500T010, 500S010, 500E010, 500D010
Top, Side, 45°, and 90° Entry
EMI/RFI Micro-D Banding Backshell
Round Cable Entry
Glenair’s Most Popular Micro-D Backshell
is
stocked in all sizes. Choose straight, side or 45°
cable entry.
Rugged One-Piece Aluminum shell
with
stainless steel hardware, available in standard
nickel plating, or choose optional finishes.
17-7PH Stainless Steel Clips
attach the backshell
to the connector. These backshells accept
standard and micro Band-Master ATS® shield
termination straps.
How To Order EMI/RFI Backshells
Sample Part Number
Series
M
Micro-D Backshells
Shell Finish
Shell Size
Hardware Option
Cable Entry Code
Qwik-Ty Option
Band-Master ATS®
EMI Band Strap Option
500T010
M
25
H
08
S
500S010
- Side Entry
500T010
- Top Entry
500E010
- 45° Entry
500D010
- Dual 45°
(See Table III)
A
- Cadmium Plate/Bright Dip
N
- Cadmium Plate/Olive Drab; Over Nickel
B
- Cadmium Plate/Olive Drab
NF
- Cad/O. D. Over Electroless; Nickel
B1
- Cad Plate/Olive Drab, Type II Class 1
(1000 Hour Salt Spray)
J
- Gold Iridite Over Cad; Plate Over Nickel
T
- Cadmium Plate/Bright Dip Over Nickel
M
- Electroless Nickel
Z2
- Gold Plate
Z1
- Passivate, Stainless;Steel Material
09, 15, 21, 25, 31, 37, 51, 51-2, 67, 69, 100
(See Table III)
EJ
- (2) Male Extended (Style T and S Only)
B
- (2) Fillister Head Jackscrew
BJ
- (2) Male Fillister Head
F
- (2) Jackpost, Female
H
- (2) Hex Head Jackscrew
FB
- (1) Female Jackpost, (1) Male Filister Head
HJ
- (2) Male Hex
FH
- (1) Female Jackpost, (1) Male Hex Socket
E
– (2) Extended Jackscrew
N
- No Hardware
05
- .156 (4.0)
06
- .188 (4.8)
07
- .219 (5.6)
08
- .250 (6.4)
04
- .125 (3.2)
09
- .281 (7.1)
10
- .312 (7.9)
11
- .344 (8.7)
12
- .375 (9.5)
(See Table I)
S
- with Qwik-Ty strain relief
Omit
for none
Omit
(Leave Blank) - Band Not Included
Standard Band
- .250" Wide
K
- Coiled Band Included
Use the following codes to order band strap with
B
- Uncoiled Band Included
the connector. For best availability, order band
Micro Band
-
.125" Wide
separately.
M
- Uncoiled Band Included
L
- Coiled Band Included
Table I: Maximum Cable Entry
Code
Shell
Size
9
15
21
25
31
37
51
51-2
67
69
75
100
130
Style E
&T
08
08
08
08
09
09
10
09
09
10
10
12
12
Style D
06
08
08
08
09
09
10
09
09
10
10
12
12
Style S
09
10
10
12
12
12
12
12
12
12
12
12
12
Table II: Maximum Cable Entry
Dimensions
Cable
Size
04
05
06
07
08
09
10
11
12
P ±.015
In. ± mm. ±
.015
0.38
.125
3.2
.156
.188
.219
.250
.281
.312
.344
.375
4.0
4.8
5.6
6.4
7.1
7.9
8.7
9.5
R Dia. Max
In.
.296
.327
.359
.390
.421
.452
.484
.515
.546
mm.
7.5
8.3
9.1
9.9
10.7
11.5
12.3
13.1
13.7
Notes
1.
2.
3.
4.
Assembly identified with manufacturer's name and P/N
51-2 shell size is for a special 51 position 2 row Micro D
connector
Knurled or ribbed banding platform - manufacturer's
option
EMI gasket mounts between mating connector and panel
Materials/Finish
• Shell: Aluminum Alloy 6061 -T6 Per QQ-A-200, QQ-A-225
(Machined Components)
Aluminum Alloy 6061-T6 Per QQ-A-591 (A380) (Die-Cast
Components)
• Clips, E-Rings: 17-7PH Stainless Steel
• Jackscrews, Washers, Jackposts: 300 Series Stainless Steel,
Passivated
© 2014 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Rev 3.16.18
Printed in U.S.A.
