Utilize your vehicle's battery to efficiently power office equipment on the road or power tools at a work site. Continuously supplies up to 2000W of 120V AC
power to 2 AC outlets from any 12V battery or automotive DC source. Frequency control locks AC output at 60Hz for operating stability of motor loads.
Includes a set of high-current DC input terminals for simple, permanent installation. Highly reliable large transformer design specializes in powering motors
and other inductive loads with high-current startup needs. Built-in RJ45 port allows connection of APS/PowerVerter Remote Switch (
PSRM4)
A
OPTIONAL FEATURES: Optional load sense function enables automatic inverter shutoff and startup as connected equipment is powered off and on. Front
panel load sense potentiometer can be set to shut off or turn on inverter power in response to loads of any level. Ignition Switch Control Jack connects inverter
to vehicle ignition system to automatically control inverter. Inverter ON/OFF Relay Jack connects to a user-supplied on/off indicator for remote visual status of
the operation of the inverter.
NOTE: To protect against high current draw that may occur during inverter failure, a fuse link rated at 400a should be positioned no more than 18" from the
PV2000FC's battery in the positive line.
Features
Allows users to run large, motorized AC appliances from any 12V battery or automotive DC system
Converts 12V DC battery power to 120V AC power
2000W continuous output power
Peak surge output: OverPower (up to 1 hour) 3000W, Double-Boost (up to 10 seconds) 4000W
2 x NEMA 5-15/20R outlets; DC input terminals for 12V battery connection
Frequency control for operating stability
High-efficiency operation conserves batteries to prolong runtime
Diagnostic LEDs indicate load level (high, medium, and low) and battery charge (high, medium, and low)
DC fusing protects inverter against overload
High-impact polycarbonate housing
RJ45 port allows connection of APS/PowerVerter Remote Switch (APSRM4)
Grounding lug properly connects the inverter system to earth ground or vehicle grounding system
Load sense function enables automatic inverter shutoff and startup as connected equipment is powered off and on.
1/3
Load sense function enables automatic inverter shutoff and startup as connected equipment is powered off and on.
Specifications
OUTPUT
Nominal Output Voltage(s)
Supported
Frequency Compatibility
Output Receptacles
Output (Watts)
Continuous Output Capacity (Watts)
Peak Output Capacity (Watts)
Output Voltage Regulation
Output Frequency Regulation
Overload Protection
120V
60 Hz
(2) 5-15R
2000
2000
4000
Maintains PWM sine wave output voltage of 120 V AC (+/-5%)
60 Hz (+/- 0.3 Hz)
Circuit breaker
INPUT
Recommended Electrical Service
Maximum Input Amps / Watts
Input Connection Type
Input Cord Length Details
Voltage Compatibility (VDC)
Requires 12V DC input source capable of delivering 200A for the required duration (when used at full capacity). For
automotive applications, professional hardwire installation with 400A battery system fusing is recommended
Full continuous load - 200A at 12V DC, No load - 2.2A at 12V DC
Set of 2 DC bolt-down wiring terminals
User supplies cabling; 2/0 gauge or larger recommended
12
BATTERY
DC System Voltage (VDC)
12
USER INTERFACE, ALERTS & CONTROLS
Front Panel LEDs
Set of 6 LEDs offers continuous status information on load percentage (6 levels reported) and battery charge level
(7 levels reported). See manual for sequences
3-position on/off/remote switch enables simple on/off power control plus "remote" setting that enables distant on/off
control of the inverter system when used in conjunction with optional
APSRM4
accessory
Switches
PHYSICAL
Shipping Dimensions (hwd / in.)
Shipping Dimensions (hwd / cm)
Shipping Weight (lbs.)
Shipping Weight (kg)
13.5 x 15 x 21.5
34.29 x 38.1 x 54.61
43
19.5
2/3
Unit Dimensions (hwd / in.)
Unit Dimensions (hwd / cm)
Unit Weight (lbs.)
Unit Weight (kg)
Cooling Method
Material of Construction
Form Factors Supported
7.25 x 8.5 x 16.25
18.42 x 21.59 x 41.28
39.0
17.69
Fan
Polycarbonate
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional
mounting information)
ENVIRONMENTAL
Relative Humidity
0-95% non-condensing
SPECIAL FEATURES
Load Sensing
Optional load sense function enables automatic inverter shutoff and startup as connected equipment is powered off
and on. Front panel load sense potentiometer can be set to shutoff or turn on inverter power in response to loads of
not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies:
京公网安备 11010802033920号
EEWORLD
