The work designed this time has the following innovative points: 1. The robot is deformable, and the robot can transform into a six-legged crawling robot and a spherical rolling robot through the conversion of the mechanical structure; 2. The robot has inertial navigation control, and the robot crawling in the six-legged form has greater capabilities. High control accuracy index; 3. The work draws on the advantages of Lego building block toys and the shortcomings of existing graphical programming toys and traditional remote control toys. The team members designed a programming building block to materialize programming and turn robot programming into a Building blocks greatly reduce the programming threshold.
This design uses ST's SensorTile development kit and STM32 microcontroller. The completed robot system consists of a controller module, inertial navigation module, wireless remote control, Bluetooth communication module, 2.4G wireless communication module, servo motor, PWM module, and OLED module. It consists of eleven parts, Android APP, system power module, and spherical mechanical structure. See the work description for details.
http://en.eeworld.com/bbs/thread-527902-1-1.html
In daily life, knocking on the door is the action of knocking on the door panel to make it vibrate and make a sound. I designed an acceleration sensor (also called accelerometer) attached to the back
cruelfoxonsemi and Avnet IoT Innovation Design Competition
The power supply in the circuit is 12V DC, 220UF capacitor, the discharge is not complete after power off, and the signal is disordered when power on again within a short period of time. Is there any
[font=sans-serif][b]Analysis of the causes of boot failure[/b][/font] [font=sans-serif](1) Link command file (.cmd) file[/font] [font=sans-serif]The link command file defines the parameters of the lin
Dear experts: I am a newbie. Recently, I used a single-chip microcomputer to do an experiment on PWM DC motor speed regulation. I used the incremental PID control algorithm. I have a question that I d
Is this board for learning embedded systems? What is the difference between it and the commonly used ARM7, ARM9 and other learning boards? I am a novice, and I hope seniors can give me some advice!