COMMERCIAL GRADE PUSHBUTTONS
MOMENTARY ACTION, SEALED, SNAP-ACTION, DOUBLE BREAK
COMMERCIAL
PUSHBUTTONS
P3
Makes and breaks every time! Less than 25mΩ contact
resistance because the OTTO design features inherent rocking
action that breaks welds and wipes contacts clean.
The P3 is the commercial version of the P1 Pushbutton switch,
offering vastly improved life under extreme conditions found in
some industrial environments. The pushbutton is sealed by a
silicone boot operating on our patented “rolling sleeve,” providing
longer life and smoother operation over a wide temperature
range. Epoxy protects the contacts and terminals from hostile
environments and solder flux.
High contact force (120g/4.2 oz), low contact resistance
(25mΩ max) and short contact bounce are the result of our snap-
action mechanism. These characteristics provide exceptional
current carrying capabilities over the life of the switch. With the
optional low level (gold plate) configuration, the P3 is well suited
to interface directly to computers and other solid state devices.
Watertight sealing is available by simply adding “W” to your
part number. Because the P3 is a double break switch, wide
connection possibilities, longer life and greater capacity are
offered. The P3 design provides a unique terminal connection
to the moving element for added flexibility. Special versions can
be provided with five terminals to control up to four circuits.
Style P3-8
Style P3-3
Style P3-3 with
Push-Pull Action
Style P3-6
Style P3-7
®
C
US
Standard Characteristics/Ratings:
ELECTRICAL RATINGS:
Load
Resistive
Inductive
Lamp
Center Contact
DWV
Low Level
Electrical Life:
Mechanical Life:
Seal:
Shock:
Operating Force:
Reset Force:
Total Travel:
Overtravel:
Sea Level @ 28VDC
or 115VAC, 60/400Hz
10A
5A
3A
3A max
1050Vrms
See Rating Chart
1 million cycles, circuit forms 1, 2 & 6
100,000 cycles, circuit forms 3, 4 & 5
IP64 or IP68S
MIL-STD-202, method 207
2.5 lbs. or 4.0 lbs.
High Force Push Pull: 4.0 lbs. min.
0.75 lb. min or 1.0 lb.
0.085 +/- 0.015 inches
0.012 inches min
50,000 feet @ 28VDC
or 115VAC, 60/400Hz
N/A
5A
N/A
N/A
400Vrms
Cycles
100,000
100,000
100,000
100,000
Features:
•
•
•
•
•
•
•
•
•
•
Button sealed with patented “rolling sleeve” principle
Contact area sealed at button & terminals
Less than 25mΩ contact resistance
Positive tactile feedback
Variety of mounting styles
Engraved buttons & bezels available
UL recognized & CSA certified
1 million mechanical cycle life
Watertight to IP68S available
RoHS/WEEE/Reach compliant
10mA @ 30mV max DC or peak AC
Operating Temp Range:
-55°C to +85°C
Movement Differential:
0.015 inches min
P3
–
X
P3 PART NUMBER CODE
X
X
X
MATERIALS:
Case:
Anodized aluminum alloy
Thermoplastic
Brass with silver, gold for low level
Screws, lockwasher and terminal lug for screw terminal option
Hex nut, lockwasher and panel seal when applicable
X
*
Button:
Terminals:
Terminal Hardware:
Case Style
1.
Style 1
3.
Style 3
6.
Style 6
7.
Style 7
8.
Style 8
Terminal
Style/Rating
1.
Solder/Std.
2.
Screw/Std.
3.
Solder/Low Level
4.
Screw/Low Level
Circuit
Form
1.
N.O.
2.
N.C.
3.
N.C. 3 Terminal
4.
N.O. 3 Terminal
5.
5 Terminal
6.
2 Circuit
Operating
Force/Action
1.
2.5 lbs./Momentary
2.
4.0 lbs./Momentary
3.
Push-Pull
4.
Push-Pull
High Force**
Button
Color
1.
Red
2.
Black
3.
Orange
4.
Yellow
5.
Green
6.
Blue
7.
Purple
8.
Gray
9.
White
Mounting Hardware:
PUSHBUTTONS
ORDERING INFORMATION:
Select the OTTO P3 switch to match your application requirements.
Combinations of features are almost unlimited.
Example:
P3-31111 is style 3 case, solder terminals, standard contact
rating, SPST-N.O. contact configuration, 2.5 lbs. operating force, red
button. For low level switching capability, specify P3-33111.
www.ottoexcellence.com
119
* Add “W” suffix for watertight to IP68S.
** Available in Case Style 3 only.
Specifications Subject To Change Without Notice
Test/Measurement
京公网安备 11010802033920号
EEWORLD
