SPECIFICATION CONTROL DRAWING
TITLE
55/4322
Date
TWO CONDUCTOR CABLE, JACKETED, OUTER SPACE, 600 VOLT
This specification sheet forms a part of the latest issue of Raychem Specification 55/.
COMPONENT WIRES - 55/0312
3-21-12
Revision
C
JACKET - LOW OUTGASSING,
RADIATION-CROSSLINKED,
MODIFIED ETFE
CABLE CONSTRUCTION DETAILS
PART NUMBER
1/
55/4322-26-*
55/4322-24-*
55/4322-22-*
55/4322-20-*
55/4322-18-*
55/4322-16-*
55/4322-14-*
55/4322-12-*
55/4322-10-*
CONDUCTOR
SIZE
(AWG)
26
24
22
20
18
16
14
12
10
JACKET THICKNESS
(in.)
MINIMUM
.0040
.0040
.0040
.0040
.0045
.0045
.0050
.0050
.0060
NOMINAL
.0050
.0050
.0050
.0050
.0055
.0055
.0060
.0060
.0070
OUTSIDE DIAMETER
(in.)
NOMINAL
.064
.074
.088
.109
.129
.144
.174
.212
.266
MAXIMUM
.067
.078
.092
.113
.133
.148
.179
.218
.275
MAXIMUM
WEIGHT
(lbs/1000 ft.)
3.15
4.42
6.39
9.79
14.65
18.42
27.94
42.40
67.55
CABLE RATINGS AND ADDITIONAL REQUIREMENTS
TEMPERATURE RATING: 200°C
Maximum continuous conductor temperature
VOLTAGE RATING: 600 volts (rms) at sea level
CROSSLINKED VERIFICATION: 300 ± 3°C for 1 hour
DIELECTRIC WITHSTAND: 1500 volts (rms), 60 Hz
JACKET COLOR: White preferred
JACKET ELONGATION: 50% (minimum)
RADIATION RESISTANCE: 500 megarads
VACUUM STABILITY:
Total Mass Loss (TML), 1.00% (maximum)
Volatile Condensable Material (VCM), 0.10% (maximum)
NOTE: Nominal values are for information only.
Nominal values are not requirements.
PART NUMBER:
The “*” in the part numbers above shall be replaced by color code
designators with a slash separating the component wire colors and a
dash separating the component wire colors from the jacket color.
1/
Example: AWG 22, black and brown component wires;
white jacket: 55/4322-22-0/1-9
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
1/
COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. HOWEVER, DUE TO LENGTH LIMITATIONS OF THE RAYCHEM PART NUMBER,
AN ALTERNATIVE COLOR CODE MAY REPLACE MIL-STD-681 COLOR CODE DESIGNATORS. (EXAMPLE: “901/902...” MAY BE REPLACED BY “Axxx”.) OTHER CODES AND
SUFFIXES MAY BE ADDED TO THE PART NUMBER AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
Raychem, TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks.
Raychem Wire & Cable
501 Oakside Avenue
Redwood City, CA 94063-3800
Phone: 1-800-227-8816
Fax: 1-650-361-6297
© 2012 Tyco Electronics Corporation. All rights reserved.
Page 1 of 1
DIMENSIONS ARE IN INCHES, AND UNLESS OTHERWISE DESIGNATED ARE NOMINAL.
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
京公网安备 11010802033920号
EEWORLD
