OM13511: I²C-bus RTC PCF8523 Demonstration Board

OM11064-OM13561: Evaluation/Demonstration Board for PTN3460/3460I

The PTN3460/3460I demonstration board provides a simple interface between a host system with a DisplayPort connector and an LCD panel with LVDS signal input.

Schematic PCB

SJA1105Q-EVB: Ethernet switch and PHY evaluation board.

The SJA1105Q-EVB is an evaluation board for the SJA1105P/Q/R/S Automotive Ethernet switchs series and TJA1102 dual 100BASE-T1 PHY.

OM27160: Development kit for the PN7160 plug-and-play NFC controller

OM14510-SJA1105TJP: Automotive Ethernet switch application board

OM14510/SJA1105TJP is an application board used to evaluate SJA1105EL and SJA1105TEL

Schematic PCB

TJA1100HN 100BASE-T1 Automotive Ethernet PHY - Customer Evaluation Board

The OM14500/TJA1100 is designed for rapid evaluation of the TJA1100HN PHY. It has direct access to MDI and MII/RMII interfaces and chip configuration bits

Schematic PCB

OM26630FDK: CLRC663 + NFC front-end development kit for access management applications

Schematic PCB

OM13500: PCA8538 Evaluation Board

OM13503: PCA8539 Demonstration Board

NTAG I ² C + Explorer Kit with NFC Reader

Schematic PCB

PEGODA contactless smart card reader based on MFRC523

PEGODA contactless smart card reader based on MFRC523

Schematic PCB

NTAGI²C Plus Flex Kit, includes additional Flex Antenna

The add-on kit for the NTAG I²C+ Explorer Kit (Interconnected NFC Tag) contains Category 4, Category 5 and Category 6 Flex antennas.

Schematic PCB

SJA1105Q-EVB: Ethernet switch and PHY evaluation board.

ADTJA1101-RMII: TJA1101 Automotive Ethernet Adapter for S32K148EVB and i.MX8

OM13587: PTN5110 Type-C Demonstration Kit

The PTN5110 Type-C demo kit shows a fully functional USB PD connection between DFP and UFP. The motherboard and docking board can also be ordered separately.

Schematic PCB

OM5578: Development kit for the PN7150 plug-and-play NFC controller

PN7150 development kit for RaspberryPi, BeagleBone Black and boards with Arduino interface, including: LPCXpresso, Kinetis Freedom and i.MX boards.

Schematic PCB

RDDRONE-T1ADAPT: Ethernet media converter for drones, rovers, mobile robots and cars

OM6270: SPI/I ² C to UART Bridge Demonstration Board (SC16IS750)

OM6270 is a demonstration board for SC16IS750. SC16IS740/750/760 is a slave I ² C bus/SPI interface that connects to a single-channel high-performance UART .

OM13529UL: PCAL6524/(EV-VFBGA36)(S500)Fm+ I2C 24-bit GPIO Demonstration Board

OM13790 Host & Dock: USB Type-C Shield Board Gen 2 with Display Port Alt Mode

The NXP Gen 2 USB Type-C shield works with the MCUXpresso SDK and USB power delivery stack, giving you access to your choice of Kinetis®, LPC and i.MX RT development platforms via the USB Type-C connector. And it uses NXP’s easy-to-use hardware and MCUXpresso software and tools (the only similar solution on the market) to shorten the learning curve. It enables Type-C to seamlessly support Display Port alt mode and provides extensive overvoltage protection services for a simple and efficient design.