NFSL036CT datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > NFSL036CT

Preview

NFSL036CT: Descriptionwarm white led; File Size472KB，14 Pages; ManufacturerNichia; Websitehttp://www.nichia.co.jp/en/about_nichia/index.html

Download Datasheet View All

NFSL036CT Overview

warm white led

Preview

Download Datasheet

View All

No. STSE-CC7029A

<Cat.No.070309>

SPECIFICATIONS FOR NICHIA CHIP TYPE

WARM WHITE

LED

MODEL :

NFSL036CT

NICHIA CORPORATION

-0-

Nichia STSE-CC7029A

<Cat.No.070309>

7.CAUTIONS

The LEDs are devices which are materialized by combining Blue LEDs and special phosphors.

Consequently, the color of the LEDs is changed a little by an operating current.

Care should be taken after due consideration when using LEDs.

(1) Moisture Proof Package

· When moisture is absorbed into the SMT package it may vaporize and expand during soldering.

There is a possibility that this can cause exfoliation of the contacts and damage the optical

characteristics of the LEDs.

For this reason, the moisture proof package is used to keep moisture

to a minimum in the package.

· The moisture proof package is made of an aluminum moisture proof bag. A package of

a moisture absorbent material (silica gel) is inserted into the aluminium moisture proof bag.

The silica gel changes its color from blue to pink as it absorbs moisture.

(2) Storage

· Storage Conditions

Before opening the package :

The LEDs should be kept at 30°C or less and 90%RH or less. The LEDs should be used within

a year.

When storing the LEDs, moisture proof packaging with absorbent material (silica gel)

is recommended.

After opening the package :

The LEDs should be kept at 30°C or less and 70%RH or less. The LEDs should be soldered

within 168 hours (7days) after opening the package.

If unused LEDs remain, they should be

stored in the moisture proof packages, such as sealed containers with packages of moisture

absorbent material (silica gel).

It is also recommended to return the LEDs to the original

moisture proof bag and to reseal the moisture proof bag again.

· If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage

time, baking treatment should be performed using the following condition.

Baking treatment : more than 24 hours at 65 ± 5°C

· Nichia LED electrodes are gold plated. The gold surface may be affected by environments which

contain corrosive substances. Please avoid conditions which may cause the LED to corrode,

tarnish or discolor. This corrosion or discoloration may cause difficulty during soldering operations.

It is recommended that the User use the LEDs as soon as possible.

· Please avoid rapid transitions in ambient temperature, especially in high humidity environments where

condensation can occur.

(3) Static Electricity

· Static electricity or surge voltage damages the LEDs.

It is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs.

· All devices, equipment and machinery must be properly grounded. It is recommended that precautions

be taken against surge voltage to the equipment that mounts the LEDs.

· When inspecting the final products in which LEDs were assembled, it is recommended to check

whether the assembled LEDs are damaged by static electricity or not.

It is easy to find

static-damaged LEDs by a light-on test or a VF test at a lower current (below 1mA is recommended).

· Damaged LEDs will show some unusual characteristics such as the forward voltage becomes lower,

or the LEDs do not light at the low current.

Criteria : (V

> 2.0V at I

=0.5mA)

-4-

Recommended Resources

Triac two-tone dimmer (1)

Single switch tube 8W fluorescent lamp ballast circuit

Tape end detection circuit

The most practical basic diagram circuit 28 - capacitive proximity switch circuit

555 long delay timer circuit (1)

5kHs photocell oscillation circuit

On-site testing of optical fiber links and location of fault points: The application of optical fiber communication technology is becoming more and more extensive, the variety of raw materials for manufacturing optical fiber is increasing, and the process technology of...; maker Test/Measurement

vxworks startup failed: VxWorks failed to start. Below are several screens of the startup. It shows muxload failed. It seems to be a network problem. I can ping it in Dos, but it fails to start. I have not been able to solve...; xuyuc Real-time operating system RTOS

Requesting information on shared wireless power transmission: RT, does anyone have information about radio energy transmission, or has worked on similar topics? Please share. I can't find any useful information on the Internet....; yelian Analog electronics

Kingsoft Antivirus is now free forever: http://www.duba.net/kav/free.shtmlHehe, it's so cool :loveliness:...; ddllxxrr Talking

When trust breaks down, society breaks down: [align=left][color=#222222][font=Arial, Verdana, sans-serif][size=12px](Written by a Taiwanese) Ten years ago, I took my three-year-old son to the United States for a trip and stayed at a relative's h...; ESD技术咨询 Talking about work

The wind blows across the sea: Do you still remember that sea? One day, we were going to the seaside with laughter, which should be a warm and romantic paradise. But in the end, we all forgot it. Time didn't take me away, or did I ...; bjbjt Talking

Shortcut: L0 L1 L2 L3 L4 L5 L6 L7 L8 L9 LA LB LC LD LE LF LG LH LI LJ LK LL LM LN LO LP LQ LR LS LT LU LV LW LX LY LZ M0 M1 M2 M3 M4 M5 M6 M7 M8 M9 MA MB MC MD ME MF MG MH MI MJ MK ML MM MN MO MP MQ MR MS MT MU MV MW MX MY MZ N0 N1 N2 N3 N4 N5 N6 N7 N8 NA NB NC ND NE NF NG NH NI NJ NK NL NM NN NO NP NQ NR NS NT NU NV NX NZ O0 O1 O2 O3 OA OB OC OD OE OF OG OH OI OJ OK OL OM ON OP OQ OR OS OT OV OX OY OZ P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 PA PB PC PD PE PF PG PH PI PJ PK PL PM PN PO PP PQ PR PS PT PU PV PW PX PY PZ Q1 Q2 Q3 Q4 Q5 Q6 Q8 Q9 QA QB QC QE QF QG QH QK QL QM QP QR QS QT QV QW QX QY R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 RA RB RC RD RE RF RG RH RI RJ RK RL RM RN RO RP RQ RR RS RT RU RV RW RX RY RZ

Popular Components