1. Contact rating - Product of the switching voltage and current should never exceed the wattage rating. Contact Littelfuse for additional load/life information.
2. When switching inductive and/or capacitive loads, the effects of transient voltages and/or currents should be considered. Refer to Application Notes AN108A and AN107 for details.
3. Breakdown Voltage - per MIL-STD-202, Method 301.
4. Electrical Load Life Expectancy - Contact Littelfuse with voltage, current values along with type of load.
5. This resistance value is for 11.81mm wire length. Resistance changes when wire lengthens.
6. Operate (including bounce)/Release Time - per EIA/NARM RS-421-A, diode suppressed coil (Coil II).
7. Shock and Vibration - per EIA/NARM RS-421-A and MIL-STD-202.
8. For custom modifications to the wire length or size, or adding a special connector, please contact Littelfuse.
Sensitivity Options (Using 57070 Actuator)
Select Option
Switch Type
S
T
U
V
Activate Distance–D
mm (inch)
Average
Activate Distance–D
Activate Distance–D
Activate Distance–D
Pull-In
Pull-In
Pull-In
Pull-In
mm (inch)
mm (inch)
mm (inch)
AT Range
AT Range
AT Range
AT Range
Average
Average
Average
1
2
3
Normally Open
High Voltage
Change Over
12-18
--
15-20
15-20
8.4 (.330)
--
6.5 (.255)
6.5 (.255)
17-23
17-23
20-25
20-25
6.6 (.260)
6.6 (.260)
4.9 (.193)
4.9 (.193)
22-28
22-28
25-30
25-30
5.1 (.200)
5.1 (.200)
3.7 (.146)
3.7 (.146)
27-33
27-33
--
--
4.0 (.157)
4.0 (.157)
--
--
4 Normally Closed
Note:
1. Pull-In AT Range: These AT values are the bare reed switch AT before modification.
2. The activation distance is average value on the final sensor assembly.
How Flyback Converter Works : https://training.eeworld.com.cn/course/4405Flyback converter is isolated converter.... used in low and medium power applications.. It has two modes of operation namely mo...
Moderator chip currency issuance requirements: [b] Monthly online time > 30 hours, monthly posts > 30 posts[/b] Some small rules for moderators: [url=https://bbs.eeworld.com.cn/thread-77551-1-1.html]h...
First of all, the development of ARM can be described as a great success. Opening the websites of various companies, most of the engineer positions in the recruitment are in the embedded field. Broadl...
1 Introduction
The high temperature tester is mainly used for temperature tracking measurement and data acquisition during the heating process. By systematically analyzing the test data, the...[Details]
Remote keyless entry (RKE) systems have become popular with users, with more than 80% of new cars in North America and more than 70% in Europe equipped with RKE systems. In addition to the obvious ...[Details]
In public places such as schools, government agencies, factories and mines, as well as public corridors in residential areas, the phenomenon of long-burning lights is very common, which causes a h...[Details]
introduction
For the voltage regulator modules (VRMs) that power the latest computer central processing units (CPUs), power supply designers have historically used multiphase interleaved b...[Details]
In the previous series, we have listed some basic knowledge of C language in Tables 1 to 3. We hope that beginners can strengthen their memory of the above tables and gradually learn to use them wh...[Details]
AD8205 is
a single-supply high-performance differential
amplifier
launched by
Analog
Devices of the United States
. The typical single-supply voltage is 5V, and its common-mode volta...[Details]
Today, with energy becoming increasingly scarce, the utilization of natural energy has become the focus of people's attention. Among various natural energies, the endless solar energy is highly fav...[Details]
Since the late 1990s, with the demand for higher system efficiency and lower power consumption, the technological update of telecommunications and data communication equipment has promoted the deve...[Details]
1. Overview
At present, an information revolution is in the ascendant around the world, led by microelectronics, computers and communication technologies, and centered on information technolog...[Details]
1 Introduction
With the improvement of people's quality of life, lamps are no longer just basic indoor lighting tools, but also a kind of practical art for architectural decoration. When ther...[Details]
1 Introduction
Ultrasound refers to elastic vibration with a frequency higher than the audible frequency limit (i.e., in the frequency band above 20 kHz). The propagation process of this vib...[Details]
Overview
By transmitting ultrasonic energy into the human body and receiving and processing the returning reflected signals, phased array ultrasound systems can generate images of organs and s...[Details]
1 Development of LED Film and Television Lighting
1.1 The significance of developing film and television lighting
Lighting power consumption accounts for a large proportion of the total p...[Details]
Every time I go home and walk up the stairs, I am always scared. The corridor lights are often broken, and no one changes the bulbs, or they are not smart enough and need to be operated manually. E...[Details]
Rated capacity refers to the maximum output power of the UPS (the product of voltage V and current A).
Usually, the UPS power supplies sold on the market are marked with "W" (watt) for smaller...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
