0.3mm Pitch 1.1mm Height Top and Bottom Contact
Back-Flip actuator Flexible Printed Circuit Connectors
FH39 Series
●
3.45mm Depth
Dec.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
1.1mm
13.
9m
m(3
9p
os.)
3
5
.4
m
m
Fig.1
■Features
1. Low-profile 0.3mm pitch connector with
top and bottom contact
Usable via either its top or bottom contact point,
this connector achieves enhanced freedom in terms
of the product design.
●
Easy FPC insertion
Actuator
2. High contact reliability thanks to the
spring terminal structure
Because both top and bottom contact points are
spring-loaded, the contact point adapts to the FPC
motion, and high contact reliability is ensured.
3. Delivered with the actuator open
FPC can be immediately inserted without the need for
the opening of the actuator. (Fig.2)
FPC
Fig.2
4. Easy FPC insertion
Entry chamfers at all sides of the FPC insertion slot
assure correct insertion and positioning of the FPC.
●
Completely locked
5. Accepts standard FPC thickness
0.2mm thick standard Flexible Printed Circuit (FPC) can be
used. This is the only ultra-low profile ZIF connector using
standard FPC.
6. Conductive traces on the PCB can run
under the connector
No exposed contacts on the bottom of the connector.
7. Board placement with automatic
equipment
Flat upper surface and tape and reel packaging
facilitate vacuum pick-up and placement.
Standard reel packaging contains 5000 connectors.
Fig.3
8. Halogen-free
(FH39J Series)
*As defined by IEC61249-2-21
*
Br-900ppm maximum, Cl-900ppm maximum,
Cl + Br combined-1,500ppm maximum
2015.8③
1
FH39 Series●0.3mm Pitch 1.1mm Height Top and Bottom Contact Back-Flip actuator Flexible Printed Circuit Connectors
■Product
Specifications
Current rating 0.2A
Ratings
Voltage rating 30Vrms AC
Recommended FPC
Operating
temperature range -55 to +85°C (Note 1)
Relative humidity 90% max.
Operating
(No condensation)
humidity range
Storage
-10 to +50°C (Note 2)
temperature range
Storage
Relative humidity 90% max.
humidity range
(No condensation)
Thickness: 0.2
±
0.03mm, Gold plated contact pads
Item
1.Insulation resistance
50Mø min.
Specification
100V DC
Conditions
2.Withstanding voltage No flashover or insulation breakdown
90Vrms AC / 1 minute
1mA, AC max (AC: 1kHz)
10 cycles
Frequency : 10 to 55Hz,
single amplitude of 0.75mm,
10 cycles in each of the 3 axis
Acceleration of 981m/s2, 6ms duration,
sine half-wave, 3 cycles in each of the 3 axis
96 hours at 40ç and humidity of 90 to 95%
Dec.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
3.Contact resistance
4.Durability
5.Vibration
6.Shock
7.Humidity
(Steady state)
8.Temperature cycle
9.Resistance to
soldering heat
100mø max.
* Including FPC and FFC conductor resistance
Contact resistance : 100mø max.
No damage, cracks, or parts dislocation
No electrical discontinuity of 1µs or longer
Contact resistance : 100mø max.
No damage, cracks, or parts dislocation
No electrical discontinuity of 1µs or longer
Contact resistance : 100mø max.
No damage, cracks, or parts dislocation
Contact resistance : 100mø max.
Insulation resistance : 50Mø min.
No damage, cracks, or parts dislocation
Contact resistance : 100mø max.
Insulation resistance : 50Mø min.
No damage, cracks, or parts dislocation
Temperature : -55ç➝+15ç to +35ç➝+85ç➝+15ç to +35ç
Time : 30➝ 2 to 3
➝
30➝ 2 to 3 minutes
5 cycles
No deformation of components affecting Reflow : At the recommended temperature profile
performance
Manual soldering : 350ç ± 5ç for 5 seconds
Note 1 : Includes temperature rise caused by current flow.
Note 2 : The term "storage" refers to products stored for a long period prior to mounting and use.
The operating temperature and humidity range covers the non-conducting condition of installed connectors
in storage, shipment or during transportation after board mounting.
