• Extended guide rails enable accurate and easy card
insertion
• Single row surface mount solder tails facilitate auto
placement and IR soldering
• Optional 2 mm board standoff enables board
population
• Meets CFA standards for known compatibility and
reliability
• Optional ejector and card retainer can be purchased
pre-assembled or separately
• Integral side solder tab with card grounding feature
and also prevent the card from ‘flying’ out of header
during ejection
• See the Regulatory Information Appendix (RIA) in
the “RoHS compliance” section of
www.3Mconnector.com for compliance
information (RIA E1 & C1 apply)
Date Modified: May 12, 2010
TS-2329-A
Sheet 1 of 4
Physical
Material: High Temperature Thermoplastic
Flammability: UL 94V-0
Color: Beige
Insulation:
Contact:
Terminal Plating:
Material: Copper Alloy
Underplating: 80 µ" [2.03 µm] Min. Nickel
Wiping Area: 15 µ” or 30 µ” [0.38 – 0.76 µm] Min. Gold
Solder Tail: 100 µ” [2.54 µm] Min. Matte Tin
Electrical
Insulation Resistance:
10
3
MΩ at 500 V
AC
Withstanding Voltage:
500 V
AC
for 1 minute
Current Rating:
1.5 A per pin
Environmental
Temperature Rating:
-40°C to 85°C
Process Temperature Rating:
Max. 260°C (per J-STD-020C)
Moisture Sensitivity Level:
1 (per J-STD-020C)
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Connector for CFast
™
Card
40.16±0.1
[1.581±0.004]
7G24 Series
( )
7.62
[.300]
1.27
[.050](22X)PITCH
0.45±0.05
[.018±0.002]
B
S1
( )
( )
39.23
[1.545]
26.23
[1.033]
( )
( )
20.32
[.800]
4.595
[.181]
PC17
4.595
[.181]
PC1
S7
25.38±0.1
[.999±0.004]
( )
( )
( )
20.32
[.800]
7.62
[.300]
33.66±0.08
[1.325±0.003]
C
1.27
[.050](22X)PITCH
0.40±0.05
[.016±0.002]
C0.6(2X)
(
(
47.80
[1.882]
48.50
[1.910]
)
)
43.03±0.08
[1.694±0.003]
1.300
[.051]
A
A
C OF C
L
40.16±0.1
[1.581±0.004]
45.40±0.1
[1.788±0.004]
( )
( )
25.10±0.1
[.988±0.004]
1.40
[.055]
1.650
[.065]
1.0
[.039]
0.900
[.035]
1.250
[.049]
mm
[inch]
Part No.
N7G24-A0B2XX-00-XHT
N7G24-A0B2XX-10-XHT
Dimension ‘A’
mm [inch]
5.70 [.224]
7.70 [.303]
Tolerance Unless Noted
.0
mm
inch
±.25
±.010
.00
±.15
±.006
.000
±.05
±.002
[ ] Dimensions for Reference
Only
TS-2329-A
Sheet 2 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Connector for CFast
™
Card
49.80
[1.961] MIN
7G24 Series
(
40.16
[1.581]
)
24.80
[.976] TYP
41.05
[1.616] MIN
C OF D
L
18.32
[.721] MAX (2X)
51.60
[2.032] MIN
18.15
[.715] MIN (2X)
COMPONENT REFLOW KEEP OUT ZONE
(FOR NO STANDOFF HEIGHT CONNECTOR)
49.80
[1.961] MIN
(
18.32
[.721] MAX (2X)
40.16
[1.581]
)
6.50
[.256] MIN (2X)
6.92
[.272] MIN (2X)
11.50
[.453] MIN (2X)
C OF D
L
32.80
[1.291] MAX
(
24.80
[.976]
TYP
)
14.75
[.581] MIN (2X)
39.23
[1.545] MAX
51.60
[2.032] MIN
COMPONENT REFLOW KEEP OUT ZONE
(FOR 2MM STANDOFF CONNECTOR)
TS-2329-A
Sheet 3 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Connector for CFast
™
Card
7G24 Series
40.16
[1.581]
6.80
[.268]
3.00
[.118]
8.105
[.319]
20.32
[.800]
4.595
[.181]
7.62
[.300]
1.27
[.050](22X)
0.80±0.05
[.031±0.002]
0.08
L
D
Ø2.30
[Ø.091](2X)
Ø1.75
[Ø.069](2X)
3.00
[.118](2X)
4.00
[.157](2X)
PC17
25.10 24.80
[.988] [.976]
2.50
[.098]
PC1
S7
C OF D
L
S1
Ø1.35
[Ø.053](2X)
45.40
[1.788]
46.60
[1.835]
RECOMMENDED PCB THICKNESS 1.65 [0.066] NOMINAL
HOLE & PAD PATTERN TOL ±0.05 [0.002]
Ordering Information
Physical Configuration (Total Arm Length)
A = 39.23 mm
Card Polarization
B = Normal
**D = Inverse
Mounting Style
2 = Surface Mount, Right Angle
1.27 mm Tail Pitch
N7G24 - A 0 X X XX - X 0 - X XX
Packaging Option
HT = Hard Tray
**WF = Tape & Reel
Preassembly
0 = No preassembly accessory
3 = Right Dual-Push Ejector
(P/N: 7G24-B5A6-05)
5 = Left Dual-Push Ejector
(P/N: 7G24-B6A6-05)
7 = Latching Retainer
(P/N: 7E50-C016-00)
