Resistance to sulphur-bearing gas (AS version only): ASTM-B-809
Voltage proof
Volts
Note: A 0.01 Ohm addition to be added to the performance of all resistors <10 Ohms.
ΔR%
ΔR%
ΔR%
ΔR%
ΔR%
1
1
1
0.25
0.25
0.25
500
ΔR%
ΔR%
Maximum
1
0.1
Zero at 155°C
0.1
0.2
0.25
0.05
0.05
0.05
Typical
0.25
0.02
Pulse Performance Data
Pulse Performance Data
Lightning Surge
lightning surge resistors are tested in accordance with IEC 60 115-1 using both 1.2/50µs and 10/700µs pulse shapes. 10 pulses are applied. The limit of
acceptance is a shift in resistance of less than 1% from the initial value.
2512
2010
1206
0805
0603
Lightning Surge
lightning surge resistors are tested in
accordance with IEC 60 115-1 using
both 1.2/50µs and 10/700µs pulse shapes.
10 pulses are applied. The limit of
acceptance is a shift in resistance of less
than 1% from the initial value.
2512
2010
1206
0805
0603
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
The single impulse graph is the result of 50 impulses of rectangular shape applied at one minute intervals. The limit of acceptance was a shift in
resistance of less than 1% from the initial value.
2512
2010
1206
0805
0603
Continuous Load Due to Repetitive Pulses
The continuous load graph was obtained by applying repetitive rectangular pulses where the pulse period was adjusted so that the average
power dissipated in the resistor was equal to its rated power at 70°C. Again the limit of acceptance was a shift in resistance of less than 1% from the
initial value
2512
2010
1206
0805
0603
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
[p=30, null, left] DSP is different from FPGA. Programs running on DSP may crash, that is, run away. Checking crashes is basically what every DSP or embedded engineer will experience when debugging. D...
This lecture will introduce TI SITARA's latest AM64XX platform. This platform has A53 and R5F cores, supports functional safety and secure boot, supports multiple network ports and multiple industrial...
I use HSI (36mhz) as the clock and SPI to read the value of L3GA20. When debugging, it seems to get stuck when running at full speed, but it works fine when running in single step. The gyroscope data ...
Measured on a 200MHz ARM9 development board: H.264 QCIF 60fps MPEG4 CIF 60fps H.263 CIF 70fps MPEG2 CIF 75fps MPEG1 CIF 80fps SDK source code is available, welcome to download and evaluate at http://w...
[p=35, null, left][color=#555555]1. A processor can use its peripherals (also considered as functional modules) to implement a certain function. There are usually more than one peripherals with the sa...
DSP and ARM Processors
京公网安备 11010802033920号
EEWORLD