■Materials
/ Finish
Part
Insulator
Contacts
Metal fittings
Material
LCP
PA
Phosphor bronze
Finish
Color : Beige
Color : Black
Gold plated
Pure tin reflow plated
Remarks
UL94V-0
-----------------
-----------------
■Product
Number Structure
FH 39 J - 51S - 0.3 SHW (10)
q
q
Series name : FH
w
Series No. : 39
e
Blank : Standard
A : Long actuator type
J : Halogen-free
(Flame retardance UL94V-0).
w
e
r
t
y
u
r
No. of Contacts
FH39 : 25 to 61
FH39A : 67
FH39J : 25 to 51
t
Contact pitch : 0.3mm
y
Termination type
SHW...SMT horizontal staggered row mount type
u
Plating specifications
(10)...Standard 5,000 pcs/reel
(99)...500 pcs/reel
2
FH39 Series●0.3mm Pitch 1.1mm Height Top and Bottom Contact Back-Flip actuator Flexible Printed Circuit Connectors
■
Connector Dimensions
A±0.15
0.3±0.1
0.6±0.1
B±0.1
(0.12)
Dec.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
Production LOT No.
0.6±0.1
C±0.1
B
(0.12)
(0.15)
(D)
E±0.1
(0.6)
(3.3)
B Detailed drawing
[FH39 Series]
(0.42) (FPC : t 0.2mm)
(3.85)
(2.1)
(1.55)
(0.85)
B Detailed drawing
[FH39A Series]
(0.42) (FPC : t 0.2mm)
(4.15)
(2.1)
(1.55)
(0.85)
(9
(1.85)
1.1±0.1
(1.54)
3.55±0.2
0.47±0.1
0.1±0.15
1
3.25±0.15
1
0.3±0.1
0.1±0.15
0.1
0.47±0.1
0.1±0.15
1
3.25±0.15
1
0.3±0.1
0.1±0.15
0.1
0.1
0.1
Note 1
2
3
4
: The coplanarity of each terminal lead within specified dimension is 0.1 mm Max.
: Packaged on tape and reel only. Check packaging specification.
: Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.
: After reflow, the terminal plating may change color, however this does not represent a quality issue.
All dimensions : mm
Part No.
FH39-25S-0.3SHW(10)
FH39-27S-0.3SHW(10)
FH39-29S-0.3SHW(10)
FH39-33S-0.3SHW(10)
FH39-39S-0.3SHW(10)
FH39-45S-0.3SHW(10)
FH39-51S-0.3SHW(10)
FH39-61S-0.3SHW(10)
FH39A-67S-0.3SHW(10)
FH39J-25S-0.3SHW(10)
FH39J-33S-0.3SHW(10)
FH39J-39S-0.3SHW(10)
FH39J-45S-0.3SHW(10)
FH39J-51S-0.3SHW(10)
HRS No.
580-1806-8 10
580-1805-5 10
580-1807-0 10
580-1803-0 10
580-1800-1 10
580-1802-7 10
580-1801-4 10
580-1808-3 10
580-1809-6 10
580-1815-9 10
580-1814-6 10
580-1813-3 10
580-1811-8 10
580-1812-0 10
No. of Contacts
25
27
29
33
39
45
51
61
67
25
33
39
45
51
A
9.7
10.3
10.9
12.1
13.9
15.7
17.5
20.5
22.3
9.7
12.1
13.9
15.7
17.5
B
6.6
7.2
7.8
9
10.8
12.6
14.4
17.4
19.2
6.6
9
10.8
12.6
14.4
C
7.2
7.8
8.4
9.6
11.4
13.2
15
18
19.8
7.2
9.6
11.4
13.2
15
1.1±0.1
(1.89)
Note 1 : Tape and reel packaging (5,000 pcs/reel, 500 pcs/reel).
Note 2 : Order by number of reels.
(90
˚)
0˚
)
D
7.83
8.43
9.03
10.23
12.03
13.83
15.63
18.63
20.43
7.83
10.23
12.03
13.83
15.63
E
9.15
9.75
10.35
11.55
13.35
15.15
16.95
19.95
21.75
9.15
11.55
13.35
15.15
16.95
3
FH39 Series●0.3mm Pitch 1.1mm Height Top and Bottom Contact Back-Flip actuator Flexible Printed Circuit Connectors
B
Recommended PCB mounting pattern and metal mask dimensions
(Metal mask:0.42)
B±0.05
0.3±0.03
(Metal mask:0.25)
0.6±0.05
0.5±0.05
Recommended
metal mask thickness : t=0.1
(0.1)
(0.2)
3.65MIN (Stiffner)
0.3±0.05
Dec.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
(Metal mask:0.57)
0.67±0.05
0.3±0.03
(Metal mask:0.25)
C±0.05
0.6±0.05
0.35±0.05
(Metal mask:0.35)
0.8±0.05
B
Recommended FPC Dimensions
F±0.05
0.3±0.07
0.3
+0.04
-0.03
C±0.03
0.6±0.02
0.3±0.02
0.3±0.07
1.05±0.1
2-
R0
.2
1.15±0.1
0.3±0.1
0.2±0.03
0.3
+0.04
-0.03
0.1
0.2
0.1±0.02
0.6±0.07
B±0.03
0.6±0.07
Note : Stiffener dimension should be 3.65mm min., however if it is not satisfied, X dimension should be 0.5mm or more.
