ghaytweyhtoo

NCP58302DSADGEVB: Adjustable VLDO Regulator Evaluation Board

Overview

The NCP58300 series are high precision, very low dropout VLDO), low ground current positive voltage regulators that are capable of providing an output current in excess of 3.0 A with a typical dropout voltage lower than 370 mV at 3.0 A load current. The devices are stable with tantalum output capacitors. This series consists initially of an Adjustable output voltage version, with fixed voltage versions planned in the future.The NCP58300 series can withstand up to 18 V max input voltage. Internal protection features consist of output current limiting, built-inthermal shutdown and reverse output current protection. Logic level enable and error flag pins are available on the 5-pin version.

Design Files

All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.

It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.

Hot

Technical Resources More

Search Datasheet?

Supported by EEWorld Datasheet

Technical Videos More

Forum More

Update:2025-06-30 04:25:36

Chongqing University of Posts and Telecommunications 2006 Postgraduate Entrance Examination Reexamination "Low Frequency Electronic Circuits" Examination Outline
1. Understand the conductive characteristics of semiconductor materials and be familiar with the external characteristics and main performance characteristics of semiconductor components (crystal diod
Chatting with friends born in the 80s
A large part of the people who play here are probably people like me who were born in the 1980s. In Internet lingo, we call them "post-80s". This group of people has been labeled with many labels. If
Urgently recruiting electronic label engineers
Urgently recruiting electronic tag engineers. Specific requirements: 1. College degree or above, with two years of relevant work experience. 1. Understand the direction of the RFID industry, familiar
I have a question about SPI program!
SPI0 is the master and SPI1 is the slave void SPI1_Isr (void) {RcvData = SSP1DR; /* Receive data */RcvFlag = 0x01; /* Receive new data */SSP1ICR = 0x03; /* Clear flag */ } uint8 SPI0_SendData (uint8 d
Small Problem
Does this mean that I didn't connect it? Can I just drill a hole next to it and then lay the copper? I can just poke it in the second one.
SinlinxA33 Development Board Linux Interrupt Programming 4-Final Code (1)
Key driver code: [code]#include #include#include #include #include #include #include #include#include#define DEVICE_BUTTON"mybtn" #define BTN_MAJOR255 static char keybuf[] = {"0"}; static struct miscd

Datasheet More

Circuits More