[code]if(Rc_C.ARMED) LED_ON; //"LED_ON is a macro: #define LED_ON GPIO_ResetBits(GPIOB, GPIO_Pin_8);", LED_OFF is alsoelseLED_OFF;[/code]Such a common statement actually reported an error, which made
There is no special timing requirement. HPI interface is a peripheral device of 2407, directly interfaced. DSP is used in the circuit. Sometimes when the reset signal is low, the voltage is also withi
Fixed CHANNEL, fixed PANID . Coordinator 5. The router has an antenna. The distance is too far, so I removed the antenna for testing. I found that the coordinator and the router should be very close w
Zigbee module parameters?Misty and mysterious?Standard: DC 3.3V , Range: 2.6V-3.6VTemperature range-40 ℃~85 ℃Serial port rate38400bps (default), can be set to 9600bps, 19200bps, 38400bps, 57600bps, 11