Operating/Storage: 35% to 95% (with no condensation)
±10%
max. of sensing distance at 23°C in the temperature range of
−25
to 70°C
±2.5%
max. of sensing distance at rated voltage in the rated voltage
±15%
range
50 MΩ min. (at 500 VDC) between current-carrying parts and case
1,000 VAC for 1 min between current-carrying parts and case
Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Destruction: 500 m/s
2
3 times each in X, Y, and Z directions
IEC 60529 IP67, in-house standards: oil-resistant
*2
Pre-wired Models (Standard cable length: 2 m)
Approx. 45 g
Heat-resistant ABS
Instruction manual
*1. The response frequency is an average value.
Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.
*2. For environments that require oil resistance, the upper limit of the ambient operating temperature range is 40°C.
2
TL-W
DC 3-Wire Models
Model
Item
Sensing distance
Set distance
Differential travel
Detectable object
Standard sensing
object
Response
frequency
TL-W1R5MC1
1.5 mm
±10%
0 to 1.2 mm
TL-W3MC@
3 mm
±10%
0 to 2.4 mm
TL-W5MC@
5 mm
±10%
0 to 4 mm
TL-W5E1, TL-W5E2
TL-W5F1, TL-W5F2
TL-W20ME1
TL-W20ME2
20 mm
±10%
0 to 16 mm
1% to 15% of
sensing distance
Iron, 50
×
50
×
1 mm
300 Hz min.
12 to 24 VDC (10 to 30 VDC),
ripple (p-p): 20% max.
15 mA max. at 24 VDC (no-load)
40 Hz min.
12 to 24 VDC (10
to 30 VDC), ripple
(p-p): 10% max.
8 mA at 12 VDC,
15 mA at 24 VDC
100 mA max. at
12 VDC
200 mA max. at
24 VDC
10% max. of sensing distance
Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to
Engineering Data
on page 5.)
Iron, 8
×
8
×
1 mm
1 kHz min.
Iron, 12
×
12
×
1 mm Iron, 18
×
18
×
1 mm
600 Hz min.
500 Hz min.
Power supply volt-
age (operating volt-
12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
age range)
Current
consumption
15 mA max. at 24 VDC (no-load)
10 mA max.
NPN open collector
50 mA max. at
12 VDC (30 VDC
max.)
100 mA max. at
24 VDC (30 VDC
max.)
Load
current
Control
output
NPN open collector
100 mA max. at 30 VDC max.
200 mA
Residual
1 V max. (under load current of 100 mA with
voltage
cable length of 2 m)
Indicators
Operation mode
(with sensing ob-
ject approaching)
Protection circuits
Ambient
temperature range
Ambient
humidity range
Temperature
influence
Voltage influence
Insulation
resistance
Dielectric strength
Vibration
resistance
Detection indicator (red)
NO
C1 Models: NO
C2/B2 Models: NC
1 V max. (under
1 V max. (under load
2 V max. (under load current of load current of
current of 50 mA with
200 mA with cable length of 2 m) 200 mA with ca-
cable length of 2 m)
ble length of 2 m)
E1/F1 Models: NO
E2/F2 Models: NC
Refer to the timing charts under
I/O Circuit Diagrams
on page 6 for details.
Reverse polarity protection, Surge suppressor
Operating/Storage:
−25
to 70°C (with no icing or condensation)
*
Operating/Storage: 35% to 95% (with no condensation)
±10%
max. of sensing distance at 23°C in the temperature range of
−25
to 70°C
±2.5%
max. of sens-
±2.5%
max. of sensing distance at rated volt- ing distance at rated
age in the rated voltage
±10%
range
voltage in the rated
voltage
±20%
range
50 MΩ min. (at 500 VDC) between current-carrying parts and case
1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Destruction:
500 m/s
2
10
times each in X,
Y, and Z direc-
tions
±2.5%
max. of sensing distance at rated voltage in
the rated voltage
±10%
range
Shock resistance
Destruction: 500 m/s
2
3 times each in X, Y, and Z directions
Degree of
protection
Connection
method
Weight
(packed state)
Materi-
als
Case
Sensing
surface
IEC 60529 IP67, in-house standards: oil-resistant
*
Pre-wired Models (Standard cable length: 2 m)
Approx. 30 g
Heat-resistant ABS
Heat-resistant ABS
Mounting Bracket, Instruction manual
Instruction manual
Approx. 45 g
Approx. 70 g
Aluminum die-cast
Approx. 180 g
Heat-resistant
ABS
Accessories
* For environments that require oil resistance, the upper limit of the ambient operating temperature range is 40°C.
I have downloaded and installed Microsoft? Windows? CE 5.0 Device Emulator, but in the device manager of vs2005, there is only wince5 but no emulator. Why is that?...
Does anyone have experience using digital volume control ICs such as PT2313?I recently used a volume control unit in a small project. In the circuit, we chose to use the PT2313 volume optimization con...
Hello everyone, I have an image IMG file of a system running on Motorola EZ328, the system uses the PPSM system. I want to extract the corresponding application files from it and analyze them. How can...
The UDP server program does not know that after the IP address is bound to a port number, if the system IP address changes, does it need to be re-bound?...
Traditional broadcasting systems generally need to be operated manually at a fixed time, and can only realize one-way broadcasting with few functions. Traditional bell ringing equipment has a singl...[Details]
introduction
Since the beginning of the 21st century, the world of information has changed rapidly. Maybe a high-tech product will be released today and a better similar product will be releas...[Details]
1. Circuit composition
The whole circuit consists of two parts:
1. Power saving control circuit
As shown in the figure below. Including delay circuit and drive circuit.
(1) Delay ci...[Details]
1. Introduction
With the growth of parking demand, the scale of parking lots is becoming larger and larger. A lot of research has been done on intelligent parking lots in China, but most of th...[Details]
1. Introduction
This design was made for participating in an electronic design competition. It effectively solved the problem of the operation and control of an electric car on a seesaw. The s...[Details]
Remote keyless entry (RKE) systems have become popular with users, with more than 80% of new cars in North America and more than 70% in Europe equipped with RKE systems. In addition to the obvious ...[Details]
With the advent of increasingly powerful processors, image sensors, memory, and other semiconductor devices, as well as the algorithms that enable them, computer vision can be implemented in a wide...[Details]
Converged processors meet scalability requirements
In current embedded system design, solutions based on MCU, DSP, FPGA and ASIC account for more than 90% of the market share. These solutions ...[Details]
Due to the significant increase in electronic devices in automotive and industrial applications, the automotive and industrial markets continue to play an important role in China's electronics in...[Details]
1. Principle of displacement angle sensor
The angle sensor is used to detect angles. It has a hole in its body that fits the LEGO axle. When connected to the RCX, the angle sensor counts once ...[Details]
As people's requirements for safety and comfort in the process of driving cars continue to increase, automotive radars are widely used in the car's adaptive cruise system, collision avoidance syste...[Details]
Corelink Semiconductor has launched the CL1100-based 5-7W E27 LED lighting driver system solution DB2. This driver module meets the requirements of small size (L×W×H=5.1cm×2.1cm×1.8cm), low standby...[Details]
introduction
At present, measuring instruments are developing towards networking, and each individual embedded instrument will become a node on the Internet. This system realizes the network...[Details]
introduction
LEDs continue to gain popularity in automotive applications, thanks to their long lifespan and the flexibility they offer for body styling and interior design. Some may be surpris...[Details]
The most important components of new energy electric vehicles are power batteries, electric motors and energy conversion control systems. The power battery must achieve high performance such as fas...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
