msp430f4152, this initialization cannot succeed, do you know where the problem is? Attached is the circuit diagram near the R33 pin. void InitLCD(void) { //Setup Sx PIN P5SEL = 0xff; //COM0 ~ COM1, +
I took advantage of the weekend to debug the experiment of communicating between the Erha sensor and the serial assistant using CH340. During the experiment, I found that the baud rate can only be set
After learning how to port the 8962 file system, let's make a detailed summary of the porting steps.
Because in the process of learning SD file system transplantation, the communication mode of SD car
The basic principle is to use the 555 timer to form an oscillator and use the 51 microcontroller's timer for counting. Then I don't understand the timer part in the code. I would like to ask for help.
Chip introduction: The ADS8331 is a low-power, 16-bit, 500k samples-per-second (SPS) analog-to-digital converter (ADC) with a unipolar, 4-to-1 multiplexer (mux) input. The device includes a 16-bit cap