• All Single-Cycle Instructions except for Program
Branches, which are Two-Cycle
• 12-Bit Wide Instructions
• 2-Level Deep Hardware Stack
• Direct, Indirect and Relative Addressing modes
for Data and Instructions
• 8-Bit Wide Data Path
• Eight Special Function Hardware Registers
• Operating Speed:
- 4 MHz internal clock
- 1
s
instruction cycle
Peripheral Features (PIC10F200/202):
• Four I/O Pins:
- Three I/O pins with individual direction control
- One input-only pin
- High current sink/source for direct LED drive
- Wake-on-change
- Weak pull-ups
• 8-Bit Real-Time Clock/Counter (TMR0) with 8-Bit
Programmable Prescaler
Special Microcontroller Features:
• 4 MHz Precision Internal Oscillator:
- Factory calibrated to ±1%
• In-Circuit Serial Programming™ (ICSP™)
• In-Circuit Debugging (ICD) Support
• Power-on Reset (POR)
• Device Reset Timer (DRT)
• Watchdog Timer (WDT) with Dedicated On-Chip
RC Oscillator for Reliable Operation
• Programmable Code Protection
• Multiplexed MCLR Input Pin
• Internal Weak Pull-ups on I/O Pins
• Power-Saving Sleep mode
• Wake-up from Sleep on Pin Change
Peripheral Features (PIC10F204/206):
• Four I/O Pins:
- Three I/O pins with individual direction control
- One input-only pin
- High current sink/source for direct LED drive
- Wake-on-change
- Weak pull-ups
• 8-Bit Real-Time Clock/Counter (TMR0) with 8-Bit
Programmable Prescaler
• One Comparator:
- Internal absolute voltage reference
- Both comparator inputs visible externally
- Comparator output visible externally
TABLE 1:
Device
PIC10F20X MEMORY AND FEATURES
Program Memory
Flash (words)
Data Memory
I/O
SRAM (bytes)
16
24
16
24
4
4
4
4
256
512
256
512
Timers
8-bit
1
1
1
1
Comparator
0
0
1
1
PIC10F200
PIC10F202
PIC10F204
PIC10F206
2004-2014 Microchip Technology Inc.
DS40001239F-page 1
PIC10F200/202/204/206
Pin Diagrams
FIGURE 1:
6-PIN SOT-23
PIC10F200/202
GP0/ICSPDAT
V
SS
GP1/ICSPCLK
1
2
3
6
5
4
GP3/MCLR/V
PP
V
DD
GP2/T0CKI/FOSC4
V
SS
GP1/ICSPCLK/CIN-
2
3
PIC10F204/206
GP0/ICSPDAT/CIN+
1
6
5
4
GP3/MCLR/V
PP
V
DD
GP2/T0CKI/COUT/FOSC4
FIGURE 2:
8-PIN PDIP
PIC10F200/202
N/C
V
DD
GP2/T0CKI/FOSC4
GP1/ICSPCLK
1
2
3
4
8
7
6
5
GP3/MCLR/V
PP
V
SS
N/C
GP0/ICSPDAT
V
DD
GP2/T0CKI/COUT/FOSC4
GP1/ICSPCLK/CIN-
2
3
4
PIC10F204/206
N/C
1
8
7
6
5
GP3/MCLR/V
PP
V
SS
N/C
GP0/ICSPDAT/CIN+
FIGURE 3:
8-PIN DFN
N/C
V
DD
GP2/T0CKI/FOSC4
GP1/ICSPCLK
1
2
3
4
PIC10F200/202
8
7
6
5
GP3/MCLR/V
PP
V
SS
N/C
GP0/ICSPDAT
N/C
V
DD
GP2/T0CKI/COUT/FOSC4
GP1/ICSPCLK/CIN-
1
2
3
4
PIC10F204/206
8
7
6
5
GP3/MCLR/V
PP
V
SS
N/C
GP0/ICSPDAT/CIN+
DS40001239F-page 2
2004-2014 Microchip Technology Inc.
PIC10F200/202/204/206
Table of Contents
1.0 General Description...................................................................................................................................................................... 4
5.0 I/O Port ....................................................................................................................................................................................... 20
6.0 Timer0 Module and TMR0 Register (PIC10F200/202)............................................................................................................... 23
7.0 Timer0 Module and TMR0 Register (PIC10F204/206)............................................................................................................... 27
9.0 Special Features of the CPU...................................................................................................................................................... 35
10.0 Instruction Set Summary ............................................................................................................................................................ 45
11.0 Development Support................................................................................................................................................................. 53
13.0 DC and AC Characteristics Graphs and Tables......................................................................................................................... 67
The Microchip Web Site ....................................................................................................................................................................... 85
Customer Change Notification Service ................................................................................................................................................ 85
Customer Support ................................................................................................................................................................................ 85
Product Identification System .............................................................................................................................................................. 86
TO OUR VALUED CUSTOMERS
It is our intention to provide our valued customers with the best documentation possible to ensure successful use of your Microchip
products. To this end, we will continue to improve our publications to better suit your needs. Our publications will be refined and
enhanced as new volumes and updates are introduced.
If you have any questions or comments regarding this publication, please contact the Marketing Communications Department via
E-mail at
docerrors@microchip.com.
