The above Type Numbers represent the order groups which include only a few brightness groups (see page 5). Only one group will be shipped on each
packing unit (there will be no mixing of two groups on each packing unit). E. g. LS E63B-BBCB-1-1 means that only one group BB, CA, CB will be
shippable for any packing unit. In order to ensure availability, single brightness groups will not be orderable.
In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one packing unit.
E. g. LS E63B-BBCB-1-1 means that only one wavelength group 1 will be shippable. LS E63B-BBCB-1-1 means that the device will be shipped within
the specified limits as stated on page 5In order to ensure availability, single wavelength groups will not be orderable (see page 5).
In a similar manner for colors where forward voltage groups are measured and binned, single forward voltage groups will be shipped on any one reel.
E. g. LS E63B-BBCB-1-1 means that only one forward voltage group 3, 4 will be shippable. In order to ensure availability, single wavelength groups will
not be orderable (see page 5for explanation).
Anm.:
Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5). Es
wird nur eine einzige Helligkeitsgruppe pro Verpackungseinheit geliefert. Z. B. LS E63B-BBCB-1-1 bedeutet, dass in einer Verpackungseinheit nur eine
der Helligkeitsgruppen BB, CA, CB enhalten ist. Um die Liefersicherheit zu gewährleisten, können einzelne Helligkeitsgruppen nicht bestellt werden.
Gleiches gilt für die Farben, bei denen Wellenlängengruppen gemessen und gruppiert werden. Pro Verpackungseinheit wird nur eine
Wellenlängengruppe geliefert. Z. B. LS E63B-BBCB-1-1 bedeutet, dass in einer Verpackungseinheit nur eine der Wellenlängengruppen 1 enthalten ist
(siehe Seite 5). LS E63B-BBCB-1-1 bedeutet, dass das Bauteil innerhalb der spezifizierten Grenzen geliefert wird. Um die Liefersicherheit zu
gewährleisten, können einzelne Wellenlängengruppen nicht bestellt werden.
Gleiches gilt für die LEDs, bei denen die Durchlassspannungsgruppen gemessen und gruppiert werden. Pro Gurt wird nur eine
Durchlassspannungsgruppe geliefert. Z. B. LS E63B-BBCB-1-1 bedeutet, dass nach Durchlassspannungsgruppen gruppiert wird. Auf einem Gurt ist
nur eine der Durchlassspannungsgruppen 3, 4 enthalten (siehe Seite 5für nähere Informationen). Um die Liefersicherheit zu gewährleisten, können
einzelne Durchlassspannungsgruppen nicht direkt bestellt werden.
2013-05-17
2
Version 1.0
Maximum Ratings
Grenzwerte
Parameter
Bezeichnung
Operating temperature range
Betriebstemperatur
Storage temperature range
Lagertemperatur
Junction temperature
Sperrschichttemperatur
Forward current
Durchlassstrom
(T
S
= 25 °C)
Surge current
Stoßstrom
(t <= 10
μs;
D = 0.005; T
S
= 25 °C)
Reverse voltage
2)
page 19
Sperrspannung
2)
Seite 19
(T
S
= 25 °C)
Symbol
Symbol
T
op
T
stg
T
j
I
F
Values
Werte
-40 ... 100
-40 ... 100
125
70
LS E63B
Unit
Einheit
°C
°C
°C
mA
I
FM
100
mA
V
R
12
V
V
ESD
ESD withstand voltage
ESD Festigkeit
(acc. to ANSI/ESDA/JEDEC JS-001 - HBM, Class
2)
2
kV
2013-05-17
3
Version 1.0
Characteristics
(T
S
= 25 °C; I
F
= 50 mA)
Kennwerte
Parameter
Bezeichnung
Wavelength at peak emission
Wellenlänge d. emittierten Lichtes
Dominant Wavelength
3)
page 19
Dominantwellenlänge
3)
Seite 19
Spectral bandwidth at 50% I
rel max
Spektrale Bandbreite b. 50% I
rel max
Viewing angle at 50 % I
V
Abstrahlwinkel bei 50 % I
V
Forward voltage
4)
page 19
Durchlassspannung
4)
Seite 19
Reverse current
Sperrstrom
(V
R
= 12 V)
Temperature coefficient of
λ
peak
Temperaturkoeffizient von
λ
peak
(-10°C
≤
T
≤
100°C)
Temperature coefficient of
λ
dom
Temperaturkoeffizient von
λ
dom
(-10°C
≤
T
≤
100°C)
Temperature coefficient of V
F
Temperaturkoeffizient von V
F
(-10°C
≤
T
≤
100°C)
Real thermal resistance junction / ambient
5)
page 19
, 6)
page 19
LS E63B
Symbol
Symbol
(typ.)
(min.)
(typ.)
(max.)
(typ.)
(typ.)
(min.)
(typ.)
(max.)
(typ.)
(max.)
(typ.)
λ
peak
λ
dom
λ
dom
λ
dom
Δλ
2ϕ
V
F
V
F
V
F
I
R
I
R
TC
λpeak
Values
Werte
645
627
633
639
15
30
1.90
2.20
2.50
0.01
10
0.15
Unit
Einheit
nm
nm
nm
nm
nm
°
V
V
V
μA
µA
nm/K
(typ.)
TC
λdom
0.05
nm/K
(typ.)
TC
V
-3.40
mV/K
(max.)