GLENAIR, INC.
•
1211 AIR WAY
•
GLENDALE, CA 91201-2497
•
818-247-6000
•
FAX 818-500-9912
www.glenair.com
M-6
E-Mail: sales@glenair.com
Rev. 03.10.21
Round Cable Entry
Style T - Top Entry
E
R
Max Typ
.06(1.5)
.44(11.2)
Table III: Dimensions
Available for Style T and S Only
Code B
P Typ
.04 Min
L
Configuration
Mfr Option
Code BJ
D
F .175
(4.4)
Code EJ
Extended Jackscrew
H
Connector Shown
For Reference Only
Code E
Floating Extended Jackscrew
H
Code F
Female Jackpost
Style E - 45° Entry
Style S - Side Entry
M
N
.390
(9.9)
.188(4.8)
Code HJ
Hex Socket Jackscrew
Code H
Extended Jackscrew
G
K
Configuration
Mfr Option
Style D - 45° Dual Entry
EMI Gasket Option (559-005)
See Note 4
C
Optional
Configuration
See Note 3
B
A
M
N
Code S
Qwik-Ty
M
In.
.565
.715
.865
.965
1.115
1.265
1.215
1.615
2.015
1.515
1.705
1.800
2.160
C
mm.
14.35
18.16
21.97
24.51
28.32
32.13
30.86
41.02
51.18
38.48
43.31
45.72
54.86
D Max.
In. mm.
.780 19.81
.910 23.11
1.030 26.16
1.090 27.69
1.150 29.21
1.190 30.23
1.220 30.99
1.220 30.99
1.220 30.99
1.220 30.99
1.220 30.99
1.280 32.51
1.280 32.51
E Max.
In. mm.
.410 10.41
.580 14.73
.740 18.80
.850 21.59
.980 24.89
1.130 28.70
1.080 27.43
1.510 38.35
1.880 47.75
1.380 35.05
1.375 34.93
1.470 37.34
1.830 46.48
F Max
In. mm.
.350 8.89
.470 11.94
.590 14.99
.650 16.51
.710 18.03
.750 19.05
.780 19.81
.780 19.81
.780 19.81
.780 19.81
.780 19.81
.840 21.34
.840 21.34
G Max
In. mm.
.637 16.18
673 17.09
.707 17.95
.748 19.00
.756 19.20
.774 19.66
.859 21.82
.859 21.82
.859 21.82
.859 21.82
.859 21.82
1.014 25.76
1.014 25.76
H Ref
In. mm.
.154 3.9
.154 3.9
.154 3.9
.154 3.9
.154 3.9
.154 3.9
.154 3.9
.154 3.9
.154 3.9
.154 3.9
.184 4.7
.184 4.7
.184 4.7
J Thread
2-56 UNC-2
2-56 UNC-2
2-56 UNC-2
2-56 UNC-2
2-56 UNC-2
2-56 UNC-2
2-56 UNC-2
2-56 UNC-2
2-56 UNC-2
2-56 UNC-2
4-40 UNC-2
4-40 UNC-2
4-40 UNC-2
In.
.435
.440
.458
.483
.476
.478
.548
.548
.548
.548
.548
.687
.687
K
mm.
11.05
11.2
11.63
12.27
12.09
12.14
13.91
13.91
13.91
13.91
13.91
17.45
17.45
L Max.
In. mm.
1.040 26.42
1.170 29.72
1.290 32.77
1.350 34.29
1.420 36.07
1.450 36.83
1.480 37.59
1.480 37.59
1.480 37.59
1.480 37.59
1.480 37.59
1.580 40.13
1.580 40.13
M Max.
In. mm.
1.000 25.40
1.030 26.16
1.050 26.67
1.090 27.69
1.130 28.70
1.230 31.24
1.250 31.75
1.250 31.75
1.250 31.75
1.250 31.75
1.250 31.75
1.320 33.53
1.320 33.53
N Max.
In. mm.