We welcome your feedback.
Most Current Data Sheet
To obtain the most up-to-date version of this data sheet, please register at our Worldwide Web site at:
http://www.microchip.com
You can determine the version of a data sheet by examining its literature number found on the bottom outside corner of any page.
The last character of the literature number is the version number, (e.g., DS30000000A is version A of document DS30000000).
Errata
An errata sheet, describing minor operational differences from the data sheet and recommended workarounds, may exist for current
devices. As device/documentation issues become known to us, we will publish an errata sheet. The errata will specify the revision
of silicon and revision of document to which it applies.
To determine if an errata sheet exists for a particular device, please check with one of the following:
• Microchip’s Worldwide Web site;
http://www.microchip.com
• Your local Microchip sales office (see last page)
When contacting a sales office, please specify which device, revision of silicon and data sheet (include literature number) you are
using.
Customer Notification System
Register on our web site at
www.microchip.com
to receive the most current information on all of our products.
2004-2014 Microchip Technology Inc.
DS40001239F-page 3
PIC10F200/202/204/206
1.0
GENERAL DESCRIPTION
1.1
Applications
The PIC10F200/202/204/206 devices from Microchip
Technology are low-cost, high-performance, 8-bit,
fully-static, Flash-based CMOS microcontrollers. They
employ a RISC architecture with only 33 single-word/
single-cycle instructions. All instructions are single
cycle (1
s)
except for program branches, which take
two cycles. The PIC10F200/202/204/206 devices
deliver performance in an order of magnitude higher
than their competitors in the same price category. The
12-bit wide instructions are highly symmetrical,
resulting in a typical 2:1 code compression over other
8-bit microcontrollers in its class. The easy-to-use and
easy to remember instruction set reduces development
This Samsung speed dome camera is widely used in China. It cannot be said that it has excellent performance, powerful functions, and clear images. When it is disassembled, it is well made and has good...
Introduction to FPGA peripheral circuits (Intel official tutorial) : https://training.eeworld.com.cn/course/5562The necessary peripheral circuits required for FPGA operation are explained in detail, i...
[size=4][b]Abstract[/b][/size] [size=4]Bluetooth technology has evolved from a way to connect PC peripherals to a powerful solution for industrial and domestic IoT connectivity. But Bluetooth is only ...
Since the Fujitsu development board DIY activity was launched, in order to cooperate with the group's activities, I personally chose the design content of the switching power supply. According to ever...
MPLAB-ICD2 is a powerful, low-cost, high-speed development tool that is fully compatible with Microchip's online debugger MPLAB-ICD2. It utilizes the self-read and write functions of the program area ...
UHF and HF are both general technology categories, but each category has independent supporting protocols. HF is more consistent in the 13.56MHz frequency band, although there are many internation...[Details]
Magnetic resonance imaging (MRI) systems can take high-resolution cross-sectional perspective images of the human body, providing very useful information for medical diagnosis. The radio frequency pro...[Details]
TD-SCDMA terminal conformance test includes three types of tests: RF index test (reference standard: 3GPPTS34.122), protocol signaling test (reference standard: 3GPPTS34.123) and other tests (refer...[Details]
AD8302
Introduction
AD8302 is a monolithic integrated circuit for RF/IF amplitude and phase measurement from ADI. It is mainly composed of two precisely matched broadband logarithmic det...[Details]
Many MEMS devices, such as accelerometers and mechanical resonance devices, require a vacuum environment to realize their designed functions. However, verifying whether the package cavity has reach...[Details]
introduction
In engineering practice, ultrasonic waves are often used to measure distances because of their strong directivity, slow energy consumption, and long propagation distance in th...[Details]
MIPS Technologies Inc. has introduced the CI10084tg, a next-generation global positioning system (GPS) RF tuner IP solution. The silicon-proven, integrated low-noise RF front end for GPS receivers...[Details]
Abstract:
This paper
introduces a data acquisition system based on USB and DSP, which takes advantage of the high-speed transmission characteristics of USB2.0. The overall structure of the ...[Details]
Industrial control
often requires multi-channel fault detection and multi-channel command control (this multi-task setting is very common). A single CPU chip is difficult to directly complete ...[Details]
1 Introduction
Bandgap reference sources are widely used in various integrated circuits. With the increasing development of modern integrated circuits, bandgap reference sources play ...[Details]
With the development of science and technology, the improvement of living standards and the acceleration of the pace of modern cities, people are increasingly pursuing more convenient, practical an...[Details]
Preface
Today, automotive electronic devices account for a large proportion of the entire vehicle. Although these electronic modules bring comfort and safety to car users, at the same time...[Details]
1 Introduction
DC regulated power supplies have been widely used in many industrial fields. In industrial production (such as electric welding, electroplating or DC motor speed regulation,...[Details]
Reverse osmosis is a membrane separation technology. The pore size of the reverse osmosis membrane is basically the same as that of water molecules. Only particles of similar size to water molecules c...[Details]
As a new generation of video coding and decoding technology, H.264 has excellent compression performance compared with traditional MPEG-2, enabling it to achieve higher-quality video transmission u...[Details]
Industrial Control Electronics
京公网安备 11010802033920号
EEWORLD