R
th JA real
300
K/W
Realer Wärmewiderstand Sperrschicht /
Umgebung
5)
Seite 19
, 6)
Seite 19
6)
page 19
Real thermal resistance junction / solder point
(max.)
R
th JS real
130
K/W
Realer Wärmewiderstand Sperrschicht / Lötpad
6)
Seite 19
Note:
Anm.:
Individual forward voltage groups see next page
Durchlassspannungsgruppen siehe nächste Seite
2013-05-17
4
Version 1.0
Brightness Groups
Helligkeitsgruppen
Group
Gruppe
Partial Flux
1)
page 19
Partieller Lichtfluss
1)
Seite 19
LS E63B
Partial Flux
Partieller Lichtfluss
(max.) E
v
[lux]
2800
3550
4500
Luminous Flux
7)
page 19
Lichtstrom
7)
Seite 19
(typ.)
Φ
V
[mlm]
1300
1600
2000
(min.) E
v
[lux]
BB
CA
CB
Note:
2240
2800
3550
The standard shipping format for serial types includes either a lower family group, an upper family group or
a grouping of all individual brightness groups of only a few brightness groups. Individual brightness groups
cannot be ordered.
Die Standardlieferform von Serientypen beinhaltet entweder eine untere Familiengruppe, eine obere
Familiengruppe oder eine Sammelgruppe, die aus nur wenigen Helligkeitsgruppen besteht. Einzelne
Helligkeitsgruppen sind nicht bestellbar.
Anm.:
Forward Voltage Groups
4)
page 19
Durchlassspannungsgruppen
4)
Seite 19
Group
Gruppe
3
4
(min.) V
F
[V]
1.90
2.20
(max.) V
F
[V]
2.20
2.50
Dominant Wavelength Groups
3)
page 19
Dominant Wellenlängengruppen
3)
Seite 19
Group
Gruppe
1
Note:
Anm.:
super red
(min.)
λ
dom
[nm]
627
(max.)
λ
dom
[nm]
639
No packing unit / tape ever contains more than one color group for each selection.
In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe für jede Farbe enthalten.
Our company is now recruiting authors of books on driver development. The salary is generous. If you are interested, you can contact me for details. QQ878298915. Please indicate the driver. Email pyq_...
Moderator, I have a question!I use the internal AD of 149, and the collected data is unstable. It is the same when the input is directly pulled down. The jump is about 15, and occasionally it will rea...
1. I always thought that the STC microcontroller could download programs after reset, but after remaking the board, I found that the STC can only download programs after each power-on. In this case, t...
[align=left][size=14px][color=#000000][font=SimSun][size=11pt][font=SimSun]Here we share the official[/font][/size][/font][font=SimSun][size=11pt][url=http://www.st.com/content/st_com/en/products/mems...
I just learned microcontrollers. How do I send the data received by the I/O port through the serial port? In other words, how do I pass the bytes to SBUF? Thank you...
While
the solid-state battery
industry is still engaged in a long technological marathon for
the "ultimate solution" for
electric vehicles
, some companies have begun looking for mor...[Details]
Tesla and BYD, vying for dominance in the global electric vehicle market, are reportedly considering adopting Samsung's AMOLED (active-matrix organic light-emitting diode) technology for their next...[Details]
Reflow soldering is a critical process in electronics assembly production, and the cleanliness of the reflow oven has a direct impact on product quality. Dust and residue accumulation within the ov...[Details]
A parallel inverter consists of two thyristors (T1 and T2), a capacitor, a center-tapped transformer, and an inductor. The thyristors provide a current path, while the inductor L maintains a consta...[Details]
introduction
With the development of digital and network technologies, broadcasting technology has become increasingly diversified, with the most significant trend being the transition from an...[Details]
ISP devices, such as field programmable devices (FPGAs and CPLDs), do not require a programmer. Using programming kits provided by the device manufacturer, they employ a top-down modular design app...[Details]
In recent years, many people have switched to new energy vehicles, and this type of vehicle has indeed been highly sought after and is considered the future direction of automobile development, and...[Details]
Electric motors and internal combustion engines of the same power have similar torque levels. High power requires high torque, and torque determines a vehicle's acceleration speed, commonly known a...[Details]
As the main model among new energy vehicles, pure electric vehicles have received strong support and encouragement from the country in recent years, and their development is changing with each pass...[Details]
On August 25th, TSMC, the world's leading contract chip manufacturer, attracted significant attention for its decision to build a chip manufacturing facility in Arizona. TSMC primarily manufactures...[Details]
Preface
Low-voltage motors are widely used in nonferrous metallurgical plants. Their abnormal operation not only impacts normal production but can also threaten human life. Therefore, providin...[Details]
With the advancement of science and technology and the promotion of green, energy-saving, and circular development, the demand for precise control and accurate measurement is increasing. In the pow...[Details]
With the support and encouragement of national policies, some Internet car manufacturers have also joined the new energy vehicle manufacturing industry. From the perspective of new car manufacturer...[Details]
Nascent Micro is launching devices covering a wide range of power applications, including gallium nitride (GaN) drivers, dual-channel automotive drivers, and battery protection MOSFETs.
...[Details]
0 Introduction
DVI (Digital Visual Interface) is a hot topic in current digital display research and application. Video processing technologies for DVI output not only address issues such as h...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