All dimensions : mm
Part No.
FH39-25S-0.3SHW(10)
FH39-27S-0.3SHW(10)
FH39-29S-0.3SHW(10)
FH39-33S-0.3SHW(10)
FH39-39S-0.3SHW(10)
FH39-45S-0.3SHW(10)
FH39-51S-0.3SHW(10)
FH39-61S-0.3SHW(10)
FH39A-67S-0.3SHW(10)
FH39J-25S-0.3SHW(10)
FH39J-33S-0.3SHW(10)
FH39J-39S-0.3SHW(10)
FH39J-45S-0.3SHW(10)
FH39J-51S-0.3SHW(10)
HRS No.
580-1806-8 10
580-1805-5 10
580-1807-0 10
580-1803-0 10
580-1800-1 10
580-1802-7 10
580-1801-4 10
580-1808-3 10
580-1809-6 10
580-1815-9 10
580-1814-6 10
580-1813-3 10
580-1811-8 10
580-1812-0 10
No. of Contacts
25
27
29
33
39
45
51
61
67
25
33
39
45
51
B
6.6
7.2
7.8
9
10.8
12.6
14.4
17.4
19.2
6.6
9
10.8
12.6
14.4
C
7.2
7.8
8.4
9.6
11.4
13.2
15
18
19.8
7.2
9.6
11.4
13.2
15
F
7.8
8.4
9
10.2
12
13.8
15.6
18.6
20.4
7.8
10.2
12
13.8
15.6
4
*∞(1)
(Uncovered area)
2.25±0.1
2.1±0.1
2.65±0.3
0.1±0.05
(Metal mask:1)
2.48±0.05
(3.65)
1±0.05
FH39 Series●0.3mm Pitch 1.1mm Height Top and Bottom Contact Back-Flip actuator Flexible Printed Circuit Connectors
B
Recommended FPC construction
1. Using Single-sided FPC
FPC : Flexible Printed Circuit
Material Name
Covering film layer
Cover adhesive
Surface treatment
Copper foil
Base adhesive
Base film
Reinforcement material adhesive
Polyimide
Material
1 mil thick.
Material Thickness(µm)
(25)
(25)
3
35
25
25
40
75
203
1 mil thick
3 mil thick
0.2µm thick gold plated over 1 to 5µm
nickel underplating
Cu 1oz
Thermosetting adhesive
Polyimide
Polyimide
Total
Thermosetting adhesive
Dec.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
Stiffener
2. Using Double-sided FPC
FPC : Flexible Printed Circuit
Material Name
Covering film layer
Cover adhesive
Surface treatment
Through-hole copper
Copper foil
Base adhesive
Base film
Base adhesive
Copper foil
Cover adhesive
Covering film layer
Reinforcement material adhesive
Stiffener
0.2µm thick gold plated over 1 to 5µm
nickel underplating
Material
Polyimide
1 mil thick.
Material Thickness (µm)
(25)
(25)
3
15
18
18
25
18
(18)
25
25
25
25
197
Cu
Cu 1/2oz
Thermosetting adhesive
Polyimide
Cu 1/2oz
Thermosetting adhesive
Polyimide
Polyimide
Total
1 mil thick.
3 mil thick
Thermosetting adhesive
1 mil thick
Thermosetting adhesive
* To prevent release of the FPC due to its bending, use of the double sided FPC with copper foil on the back side is not recommended.
3. Precautions
1 : This specification is a recommendation for the construction of the FH39 Series FPC (t=0.2±0.03).
2 : For details about the construction, please contact the FPC manufacturers.
B
Packaging Specification
●
Embossed Carrier Tape Dimensions (Tape width to 24mm max.)
.1
+0 0
(0.3)
Ø1
.5
J±0.1
1.75±0.1
(2.1 : FH39 series)
(2.4 : FH39A series)
4±0.1
2±0.15
8±0.1
Flat surface,
for placement with
automatic equipment.
(4.65)
Unreeling direction
(1.85)
G±0.3
(K)
5
京公网安备 11010802033920号
EEWORLD
