• Duration:27 minutes and 27 seconds
  • Date:2014/10/11
  • Uploader:chenyy
Introduction
Usually switching power supplies are considered to be part of analog circuits. Although linear regulated power supplies are analog circuits, switching power supplies themselves are not analog circuits. Why? Please see detailed explanation.
Unfold ↓

You Might Like

Recommended Posts

My CC2650 development board has also arrived
Today I received the CC2650 LaunchPad and BoosterPack that I ordered last week. I haven’t had time to play with them these days, so I’ll show them off first and try them out when I have some free time
dcexpert TI Technology Forum
Key Differences Between CircuitPython and MicroPython
Although CircuitPython was forked from micropython, the differences between the two have become more and more obvious as they continue to develop. The main differences between them are:CircuitPythonNa
dcexpert MicroPython Open Source section
Strange! Please help the moderator with the I2C clock problem
I encountered a problem when using I2C. I used an 8M crystal, SYSTEM CLOCK=72M, PCLK1=36M.When I2C was used at 400K, it did not work properly. The communication read and write died after a few times.
hjklhu stm32/stm8
Looking for a second-hand 1150-pin CPU, price negotiable
[i=s]This post was last edited by DIAG on 2017-12-4 22:17[/i] As the title says, I am looking for a second-hand 1150-pin CPU. The price is negotiable. I have an ASUS B85M-E motherboard. I have changed
DIAG Buy&Sell
Signal Attenuator Principle and Design
An attenuator is a circuit used to introduce a predetermined attenuation within a specified frequency range. It is generally indicated by the decibel number of the introduced attenuation and the numbe
bqgup Creative Market
Audio acquisition system based on FPGA_attached physical picture
Audio acquisition system based on FPGA_attached with actual pictures I am now busy making some audio acquisition stuff, hope you can give me some advice and learn from each other. The platform I made
nddz Embedded System

推荐文章

如何为ADAS设计更好的大电流开关电源 2025年01月08日
高级驾驶辅助系统 (ADAS) 在当今的汽车中越来越突出。它们通过最大限度地减少人为错误来提高驾驶员和道路的安全性。早期的 ADAS 仅包含一个自动驾驶辅助功能,例如使用一个雷达传感器的自适应巡航控制。现在,更多的 ADAS 功能正在被添加到汽车中,例如自动紧急停车、盲点监控、车辆/行人警告和避让、车道偏离警告和辅助等。 由于传感器和摄像头数量的增加、强大的实时数据处理和...
GD32E503R SMPS(PFC+LLC)开关电源解决方案 2024年12月06日
1. 方案简介 PFC全称Power Factor Correction,中文译为功率因素校正电路,是一种提高电路功率因素的电路,常用于100W以上的电器中。PFC电路可以使电流波形跟随电压波形,提高电路的有功功率,抑制电流谐波。 LLC谐振电路是一种转换效率较高高的DC/DC电路,因其电路中包含谐振电感Lr,励磁电感Lm和谐振电容Cr,故而称为LLC电路。LLC电路可以...
推挽式开关电源变压器初级线圈匝数的计算 2024年10月22日
推挽式开关电源使用的开关变压器有两个初级线圈,它们都属于励磁线圈,但流过两个线圈的电流所产生的磁力线方向正好相反,因此,推挽式开关电源变压器属于双激式开关电源变压器;另外,推挽式开关电源变压器的次级线圈会同时被两个初级线圈所产生的磁场感应,因此,变压器的次级线圈同时存在正、反激电压输出;推挽式开关电源有多种工作模式,如:交流输出、整流输出、直流稳压输出,等工作模式,各种工作模...
推挽式开关电源具有哪些优点 2024年10月22日
推挽式开关电源是一种常见的开关电源拓扑结构,其主要由两个开关管组成,分别是P沟道MOS管和N沟道MOS管。在这两个开关管中,谁先起振取决于电路的工作条件和电路特性。 推挽式开关电源是一种常见的电源拓扑结构,广泛应用于各种电子设备中。在推挽式开关电源中,MOS管是核心的功率器件之一,其性能直接影响到整个电源系统的稳定性和可靠性。 推挽式开关电源是一种双端反激式电源,其工...

Recommended Content

Circuit

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号