IllumInatIon
luXEon Q
Standard ceramic 3535 footprint delivering
high efficacy at high-drive current
LUXEON Q delivers superior performance in a high-power LED that
serves as a drop-in replacement for products that use the standard 3535
surface mount package. LUXEON Q is the first high-power LED based
on the Lumileds FlipChip Technology chip-scale package (CSP) device
architecture. LUXEON Q takes advantage of a fully developed ecosystem
for 3535 components, including optics, to speed the time-to-market for
indoor and outdoor luminaires.
FEaturEs and BEnEFIts
Industry standard 3535 package for optimization with existing designs
Lumileds FlipChip Technology for industry leading performance
High efficacy at high drive current enables high lumen and lm/$ at high lm/W
3-step MacAdam ellipse color definition:
Freedom from Binning
for color
consistency
UL-recognized component [E352519]
PrImary aPPlIcatIons
Downlights
High Bay & Low Bay
Lamps
Outdoor
Spotlights
COMPLIANT
RoHS
DS118 LUXEON Q Product Datasheet ©2015 Lumileds Holding B.V. All rights reserved.
Table of Contents
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Average Lumen Maintenance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Selection & Optical Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Reflow Soldering Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Relative Spectral Distribution vs. Wavelength Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Typical Light Output Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Typical Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Typical Radiation Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Emitter Pocket Tape Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Emitter Reel Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Product Binning and Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Luminous Flux and Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
LUXEON Q 3-step and 5-step MacAdam ellipse Color Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
DS118 LUXEON Q Product Datasheet 20150827 ©2015 Lumileds Holding B.V. All rights reserved.
i
General Information
Product Nomenclature
LUXEON Q emitters are specified and binned “hot” under conditions comparable to those found in “real-world”
lighting products. The test conditions for LUXEON Q are 350mA DC with junction temperature at 85°C.
The part number designation is explained as follows:
L1Q0-xxyy00000zzz0
Where:
xx
—
yy
zzz
—
—
designates nominal ANSI CCT (27 for 2700K, 30 for 3000K)
designates minimum CRI performance (70 for 70CRI, 80 for 80CRI)
designates minimum flux performance at standard binning current and temperature (e.g.,
090 for 90 lumens, 110 for 110 lumens, etc). 000 designates full distribution flux performance.
Therefore, 80CRI products tested and binned at 3000K with a 110lm minimum flux at binning current and
temperature will have the part numbering scheme:
L1Q0-3080000001100
Therefore, 70CRI products tested and binned at 5700K with a 130lm minimum flux at binning current and
temperature will have the following part numbering scheme:
L1Q0-5770000001300
Average Lumen Maintenance Characteristics
LUXEON Q products are tested in compliance with LM-80. Please contact your local Lumileds Technical Solutions
Manager for TM-21 extrapolations or other support.
Environmental Compliance
Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Q
is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment,
namely the RoHS and REACH directives. Lumileds will not intentionally add the following restricted material to the
LUXEON Q: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated
diphenyl ethers (PBDE).
DS118 LUXEON Q Product Datasheet 20150827 ©2015 Lumileds Holding B.V. All rights reserved.
2
Product Selection & Optical Characteristics
Product Selection Guide for LUXEON Q Emitters
Junction Temperature = 85°C
Table 1.
Typical Performance Characteristics at 350mA, 700mA, and 1000mA for LUXEON Q, Junction Temperature = 85°C
Part Number
L1Q0-278000000zzz0
L1Q0-308000000zzz0
L1Q0-358000000zzz0
L1Q0-407000000zzz0
L1Q0-507000000zzz0
L1Q0-577000000zzz0
Nominal
ANSI CCT
2700K
3000K
3500K
4000K
5000K
5700K
CRI
80
80
80
70
70
70
Luminous Flux
(Lm) Min
350mA
80
90
90
110
110
110
Typical Luminous Flux
(Lm)
350
700
1000
mA
mA
mA
113
199
261
115
117
132
133
134
204
209
236
237
241
270
278
313
315
320
Typical Forward
Voltage (V
f
)
350
700
1000
mA
mA
mA
2.81
2.93
2.99
2.81
2.81
2.81
2.81
2.81
2.93
2.93
2.93
2.93
2.93
2.99
2.99
2.99
2.99
2.99
Typical Efficacy
(Lm/W)
350
700
1000
mA
mA
mA
115
97
87
117
119
134
135
136
99
102
115
116
118
88
92
104
105
106
Notes for Table 1:
1. Lumileds maintains a tolerance of ± 6.5% on luminous flux and ± 2 on CRI measurements.
Optical Characteristics
LUXEON Q at Test Current
[1]
, Junction Temperature = 85°C
Table 2.
