The course uses "Robotics: Modeling, Control and Vision" as the reference book and is divided into three parts: modeling, control and vision. Chapter 1 is an overview, introducing the connotation, applications and research directions of robotics. The modeling part includes Chapters 2-7, which systematically introduces the robot mechanism, rigid body pose description and homogeneous transformation, rigid body velocity and static force, manipulator kinematics, Jacobian matrix and manipulator dynamics. The control part includes Chapters 8-13, which introduce trajectory generation, trajectory control, and force control.
When compiling wince, after clicking sysgen, it fails and an error appears in the BSP. Do I need to re-SYSGEN or just build the error code and then make it?
This book is really good, but chapters 6 to 24 are not available. Has anyone found it online? If you don't want to buy the paper version, friends, please share it with me. I would be very grateful!
I wrote a small program according to the instructions, and then packaged it. The package is as shown below.I want to copy it to another computer to run it, but when I copy it, I find that it is a comp
This article introduces some technical indicators that are sufficient to show the performance of a crystal oscillator. Understanding the meaning of these indicators will help communication design engi
[i=s]This post was last edited by Corethink on 2014-9-14 23:41[/i] [align=left]Corethink and EEWorld have launched a free development board giveaway event, which will start on September 1, 2014. The e
My hardware is PXA270, which is connected to 64MBYTE FLASH P33 through 16-bit data bus, and the address bus is 26-bit. P33 is composed of two 32M flash. In the program, the addresses of the upper and