.680 17.27
.730 18.54
.765 19.43
.830 21.08
.890 22.61
.955 24.26
1.005 25.53
1.005 25.53
1.005 25.53
1.005 25.53
1.005 25.53
1.080 27.43
1.080 27.43
Size
09
15
21
25
31
37
51
51-2
67
69
75
100
130
A Max.
In. mm.
.850 21.59
1.000 25.40
1.150 29.21
1.250 31.75
1.400 35.56
1.550 39.37
1.500 38.10
1.910 48.51
2.310 58.67
1.810 45.97
2.140 54.36
2.235 56.77
2.595 65.92
B Max.
In. mm.
.370 9.40
.370 9.40
.370 9.40
.370 9.40
.370 9.40
.370 9.40
.410 10.41
.370 9.40
.370 9.40
.410 10.41
.410 10.41
.460 11.68
.490 11.68
© 2014 Glenair, Inc.
High Performance Micro-D Connectors and Cables
U.S. CAGE Code 06324
Rev 3.16.18
Printed in U.S.A.
GLENAIR, INC.
•
1211 AIR WAY
•
GLENDALE, CA 91201-2497
•
818-247-6000
•
FAX 818-500-9912
www.glenair.com
M-7
E-Mail: sales@glenair.com
Rev. 03.10.21
Micro-D Backshells
500T010, 500S010, 500E010, 500D010
Top, Side, 45°, and 90° Entry
EMI/RFI Micro-D Banding Backshell
How
to Order
GLENAIR
SYMBOL
A
B
C*
G*
J
LF
M
N
NC
NF
T
U
ZU**
ZN
*
**
W
N
A
M85049 SYMBOL
REFERENCE ONLY
FINISH
Cadmium Plate, Bright
Anodize, Black
Hard Coat, Anodic
Electroless Nickel
Cadmium Plate, Black
Cadmium Plate, Black
Anti-friction and thrust washers
Anti-rotation device
Reference Information
Standard Materials and Finishes
TABLE II - STANDARD FINISHES
SPECIFICATION(S)
AMS-QQ-P-416, Type I, Class 2
AMS-QQ-P-416, Type II, Class 3
AMS-A-8625, Type II, Class 2
AMS-A-8625, Type III, Class 1
Cadmium Plate, Olive Drab
Iridite, Gold Over Cadmium Plate Over MIL-C-5541, Class 3 AMS-QQ-P-416, Type II,
Electroless Nickel
Class 3 over AMS-C-26074, Class 4, Grade B
Cadmium Plate, Bright Over
Electroless Nickel
Cadmium Plate, Olive Drab Over
Electroless Nickel
Zinc Cobalt, Dark Olive Drab
Cadmium Plate, Olive Drab Over
Electroless Nickel
Cadmium Plate, Bright Over
Electroless Nickel
1000 Hour Corrosion Resistance
AMS-C-26074, Class 4, Grade B
AMS-QQ-P-416, Type II, Class 3 over Electroless Nickel
AMS-C-26074
96 Hour Corrosion Resistance
1000 Hour Corrosion Resistance
AMS-QQ-P-416, Type I, Class 3
ASTMB 733-90, SC2, Type I, Class 5, MIL-C-26074***
AMS-QQ-P-416, Type II, Class 3
AMS-QQ-P-416, Type II, Class 3
ASTMB 841-91, Over Electroless Nickel 1000 Hour Salt
Spray
Zinc-Nickel Alloy, Olive Drab
Anodize finish; not suitable for EMI Shielding or grounding applications.
Applicable to corrosion resisting steel backshells and accessories. Consult factory for other available finishes.
The following standard materials are used for the majority of Glenair
backshells and connector accessories. However, backshell compo-
nents are not limited to those items listed, but are representative of
the elements used in Glenair's general accessory products. Contact
Glenair for applicable specifications on items not listed below.
COMPONENT
Machined components: such as backshell bodies, fabricated elbows, protective covers,
rotatable couplers, dummy stowage receptacles, lock nuts, G-spring support rings,
EMI ground rings, grommet followers, etc.
Die cast components: such as angular backshells, strain relief backshells, strain relief
bodies, strain relief saddles, special EMI ground rings, etc.
Backshells or strain reliefs: available in optional corrosion resisting steel; and
hardware: such as screws, washers, rivets, wire rope, sash chain, band straps, etc.
