This valve controller system uses SB0800 octal valve controller IC with MCU and two power MOSFETs. The system can drive proportional and digital valves as well as system pumps. Monitoring and protection features protect the system from hazardous events such as short circuits, overcurrent or overvoltage, and other abnormal conditions.
RDS12GHVAC is a reference design based on the 16-bit S12G ultra-reliable microcontroller. RDS12GHVAC consists of a central control board with a human-machine interface (HMI), a motor control board, a damper and a blower motor. It is used to realize the temperature, light, and humidity of automotive HVAC. and air quality sensing interface and configurable automatic climate control software algorithms to effectively control vehicle climate.
OrangeBox is a comprehensive development platform that provides a wide range of secure wireless connectivity to develop automotive solutions that meet the requirements of connected domain or zone controllers. OrangeBox integrates a scalable i.MX 8XLite applications processor, S32K security co-processor and the wireless connectivity required to enable secure automotive access, V2X, Wi-Fi, Bluetooth® LE, UWB and cellular connectivity between the vehicle and the outside world In a safe and secure manner.
The NXP Zone Control Proof of Concept (POC) platform is a zone development ecosystem for OEMs' POC efforts. It prototypes a vehicle-level zone architecture using an Ethernet backbone, addressing technical challenges with potential solutions and implementing key functions required for the zone architecture, including PDU gateways, PDU tunneling, DDS applications, TSN capabilities and performance benchmarking.
This smart battery charger is based on NXP's LPC860 cost-effective MCU, which provides customers with a reference design for smart battery charging applications and can be used for mobile devices such as handheld printers and walkie-talkies.
The PD150 is a compact 150MHz differential oscilloscope probe for engineers on a budget and advanced hobbyists. It has advanced features such as automatic DC offset voltage zeroing and low-frequency common-mode rejection tuning. It will also provide complete documentation in the spirit of old-school "anchor" test equipment, detailing its working principles in addition to typical instructions and specifications.
This open source has a complete host computer, slave computer and schematic diagram, as well as a detailed design paper.
This is a simple USB sniffer based on the Raspberry Pi RP2040. It supports low speed and full speed modes. The firmware presents itself as a virtual COM port (VCP), so no additional software is required and it is compatible with all operating systems.
Flirting with jumper caps is a common practice on most boards, but not this board, which is designed to replace all those wires with an analog switch matrix. All one has to do is plug in the device and make a virtual connection on the accompanying GUI. There are also many built-in functions such as DAC and ADC, and the circuit can be switched under the prototype as needed. It also has some LEDs embedded in the breadboard area that light up and provide visual cues that they are connected to each other.
This reference design describes how to use TI's wireless M-Bus stack with the CC1310 and CC1350 wireless MCUs and integrate them into smart meter or data collector products. The software stack is compatible with the Open Metering System (OMS) v3.0.1 specification. EN13757-1 to EN13757-7 are European meter reading standards, including wired and wireless metering buses (M-Bus); these are very popular in ultra-low power metering and sub-metering applications. The design provides ready-to-use binary images for any wireless M-Bus S, T or C mode at 868 MHz, with unidirectional (instrumentation) or bidirectional configuration (instrumentation and datalogger). Multiple precompiled binary images are provided covering metering applications including but not limited to heat cost allocators (HCA), gas, water and heat meters, or electronic meters with external host MCUs.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
