I am drawing in Altium Designer. I put Part A of one amplifier on the upper left and Part B on the lower left (red frame). I put Part A of another amplifier on the upper right and Part B on the lower
The signal generator uses ICL8038 to realize the frequency sweep signal, and uses AD0809 to collect the signal and calculate the average phase value and the peak frequency value. I need a program for
I ported u-boot-1.1.6 to mini2440 according to smdk2410. After booting, only the following message appears. The kernel loading failed. What is the reason? NAND read: device 0 offset 0x50000, size 0x20
I have some questions about power management. I would like to ask you: 1. I set the time when the system enters useridle, systemidle and suspend to 0, and never in the control panel. But the system st
1. Limited secondary filtering /* The A value can be adjusted according to the actual situation. value is a valid value, and new_value is the current sampling value. The filtering program returns a va
TMS320C6713B is an upgraded version of TMS320C6713, with Silicon Revision upgraded to 2.0. The difference between the two is noted in the "spra851h" document. See the link: http://www.ti.com/lit/an/sp