Elastomeric seals: such as O-rings, cable jacket seals, grommets, etc.
STANDARD MATERIALS - BACKSHELLS AND ACCESSORIES
MATERIAL
Aluminum
Aluminum
SPECIFICATION
AMS-QQ-A-200
ASTMB221, 209
QQ-A-591
ASTMB85, 26
Corrosion Resisting Steel ASTMA582 (300 Series)
AMS-QQ-S-763
Silicone
A-A-59588
Fluorosilicone
MIL-DTL-25988
Fluoropolymer
TFE
Corrosion Resistant
N/A
Material
BODY STRAP
Glenair offers an optional stainless steel body strap for
attaching protective covers as illustrated. To specify body
strap, add suffix letter C to the end of the part number. For
example 360AS001M1610M6C.
NOTES
On all length callouts, tolerance is ± .060 unless otherwise
specified.
Unless otherwise specified, the following other dimensional
tolerances will apply:
.xx = ± .03 (0.8)
.xxx = ± .015 (0.4)
Lengths = ± .060 (1.52)
Angles = ± 5°
Metric dimensions (mm) are indicated in parentheses
2-56 Screw and Nut
NOTE: For your convenience these tables have been reproduced inside the back cover fold-out.
© 2005 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC.
•
1211 AIR WAY
•
GLENDALE, CA 91201-2497
•
818-247-6000
•
FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
14
Glenair Backshell and Accessory Material and Finish Options
Backshell and accessory base materials, plating options, specifications and codes
Code
A
AB
AL
B
C
E
G
J
JF
LF
M
MT
N
NC
NF
P
T
TP2
U
UC
UCR
UF
XAL
XB
XM
XMT
XO
XW
XZN
Z1
Z2
ZC
ZCR
ZL
ZM
ZMT
ZN
ZNU
ZR
ZU
ZW
Material
Aluminum
Marine Bronze
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Stainless Steel
Aluminum
Titanium
Aluminum
Aluminum
Aluminum
Aluminum
Composite
Composite
Composite
Composite
Composite
Composite
Composite
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Aluminum
Aluminum
Aluminum
Stainless Steel
Stainless Steel
Finish
Cadmium, No Chromate
Unplated
AlumiPlate, Clear Chromate
Cadmium, Olive Drab
Anodize, Black
Chem Film
Anodize, Hardcoat
Cadmium, Gold
Cadmium, Gold
Cadmium, Clear
Electroless Nickel
Nickel-PTFE
Cadmium, Olive Drab
Zinc-Cobalt, Olive Drab
Cadmium, Olive Drab
Electrodeposited Nickel
Cadmium, No Chromate
Electrodeposited Nickel
Cadmium, Black
Zinc-Cobalt, Black
Zinc-Cobalt, Black
Cadmium, Black
AlumiPlate
Unplated Black
Electroless Nickel
Nickel-PTFE
Unplated Light Brown
Cadmium, Olive Drab
Zinc-Nickel, Black
Passivate
Gold
Zinc-Cobalt, Black
Zinc-Cobalt, Black
Electrodeposited Nickel
Electroless Nickel
Nickel-PTFE
Zinc-Nickel, Olive Drab
Zinc-Nickel, Black
Zinc-Nickel, Black
Cadmium, Black
Cadmium, Olive Drab
Finish Specification
SAE-AMS-QQ-P-416 Type I Class 3
MIL-DTL-83488, Class 2, Type II over electroless nickel
SAE-AMS-QQ-P-416 Type II Class 3
AMS-A-8625 Type II Class 2
MIL-DTL-5541 Type 1 Class 3
AMS-A-8625 Type III, Class 1, .001" thick
SAE-AMS-QQ-P-416 Type II, Class 2 over electroless nickel
SAE-AMS-QQ-P-416 Type II, Class 2 over electroless nickel
SAE-AMS-QQ-P-416 Type II Class 2 over electroless nickel
AMS-C-26074 Class 4 Grade B; ASTM-B-733, SC 2, Type IV
SAE AMS2454
SAE-AMS-QQ-P-416 Type II Class 3 over electroless nickel
ASTM B 840 Grade 6 Type D over electroless nickel
SAE-AMS-QQ-P-416 Type II Class 2 over electroless nickel
SAE-AMS-QQ-N-290 Class 1 Grade F
SAE-AMS-QQ-P-416 Type I Class 3 over electroless nickel
SAE-AMS-QQ-N-290 Class 1 Grade F
SAE-AMS-QQ-P-416 Type I Class 3
ASTM B 840 Grade 6 Type D over electroless nickel
ASTM B 840 Grade 6 Type D over electroless nickel
SAE-AMS-QQ-P-416 Type II Class 2 over electroless nickel
MIL-DTL-86448, Class 2, Type II over electroless nickel