0 = No Standoff
1 = 2 mm Standoff
Plating Suffix
**EA=15 µ" min. Gold plated at mated end and Gold Flash at soldertail. 80 µ" min.
Nickel underplated all over.
**EB=30 µ" min. Gold plated at mated end and Gold Flash a soldertail. 80 µ" min.
Nickel underplated all over.
RA=15 µ" min. Gold plated at mated end and 100 µ" min. Matte-Tin plated at soldertail.
80 µ" min. Nickel underplated all over.
RB=30 µ" min. Gold plated at mated end and 100 µ" min. Matte-Tin plated at soldertail.
80 µ" min. Nickel underplated all over.
Notes:
** are for future development
TS-2329-A
Sheet 4 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase.
3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
I am working on a Samsung MCU project and cannot find a compiler. Can any expert tell me the compiler for Samsung MCU? I need it urgently. Thank you very much!...
I'm going to discuss a circuit diagram with you this afternoon. Is there anyone who responds? Comrades, please come out!!!This is a current to voltage conversion circuit. What is the role of the secon...
This is an intelligent parking system based on AM3359 and DM6437, which can realize 360-degree panoramic automatic parking; and can interact with the car through the mobile phone APP to realize the fu...
I want to build a wireless sensor gateway, transplant the UCOS operating system, and convert ZigBee data into data that can be viewed on the Internet. I wonder which one is more suitable, LWIP or UTCP...
Hello everyone, I added IE components in VS2005, and the program compiled and burned without any problems. But the program cannot start normally. I connected the serial port and printed information. A...
I am lazy, mainly because I often feel dizzy after reading the datasheet for a short time. I think it is convenient to ask everyone on the forum, and I feel more confident, after all, everyone has exp...
Traditional broadcasting systems generally need to be operated manually at a fixed time, and can only realize one-way broadcasting with few functions. Traditional bell ringing equipment has a singl...[Details]
1. Circuit composition
The whole circuit consists of two parts:
1. Power saving control circuit
As shown in the figure below. Including delay circuit and drive circuit.
(1) Delay ci...[Details]
1. Introduction
With the growth of parking demand, the scale of parking lots is becoming larger and larger. A lot of research has been done on intelligent parking lots in China, but most of th...[Details]
Converged processors meet scalability requirements
In current embedded system design, solutions based on MCU, DSP, FPGA and ASIC account for more than 90% of the market share. These solutions ...[Details]
To differentiate their products in a crowded and competitive market, manufacturers of handheld devices often consider battery life and power management as key selling points for cell phones, PDAs, ...[Details]
July 11, 2012, Beijing - Altera Corporation (NASDAQ: ALTR) today announced the launch of 40-Gbps Ethernet (40GbE) and 100-Gbps Ethernet (100GbE) intellectual property (IP) core products. These core...[Details]
1 Introduction
In recent years, there have been many major advances in the production technology and processes of automotive headlights, which have greatly improved the performance of automoti...[Details]
In the single-chip microcomputer system, in addition to display devices, sound devices are often used, and the most common sound device is the buzzer. Buzzers are generally used for some low-demand...[Details]
Different initialization between C8051F and 80C51 series microcontrollers
In the past 30 years, major electronic component manufacturers in the world have launched their own unique single-chip...[Details]
Motors are important products that convert electrical energy into mechanical energy to achieve automation, and they are widely used in industrial control, medical electronics, white a...[Details]
Analysis of the three core aspects of digital TV transmission standards
According to the differences in regionality, transmission method and modulation method, the transmission method needs to...[Details]
Almost everyone in a student dormitory has a bedside lamp. But if you want to read for a while after turning off the lights and don't want to disturb your roommates' sleep, you may need a reading l...[Details]
The fluorescent lamps and energy-saving lamps we commonly use now have greatly improved luminous efficiency compared with the earlier ordinary incandescent lamps and have been widely used. With the...[Details]
Today, with the increasing integration of functions, mobile phones can also be used as portable media players (PMP), digital cameras, handheld computers (PDAs), and even global positioning systems (GP...[Details]
Currently, high-frequency and high-efficiency DCDC converters are increasingly used in automotive electronic systems.
High switching frequency can use smaller power inductors and output filter...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
