This specification establishes the quality standard for heat-shrinkable identification marker sleeves for use in
applications where high temperature performance or where extreme resistance to cleaning solvents is required.
They are also used in space applications where low outgassing is critical. These special requirements are
detailed in Table 5.
The operating temperature for this product is -55° to +225° (-67 to +437°
C
C
F).
This system is a computerised method of identifying items by printing a mark on HT-SCE and HT-CT product
ranges which is permanent upon printing. This system is not recommended where strain relief properties are
required.
The marker sleeves shall be fabricated from cross linked polymer tubing. Supplied flattened and spooled in a
continuous tube as HT-CT or mounted on a carrier as HT-SCE. All sizes have a 2:1 shrink ratio except size
3/32 which has a 3:1 shrink ratio (refer to Table 1 for more details).
The marker system comprises specific printers and ribbons; refer to TE Connectivity (TE) document 411-
121005 ‘TE Identification Printer Product Ribbon Matrix’. Compliance to this specification can only be
guaranteed if TE Connectivity approved printers and ribbons are used. All ribbons used must have an expiry
date which exceeds the testing period. Products printed with white or silver ribbons may not fully comply with
this specification when exposed to some aggressive fluids as detailed in
Table 4
(Page 13).
Unless specified, the tube size for qualification testing is 6.4mm.
THIS IS A CLASS 1 DOCUMENT WHICH IS NONCONFIDENTIAL.
The information contained within this document is the property of TE Connectivity. It is supplied in confidence and the
commercial security of the contents must be maintained. It must not be used for any purpose other than that for
which it is supplied nor, may any information contained in it be disclosed to unauthorised persons. It must not be
reproduced in whole or in part without obtaining written permission from TE Connectivity (TE).
While TE has made every reasonable effort to ensure the accuracy of the information in this standard, TE does not guarantee that it is error-free, nor does TE make any other
representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at
any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or
fitness for a particular purpose. The dimensions in this standard are for reference purposes only and are subject to change without notice. Specifications are subject to change without
notice. Consult TE for the latest dimensions and design specifications.
1.
REVISION HISTORY
For revision history see DM.TEC.
*Trademark. TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or company names may be trademarks of their respective owners.
Quoted from: [url=http://blog.gkong.com/blog.asp?name=blueapple]http://blog.gkong.com/blog.asp?name=blueapple[/url] Program example for reading temperature values PLC main program Network 1 // Set the...
NRF24L01 module usage
CE: module control line, when CSN is low, CE and CONFIG register jointly determine the state of NRF24L01CSN: SPI chip select lineSCK: SPI clock lineMOSI: SPI data line (host outp...
This is the case. I am playing with rc522 and now want to read the serial number of the card. However, I found that it is a pair of garbled characters when read on 1602. I think it is because the base...
Reporter Lei Yu and correspondent Gao Xiaohan Editor's note China is currently in the midst of a wave of industrialization, urbanization, and modernization. Large-scale engineering projects and scient...
Digital signal processing technology has been widely used in the fields of communication, radar, graphics and image processing. With the development of modern science and technology, especially the en...
introduction
1 The significance of using RTOS on MSP430
It is understandable that it is meaningless to use RTOS on MSP430. Because the hardware resources of MSP430 are limited (for exampl...[Details]
introduction
With the continuous optimization of surface mount technology (SMT) and the rapid development of chip component manufacturing technology, the application of chip mounters in the el...[Details]
1. Introduction
Automobile pollution is one of the most important issues that people are most concerned about and need to solve urgently. As an important method for detecting automobile exhau...[Details]
1. Introduction
Since the 1980s, with the continuous development of automotive electronic technology, there are more and more electronic control units in automobiles, such as electronic fuel i...[Details]
This paper designs a dot matrix LED text display screen that is easy to update, expandable, and low-cost. The way to reduce costs is
① Use the Bluetooth data transmission function of mobile ph...[Details]
Power management solutions for today's portable application processors are becoming increasingly integrated. Total power consumption, standby and sleep current consumption affect battery size, bill...[Details]
PV inverter manufacturer SMA has launched its first DC arc fault circuit interrupter (AFCI) PV inverter and has received UL certification.
The new SunnyBoy AFCI inverter models include 3000-US...[Details]
In recent years, with the rapid development of the information industry, dot matrix LED display screens have been widely used in various advertising and information display systems such as the fina...[Details]
Experimental tasks
A DS18B20 is used to form a temperature measurement system. The temperature measurement accuracy reaches 0.1 degrees. The temperature range is between -20 degrees and +50 de...[Details]
Today, the value of electronic components in cars accounts for 15-20% of the total vehicle. In the future, this proportion may be as high as 30-40% as more safety electronics, fuel consumption and ...[Details]
In 2012, more than half of the cars in the European, Japanese and American car markets will be equipped with color displays, navigation systems, satellite communications and other in-vehicle infota...[Details]
At present, the traffic congestion in cities is quite serious. According to relevant news reports: In China, the traffic congestion has expanded from megacities such as Beijing, Shanghai, and Guangzho...[Details]
Spatial Division Multiplexing (SDM) MIMO processing can significantly improve spectrum efficiency and thus greatly increase the capacity of wireless communication systems. Spatial Division Multip...[Details]
LED light sources have many environmental advantages, but early products still have certain technical bottlenecks in heat dissipation and high brightness design that cannot be broken through....[Details]
To understand how and why OLED power supply affects display image quality, you must first understand OLED display technology and power supply requirements. This article will explain the latest OLED...[Details]
TI Technology Forum
京公网安备 11010802033920号
EEWORLD
