3
™
Trizact
Diamond Tile 677XA
Technical Data Sheet
Product Description
September 2003
A structured, fixed abrasive composite pad consisting of an inorganic abrasive (vitreous
diamond agglomerates) in an organic binder (cross-linked polymer) capable of lapping
a multitude of substrates on varied equipment and processes.
–
–
–
–
–
–
–
–
–
–
Eliminates messy slurries
Produces superior surface finish to slurry
Reduces overall process time
Reduces waste disposal costs
Eliminates lap plate replacement
Fits on any lapping machine
Key Features
Grades and Sizes
Available in 3, 6 and 9 micron grades and includes PSA backing.
Manufactured to any shape, with any hole size and hole configuration.
For discs or sheets smaller than 9", specify 3M
™
Trizact
™
Diamond Tile 677XA
For discs or sheets greater than 9", specify 3M
™
Trizact
™
Diamond Tile 677XA Type PC.
Polycarbonate backing adds rigidity to larger discs.
– For discs or sheets greater than 9" and less than 47", 3M
™
Trizact
™
Diamond Tile 677XA
Type PC pads will come in one piece.
– For discs or sheets greater than 47", 3M
™
Trizact
™
Diamond Tile 677XA Type PC pads
will come in four pieces.
Grade selection is based on material type and process requirements. The smallest micron
grade that will give stable cut rate for a given material is recommended. Using the smallest
possible micron grade will result in a finer rough lap finish, reducing polish time by up
to 50%.
Trizact
™
Diamond Tile 677XA is designed to work with double and single sided lapping
machines and can be directly mounted on most plate material types or geometry.
Reference the following Technical Application Bulletins for detailed information on use of
Trizact
™
Diamond Tile 677XA:
– Machine Prep and Pad Mounting Instructions
– Lubricant Use and Filtering Instructions
– Pad Conditioning Instructions
– Frequently Asked Questions
Grade Selection
Equipment
Directions for Use
3M
™
Trizact
™
Diamond Tile 677XA
Page 2
Typical Performance
Characteristics
Note: The following technical information and data should be considered representative or typical only and should not be used for
specification purposes.
Average Material Removal and Finish
Grade
3 micron
Borofloat
™
Glass
58 µm/min
Ra = 1575 Å
Rt = 1.408 µm
Pyrex
®
Glass
55 µm/min
Ra = 1625 Å
Rt = 1.545 µm
BK7
Glass
22 µm/min
Ra = 1629 Å
Rt = 1.455 µm
Fused
Quartz
58 µm/min
Ra = 657 Å
Rt = 0.6437 µm
Window
Glass
n/a
6 micron
105 µm/min
Ra = 2352 Å
Rt = 2.169 µm
115 µm/min
Ra = 2495 Å
Rt = 2.316 µm
76 µm/min
Ra = 2531 Å
Rt = 2.284 µm
69 µm/min
Ra = 951 Å
Rt = 0.9865 µm
43 µm/min
**
Ra = 2814 Å
Rt = 2.503 µm
9 micron
181 µm/min
Ra = 3035 Å
Rt = 2.580 µm
165 µm/min
Ra = 3152 Å
Rt = 2.827 µm
105 µm/min
Ra = 3842 Å
Rt = 3.429 µm
89 µm/min
Ra = 1336 Å
Rt = 1.0792 µm
72 µm/min
**
Ra = 3499 Å
Rt = 3.061 µm
Double sided lapping on Peter Wolters AC 500 machine.
2 psi, 96 rpm, 200 ml/min flow rate, 5% Sabrelube
®
9016 in water
5 minute cycles, ten 65mm diameter substrates
* Data is an average of four 1.1mm scans with a 0.25µm tip radius and 250 µm cut off
** 10% Sabrelube
®
9016 in water
Storage
Pads should be stored flat, in a clean environment. Stacking up to 8 pads, or pad segments,
is acceptable. Do not store pads on edge.
FOR ADDITIONAL INFORMATION:
To request additional product information or to arrange for sales assistance, call 1-800-251-8634. Address
correspondence to: 3M Industrial Business Customer Response Center, Building 21-1W-10, 900 Bush Avenue, St. Paul, MN 55106. Our fax
number is 651-733-9175. In Canada, phone: 1-800-364-3577. In Puerto Rico, phone: 1-787-750-3000. In Mexico, phone: 52-70-04-00.
PRODUCT USE:
All statements, technical information and recommendations contained in this document are based upon tests or experience
that 3M believes are reliable. However, many factors beyond 3M’s control can affect the use and performance of a 3M product in a particular
application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected
to perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M product to deter-
mine whether it is fit for a particular purpose and suitable for the user’s method of application.
WARRANTY AND LIMITED REMEDY:
Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individual
products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the product. Individual products may have
additional or different warranties as stated on product literature, package inserts or product packages. 3M MAKES NO OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE.
User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user’s application. If the 3M product is
defective within the warranty period, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to replace the product or
refund the purchase price.
LIMITATION OF LIABILITY:
Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product,
whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including warranty, contract, negligence, or
strict liability.
Borofloat is a trademark of Schott Corporation.
Pyrex is a registered trademark of Corning Inc.
Sabrelube is a registered trademark of Chemetall Oakite.
3M and Trizact are trademarks of 3M.
3
Industrial Business
Electronics Markets Materials Division
3M Center, Building 225-3N-11
St. Paul, MN 55144-1000
phone: 1-800-251-8634
or 1-651-736-3068
www.3M.com/electronicmaterials
Minimum 30% Post-Consumer Fiber
Printed in U.S.A.
© 3M 2003
IBD311
60-5002-0025-2
京公网安备 11010802033920号
EEWORLD
