11/4/2017
Type 12 Mild Steel Two Door Wallmount Enclosure (1422 Series) - Hammond Mfg.
Quality Products. Service Excellence.
Type 12 Mild Steel Two Door Wallmount Enclosure
1422 Series
Continuous Hinge Door with Handle
Application
Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
Provides a degree of protection from falling dirt, dust, oil and water.
Standards
UL 508A Type 12
CSA Type 12
Complies with
NEMA Type 12
IEC 60529, IP54
Construction
Enclosures are formed 12 or 14 gauge steel, as noted.
Smooth, continuously welded seams without knockouts, cutouts or holes.
Body stiffeners are provided in enclosures 30” high or more for extra rigidity.
Welded brackets provide for enclosure mounting.
Gasketed overlapping doors eliminate the need for a center post.
Continuously hinged doors may be removed by pulling the hinge pin.
Doors are secured with a three point latch and operated with a key locking automotive
type handle.
Latch rods are equipped with rollers for easier door closing.
Oil resistant gaskets are permanently secured.
A removable 10 gauge inner panel is included in enclosures as noted.
Smaller sizes include a 12 gauge inner panel.
Collar studs are provided for mounting inner panels.
A grounding stud is provided in the enclosure and a bonding stud is provided on the door.
A literature pocket is provided for the inside of the door.
Finish
Cover and enclosure are phosphatized and finished in recoatable smooth ANSI 61 gray
powder coating on the outside, with white powder coating on the inside.
Removable inner panel is finished in white powder coating.
Accessories
Inner Panels
Blowers and Fans
Door Stop Kit
Enclosure Stabilizers
Floor Stand Kit
Heaters
Type 1 Louvered Ventilating Plates
Window Kits
Cooling Products
Ventilation
Drip Shield Kit
Filtered Fans
Gland Plates
Lighting
Temperature Controls
https://www.hammfg.com/electrical/products/industrial/1422
1/3
京公网安备 11010802033920号
EEWORLD
