 to +70
°
C {± 2.0 PPM } F: -40 to +85
°
C {± 5.0 PPM }
Frequency Stability (FS)
015: ± 1.5 PPM 030: ± 3.0 PPM
150: ± 15.0 PPM
020: ± 2.0 PPM 050: ± 5.0 PPM
025: ± 2.5 PPM 100: ± 10.0 PPM
Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code.
Trimmer on Package 8 only, location may vary
.354 (9.0)
Package 1 & 8
.378 (9.6)
Package 9
.276 (7.0)
Packaging
Bulk or
24mm tape
12mm pitch
Solder Pads
.079 (2.0)
.260 (6.6)
Packaging
Bulk or
16mm tape
12mm pitch
.079 (2.0)
.270 (6.86)
1
Vcon
Vcc
4
2
GND
OUT
3
4
3
For Best Performance,
Do NOT allow any traces other
than ground under oscillators
Vcon GND
(Even in buried layers)
1
2
3
OUT
.17 (4.3)
Solder Pads
.13 (3.3)
4
3
1
2
.06 (1.6)
4
Vcc
1
.07 (1.8)
2
.06 (1.6)
.300 (7.62)
.04 (1.0)
.200 (5.08)
Jan 2004
Pl tronics, Inc.
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com
29
京公网安备 11010802033920号
EEWORLD
