The TIDA-01559 is a Human Machine Interface (HMI) reference design that uses the MSP430FR2522 MCU and LP5569 device, and can achieve extremely low standby power consumption and offload the resources of the MCU with LED engine control. This solution can be used anywhere a low-power consuming HMI with good EMI performance and moisture immunity is required. Examples are a kitchen exhaust hood, cooker top, and refrigerator.
6.6 W non-isolated buck converter for small appliances using LinkSwitch-TN2 (LNK3207D)
To meet the increasing demands for isolated Power over Ethernet (PoE) power solutions, Maxim’s power supply experts have developed
The MAXREFDES1244 is a No-Opto Flyback converter that delivers up to 1.2A at 5V from a 18V to 54V supply voltage. It is designed for industrial equipment that needs isolated voltage from wide input supply voltage.
Integrate sensors, radios and other peripheral components into embedded designs that work easily with the Tower Plug-in Carrier Module (TWR-TWRPI-BD).
This document details the MAXREFDES119# subsystem reference design, a 17V to 36V input, 5V output, no-opto flyback isolated power supply capable of 9W. Design files and test results are included. Hardware is available for purchase.
This application note shows a reference design using the MAX15026 low-cost, high-efficiency synchronous buck converter in an auxiliary power supply for LCD TVs or set-top boxes. This reference design generates a 5V, 5A power supply from a wide, 6.5V to 24V input voltage range.
The TIDA-00486 TI design uses Texas Instruments' SimpleLink Wi-Fi CC3200 on-chip Internet wireless MCU module to create a data bridge between an RS-485 network and a Wi-Fi network. The ISO15 transceiver provides an isolated RS-485 interface with electrical isolation up to 2500 VRMS. The LM5160 Fly-Buck™ power supply provides both isolated and non-isolated 3.3V outputs for both parts of the circuit. This design can be powered by AC or DC supplies up to 30VRMS or 48V peak. A version of this design with a non-isolated RS-485 interface is included in TIDA-00485.
The MAX17574, high-efficiency, high-voltage, synchronous step-down DC-DC converter with integrated MOSFETs operates over a 4.5V to 60V input. The converter can deliver up to 3A current.
This document details the MAXREFDES120# subsystem reference design, a 17V to 36V input, 5V output, no-opto flyback isolated power supply capable of 12.5W. Design files and test results are included. Hardware is available for purchase.
TIDA-00675 reduces power consumption by using load switches to dynamically turn loads on/off. The design guide explains how switching frequency, duty cycle, and the use of discharge resistors affect power dissipation.
This reference design shows how to use a MAX15005 automotive power-supply controller as a boost circuit to maintain a constant voltage during an automotive cold-crank condition.
This reference design details an automotive daytime running light (DRL) and position light solution. The TPS92830-Q1 linear LED controller used in this design is powered directly from the car battery, thus allowing you to use the same LED for both functions. This reference design also has good EMC performance and provides comprehensive protection and diagnostics.
KITPF0100EPEVBE is targeted at standalone environments in NXPEvaluation board for the MMPF0100 power management integrated circuit (PMIC).
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