AMS-C-26074
GMS-002 Class 2 Type II
SAE-AMS-QQ-P-416 Type II Class 3 over electroless nickel
ASTM B841 Grade 5 over electroless nickel
SAE-AMS-SAE-AMS-QQ-P-35 Type VI
MIL-DTL-45204 Class 1 over electroless nickel
ASTM-B840, Grade 6
ASTM-B840, Grade 6
SAE-AMS-QQ-N-290 Class 1 Grade F
AMS-C-26074 Class 1 Grade A
SAE AMS2454
ASTM B841 Grade 5 over electroless nickel
ASTM B841 Grade 5 over electroless nickel
ASTM B841 Grade 5 over electroless nickel
SAE-AMS-QQ-P-416 Type II Class 3
SAE-AMS-QQ-P-416 Type II Class 2 over electroless nickel
Hrs. Salt Spray Electrical
(static)
Conductivity
48
1000
1000
96
336
168
336
500
1000
1000
48
1000
500
350
1000
500
96
96
96
350
350
1000
2000
2000
2000
2000
2000
2000
2000
1000
48
500
500
1000
1000
1000
1000
1000
1000
1000
2000
Conductive
Conductive
Conductive
Conductive
Non-Conductive
Conductive
Non-Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Non-Conductive
Conductive
Conductive
Non-Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Rev. 11.29.17
Operating Temp.
Range
-65 to +175°C
-65 to +200°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +200°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +200°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +200°C
-65 to +175°C
-65 to +200°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +200°C
-65 to +200°C
-65 to +175°C
-65 to +175°C
-65 to +200°C
-65 to +200°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
Notes
Not recommended for new projects. LF is preferred.
Marine and geophysical applications.
Approved for MIL-DTL-38999L and MIL-DTL-83513G.
Not recommended for new projects. NF is preferred.
Glenair’s standard black anodize finish.
Glenair’s standard chem film finish.
Glenair’s preferred hardcoat finish.
Not recommended for new projects. JF is preferred.
Glenair’s preferred gold cadmium finish.
Glenair’s preferred clear cadmium finish.
Glenair’s standard electroless nickel finish.
Approved for MIL-DTL-38999L and MIL-DTL-83513G.
Not recommended for new projects. NF is preferred.
Glenair’s standard olive drab zinc-cobalt finish.
Glenair’s standard olive drab cadmium finish.
Use ZM for electroless nickel alternative.
Not recommended for new projects. LF is preferred.
Glenair’s preferred finish for titanium connectors.
Not recommended for new projects. UF is preferred.
Glenair’s standard black zinc-cobalt finish.
RoHS version of UC.
Glenair’s preferred black cadmium finish.
Approved for MIL-DTL-38999L.
Glenair’s standard unplated composite.
Glenair’s standard electroless nickel finish over composite.
Approved for MIL-DTL-38999L.
Not recommended for new projects. Use XB.
Glenair’s standard olive drab cadmium finish over composite.
Glenair’s standard black zinc-nickel finish over composite.
Glenair’s standard passivated stainless steel.
Glenair’s standard gold plating for space programs.
Glenair’s standard zinc-cobalt over stainless steel.
RoHS version of ZC.
Used on hermetic connectors. Use ZM for other applications.
Glenair’s preferred nickel-plated stainless steel.
Glenair’s new 1000 Hour Grey over stainless steel.
Glenair’s standard olive drab zinc-nickel finish.
Glenair’s standard black zinc-nickel finish.
Glenair’s RoHs compliant black zinc-nickel.
Glenair’s standard black cadmium over stainless steel.
Glenair’s standard olive drab cadmium over stainless steel.
© 2017 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
© 2017 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324
Robotics Development
京公网安备 11010802033920号
EEWORLD