Nominal
ANSI CCT
2700K
3000K
3500K
4000K
5000K
5700K
Part
Number
L1Q0-278000000zzz0
L1Q0-308000000zzz0
L1Q0-358000000zzz0
L1Q0-407000000zzz0
L1Q0-507500000zzz0
L1Q0-577000000zzz0
Typical
Color Temperature
CCT
2725K
3045K
3465K
3985K
5028K
5665K
Typical Total Included
Angle
[2]
(degrees)
θ
0.90V
160
160
160
160
160
160
Typical Viewing Angle
[3]
(degrees)
2θ 1/2
135
135
135
135
135
135
Notes for Table 2:
1. Test current is 350mA D.C. for all L1Q0-xxyy00000zzz0 emitters.
2. Total angle at which 90% of total luminous flux is captured.
3. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is 1/2 of the peak value.
DS118 LUXEON Q Product Datasheet 20150827 ©2015 Lumileds Holding B.V. All rights reserved.
3
Electrical Characteristics
Electrical Characteristics at test current for LUXEON Q
Junction Temperature = 85°C
Table 3.
Forward Voltage V
f
(V)
[1]
Nominal
ANSI CCT
Minimum
2.50
2.50
2.50
2.50
2.50
2.50
Maximum
3.25
3.25
3.25
3.25
3.25
3.25
Typical Temperature
Coefficient
of Forward Voltage
[2]
(mV/°C)
DV
F
/ DT
J
-1.6
-1.6
-1.6
-1.6
-1.6
-1.6
Typical Thermal Resistance
Junction to Thermal Pad
(°C/W)
Rθ
J-C
7
7
7
7
7
7
2700K
3000K
3500K
4000K
5000K
5700K
Notes for Table 3:
1. Lumileds maintains a tolerance of ± 0.06V on forward voltage measurements.
2. Measured between T
J
= 25°C and T
J
= 110°C at I
f
= 350mA.
Absolute Maximum Ratings
Table 4.
Parameter
DC Forward Current (mA)
[1] [2]
Peak Pulsed Forward Current (mA)
[1] [3]
ESD Sensitivity
LED Junction Temperature
[1]
Operating Case Temperature at 700mA
Storage Temperature
Soldering Temperature
Allowable Reflow Cycles
Reverse Voltage (Vr)
[4] [5]
LUXEON Q
1050
1200
< 8000V Human Body Model (HBM) Class 3A JESD22-A114-E
135°C
-40°C - 135°C
-40°C - 135°C
JEDEC 020c 260°C
3
LUXEON Q LEDs are not designed to be driven in reverse bias
Notes for Table 4:
1. Proper current derating must be observed to maintain junction temperature below the maximum. For additional information on thermal measurement guidelines please refer to Application
Brief AB118 (not available yet).
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple”, with frequencies
≥
100 Hz and amplitude
≤
150mA are acceptable, assuming the average current throughout each cycle does not exceed 1050mA.
3. Pulsed operation with a peak drive current of 1200mA is acceptable if the pulse on-time is
≤
5 ms per cycle and the duty cycle is
≤
50%.
4. Transient reverse voltages and surge currents due to electrical switching or supply interruptions are acceptable if these events do not last for more than 10ms, the amplitude of the reverse
voltage does not exceed 5V and the reverse current is less than 200μA.
5. Max 5V reverse for up to 10s is an acceptable beginning of life, one time test condition.
DS118 LUXEON Q Product Datasheet 20150827 ©2015 Lumileds Holding B.V. All rights reserved.
4
京公网安备 11010802033920号
EEWORLD
