Stepper motor driver expansion board for STM32 Nucleo, based on L6474
The new T1023 WLAN access point system is based on the QorIQ T1023 and is a semi-turnkey platform primarily designed for fast shipping to 802.11ac customers. This WLAN reference design board, jointly developed by NXP and Alpha Networks, can be quickly put into production with the latest 802.11ac capabilities, thus accelerating time to market. Not only does the board feature 2.4GHz and 5Ghz radios, it also comes with a PCIe slot for a potential 60GHz radio.
The overall idea of the project is to use the GD32E231 development board as the main control unit, use the LCD5110 display screen and two user buttons as the human-computer interaction module, use the infrared probe for monitoring, and use the AT24C02flash chip to save and record the triggering time of the monitoring alarm, so that Initial implementation of basic intelligent functions.
STM32 Power shield and Nucleo expansion board (UM2243) for power consumption measurement
The board of this design is intended to sit between the fundamental and harmonic boards and monitor the SPI data running to the display. Onboard ECP5 will mirror the display and output a copy to a digital monitor.
The i.MX RT1060 EVK is an evaluation kit for the i.MX RT1060 crossover processor, which uses NXP's advanced Arm Cortex-M7 core implementation.
LED brightness dimming changes the brightness by changing the LED's on-time. The longer the LED's on-time per unit time, the higher the brightness. In practical applications, it is controlled by changing the duty cycle. It can be seen from the light efficiency conversion characteristics of LED that when the same duty cycle is increased, the brightness increases more at low gray values than at high gray values. At the same time, at low gray values, every time the gray value changes by one In small units, the value of the light intensity increase rate D is relatively large. As the brightness increases, the light intensity increase rate D decreases, and the human eye's sensitivity to light changes also decreases. That is to say, the level jump is very obvious at low brightness. The brightness jump is particularly sensitive to human vision and cannot achieve a flexible effect of gradually brightening or dimming. The principle of smooth dimming is to improve the dimming effect of LED by changing the linearity of LED dimming curve.
Connect to a 5" LCD paired with a Sipeed Tang Nano. This is an 800x480 LCD with RGB888 connections. All 8 bits of each channel are connected via SYZYGY connectors.
STM32 Nucleo-64 development board using STM32F334R8 MCU, supporting Arduino and ST morpho connections
Using only one ESP32 chip, you can enjoy the nostalgic gaming experience brought by Atari 8-bit, NES and SMS game consoles on your TV.
Small Engine EFI (Electronic Fuel Injection) Reference Design for SPC572L MCU and L9177A Driver
The 56F8013 Demonstration Board is an evaluation module board that includes a NXP 56F8013 digital signal controller (DSC).
STM32 Nucleo-32 development board using STM32F303K8 MCU, supporting Arduino connection
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
