3rNb2v

SnailCube

Overview

This is a development box that integrates an ESP32 development board, breadboard, and specific capacitors and resistors.

Thanks to LCSC for reviewing it. The panel PCB uses high-definition silkscreen printing, otherwise the effect would be much worse.

Shell.zip

BOM_SnailCube.xlsx

95392

The 15th Blue Bridge Cup EDA Competition Mock Test 2

Mock Exam Question 2 for the 15th Blue Bridge Cup EDA Competition (Provided by JLCPCB EDA, for reference only)

The second mock test for the 15th Blue Bridge Cup EDA competition is provided for participants to use for training and study.

The 15th Blue Bridge Cup EDA Competition Mock Test 2 (provided by JLCPCB EDA).zip

PDF_The 15th Blue Bridge Cup EDA Competition Mock Test II.zip

Altium_15th Blue Bridge Cup EDA Competition Mock Test 2.zip

PADS_15th Blue Bridge Cup EDA Competition Mock Test 2.zip

BOM_The 15th Blue Bridge Cup EDA Competition Mock Test II.xlsx

95393

electronic

Design Files

All reference designs on this site are sourced from major semiconductor manufacturers or collected online for learning and research. The copyright belongs to the semiconductor manufacturer or the original author. If you believe that the reference design of this site infringes upon your relevant rights and interests, please send us a rights notice. As a neutral platform service provider, we will take measures to delete the relevant content in accordance with relevant laws after receiving the relevant notice from the rights holder. Please send relevant notifications to email: bbs_service@eeworld.com.cn.

It is your responsibility to test the circuit yourself and determine its suitability for you. EEWorld will not be liable for direct, indirect, special, incidental, consequential or punitive damages arising from any cause or anything connected to any reference design used.

Hot

Technical Resources More

Search Datasheet?

Supported by EEWorld Datasheet

Technical Videos More

Forum More

Update:2026-03-26 20:04:12

There are messy lines on the wince 5.0 screen (picture attached), please help me
I'm using the 9263 version of ateml, and now I want to change it to Mitsubishi's AA065VB01 640*480 display. I've been trying for a week, but I still can't adjust it. I feel like I'm going to collapse.
[NXP Rapid IoT Review] +3. Rapid IoT Studio online IDE Test 1 - BLE control indicator
[i=s]This post was last edited by weiwei4 on 2019-1-21 11:49[/i] Rapid IoT Studio online IDE This is quite easy to use. You can program without typing code. How to start? Why not turn on a lamp first!
How does wavecom use the at command to operate the stk menu
As the title says, because of the project needs, I urgently need examples in this regard (I must have examples, I already have a lot of information, but none of the examples can be adjusted), I hope a
PIC16C7X A/D Converter Control Scheme
PIC16C7X A/D converter control scheme detailed introduction
Please advise on the frequency setting of FLASH timing control generator
I'm writing a FLASH driver recently and encountered the following problem. I'd like to ask for your help. jelline@126.com(1) Clock frequencyThe FLASH timing generator frequency is required to be betwe
【Date with Spring】Beautiful Scenery of Suzhou
I went on a business trip to Jiangnan a while ago, and took some time to visit Suzhou. Unfortunately, my camera was not very good, and I couldn’t pick out many satisfactory pictures. I’ll post them he

Datasheet More

Circuits More