According to the design requirements, the maximum voltage gain ≥ 60dB is achieved within a wide signal bandwidth (0-10MHz), and the gain can be adjusted continuously or preset in 5dB steps. This is th...
1. The maximum duty cycle Dmax of the MOSFET switch tube is: 323473 323474 Wherein: Vor is the reflected voltage refracted from the secondary side to the primary side. When the input is AC 220V, the r...
Qorvo recently released a tutorial video on achieving seamless interoperability in IoT designs , which points out that using ConcurrentConnect technology makes IoT simpler.How ConcurrentConnect Techno...
LM3S811 Study Notes (1) - GPIO Input and OutputThis is a simple input and output function.Implemented the simple input and output functions of GPIO. When the button is pressed, the LED lights up and w...
I am using Advantech's embedded computer pcm-9579, 2GCF card, 128M memory, data acquisition card is pcm-3718h, using interrupt method to get data, 4 channels 0, 1, 2, 3; the program written with Delph...
Today, as network technology becomes more and more popular, industrial field instruments, data acquisition and control equipment are becoming more and more networked, and the combination of industr...[Details]
Signal sources have developed to a very wide range today. We can classify them according to the frequency range: ultra-low frequency (0.1m~1kHz), audio (20Hz~20kHz), video (20kHz~10MHz), radio fre...[Details]
0 Introduction
At present, the analysis of intra-pulse signals in pulse radar has always been a hot topic and difficulty in research. How to measure the intra-pulse carrier frequency more ...[Details]
The overcurrent and overheating coordinated protection technology implemented by polymer positive temperature coefficient devices (PPTC) can protect motors, controllers and electronic components in...[Details]
1 Introduction
Intelligent software agents are software programs that can perform specific tasks for users, have a certain degree of intelligence, can autonomously perform some tasks, and ...[Details]
Abstract:
Under high dynamic conditions, combined with GEC's twelve-channel correlator GP2021, this paper discusses the structural design of GPS receivers and the key technologies inv...[Details]
1 Introduction
Economic development has prompted people to continuously improve their security awareness. When traditional local analog monitoring methods gradually fail to meet the needs of l...[Details]
Novaled, a German company, has successfully developed p-type and n-type field effect transistors based on a single-layer pentacene semiconductor layer by using its own p-type and n-type dopants. This ...[Details]
Abstract:
A single pulse secondary radar reply processor implemented with EPLD. Its main functions include: reply frame pulse detection, reply information decoding, assembling reply inf...[Details]
Abstract: In many SCART applications, due to the complex signal switching requirements, dedicated ICs are usually used to implement SCART connections. This will bring cost pressure to single SCART ...[Details]
1 Introduction
Many test systems require real-time data acquisition while continuously moving. If the test process is discontinuous, or the test position is in front and the acquisition is...[Details]
Abstract: This paper analyzes the technical characteristics of mobile streaming media and the core technical protocol of mobile streaming media - H.264 protocol, and explains the two major domesti...[Details]
0 Introduction
μClinux is an operating system for embedded control. It inherits most of the features of the Linux kernel and is designed for embedded microprocessors without a memory manag...[Details]
The dual-field-of-view infrared optical system can simultaneously provide two images with different magnifications and fields of view. The large field of view in the system has a lower resolution a...[Details]
0 Introduction
In the mixed analog and digital circuit system, multiple power supplies are required. In order to reduce the number of external power supplies and realize the miniaturizatio...[Details]