I have written a four-bit unsigned adder in Verilog. The simulation of the test signal is fine, but the simulation of the main program cannot be simulated. I don't know if it is a problem with the cal
PrefaceSince 2003, the enthusiasm for learning and applying RTOS for microcontrollers has been rising. In 2003, before leaving campus, during the months of SARS, I bought a copy of Shao Beibei's "UCOS
Hello everyone,after soldering my PCB, the chip power supply is not connected to +3.3V, and the JTAG port is supplied with 3.3V power, and thenconnected with ST-Linker (just soldered board), but it is
ARM (Advanced RISC Machines) is a well-known company in the microprocessor industry. It has designed a large number of high-performance, low-cost, low-energy RISC processors, related technologies and
I use GPIO to simulate IIC driver. After two days of work, I still can't succeed. I suspect that the delay is not accurate. I want to ask how 2440 determines the time to execute a C language instructi
The 51 MCU is a basic entry-level MCU and the most widely used one. It should be noted that the 51 series MCU generally does not have self-programming capabilities.
The US22310B ultrasonic measurement
FPGA/CPLD
京公网安备 11010802033920号
